Ariston Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
Electric oven will not heat, display shows F01 shortly after a cooking program is selected.
Main Power Relay / Control Board Failure
F02
Oven does not reach set temperature, display shows F02 after some minutes of operation.
Oven Temperature Sensor (NTC) Fault
F03
Oven overheats, may burn food quickly, and F03 appears on the display or the oven shuts down.
Overtemperature / Safety Thermostat Trip
F04
Electric oven does not heat on any function, F04 displayed shortly after start.
Heating Element Circuit Failure
F05
Oven fan does not run in fan-assisted modes, F05 error appears and heating may stop.
Convection Fan Motor Fault
F06
Oven display and buttons unresponsive or random beeping, F06 shown on the display.
User Interface / Keypad Communication Error
F07
Oven display shows F07 and the cavity light and functions may not operate correctly.
Door Lock / Door Switch Fault (Pyrolytic or Safety Lock Models)
F08
Oven interior light does not work and F08 may appear when trying to turn the light on.
Oven Lamp Circuit Fault
F09
Display shows F09 and the oven may behave erratically or not start.
EEPROM / Configuration Data Error
F10
Induction or ceramic cooktop zone does not heat and F10 appears on the hob display.
Cooktop Power Module Overtemperature
F11
One or more induction zones do not detect pans and F11 is shown on the zone display.
Induction Coil or Power Module Fault
F12
All cooktop zones are disabled and F12 appears on the main hob display.
Cooktop User Interface to Power Board Communication Error
F13
Induction hob shows F13 and shuts down when a zone is used at high power.
Cooktop Supply Voltage / Power Error
F14
Ceramic hob zone does not heat and F14 appears on the zone display.
Radiant Heating Element Fault (Ceramic Zone)
F15
Induction hob displays F15 and beeps, zones may switch off unexpectedly.
Pan Detection / Sensor Error
F20
Gas oven fails to ignite, display shows F20 after several ignition attempts.
Gas Oven Ignition Failure
F21
Gas cooktop burners do not spark, F21 or a similar ignition error appears on electronic models.
Cooktop Ignition System Failure
F30
Oven fan runs but there is no heat and F30 is displayed.
Triac / Relay Failure for Heating Elements
F40
Oven display shows F40 and the clock or timer cannot be set.
Clock / Timer Module Fault
F50
Pyrolytic self-clean cycle will not start, F50 displayed.
Pyrolytic Lock / Temperature Safety Fault
Symptom
Continuous clicking of igniters on Ariston gas cooktop even when all knobs are off.
Stuck Ignition Switch or Moisture in Ignition System
Symptom
Cooktop glass or enamel surface is cracked or badly chipped.
Damaged Hob Surface
Symptom
Cooktop trips the circuit breaker or RCD when a zone is turned on.
Short Circuit or Earth Leakage in Zone
Symptom
Electric oven does not heat but the fan and light work; no error code displayed.
Open Heating Element or Selector Switch Fault
Symptom
Gas cooktop burner flame is yellow and produces soot on pans.
Incorrect Air–Gas Mixture / Burner Contamination
Symptom
Gas cooktop burner goes out when knob is released, even though it lights initially.
Flame Failure Device (Thermocouple) Not Holding
Symptom
Gas cooktop burner will not ignite but lights with a match.
Individual Burner Ignition Failure
Symptom
Gas smell around Ariston range or cooktop during or after use.
Gas Leak or Incomplete Combustion
Symptom
Induction or ceramic cooktop controls do not respond; touch panel seems dead but power is present.
Touch Control Panel Failure or Locked Controls
Symptom
Oven clock resets to 0:00 every time power is switched off or briefly interrupted.
Clock Memory / Backup Failure
Symptom
Oven cooling fan runs continuously long after cooking has finished.
Cooling Fan Control / Thermostat Stuck
Symptom
Oven display is blank and oven does not respond, but power is present at the outlet.
No Power to Control Board
Symptom
Oven door glass is loose, rattling, or has condensation between panes.
Door Glass Assembly / Seal Failure
Symptom
Oven door will not close fully or pops open slightly during cooking.
Door Hinge or Hinge Receiver Wear
Symptom
Oven emits burning smell or smoke during normal cooking (not first use or pyrolytic).
Grease or Food Residue Burning / Electrical Overheating
Symptom
Oven interior light stays on even when the door is closed.
Door Switch Stuck or Faulty
Symptom
Oven light and display work but oven will not start heating until the clock is set.
Timer Not Set / Child Lock or Auto Mode Active
Symptom
Oven makes loud rattling or grinding noise when the fan is running.
Fan Motor Bearing Wear or Loose Fan Blade
Symptom
Oven takes a very long time to reach temperature or never reaches the set temperature.
Weak Heating or Temperature Regulation Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
Electric oven will not heat, display shows F01 shortly after a cooking program is selected.
|
Main Power Relay / Control Board Failure | View Details |
| F02 |
Oven does not reach set temperature, display shows F02 after some minutes of operation.
|
Oven Temperature Sensor (NTC) Fault | View Details |
| F03 |
Oven overheats, may burn food quickly, and F03 appears on the display or the oven shuts down.
|
Overtemperature / Safety Thermostat Trip | View Details |
| F04 |
Electric oven does not heat on any function, F04 displayed shortly after start.
|
Heating Element Circuit Failure | View Details |
| F05 |
Oven fan does not run in fan-assisted modes, F05 error appears and heating may stop.
|
Convection Fan Motor Fault | View Details |
| F06 |
Oven display and buttons unresponsive or random beeping, F06 shown on the display.
|
User Interface / Keypad Communication Error | View Details |
| F07 |
Oven display shows F07 and the cavity light and functions may not operate correctly.
|
Door Lock / Door Switch Fault (Pyrolytic or Safety Lock Models) | View Details |
| F08 |
Oven interior light does not work and F08 may appear when trying to turn the light on.
|
Oven Lamp Circuit Fault | View Details |
| F09 |
Display shows F09 and the oven may behave erratically or not start.
|
EEPROM / Configuration Data Error | View Details |
| F10 |
Induction or ceramic cooktop zone does not heat and F10 appears on the hob display.
|
Cooktop Power Module Overtemperature | View Details |
| F11 |
One or more induction zones do not detect pans and F11 is shown on the zone display.
|
Induction Coil or Power Module Fault | View Details |
| F12 |
All cooktop zones are disabled and F12 appears on the main hob display.
|
Cooktop User Interface to Power Board Communication Error | View Details |
| F13 |
Induction hob shows F13 and shuts down when a zone is used at high power.
|
Cooktop Supply Voltage / Power Error | View Details |
| F14 |
Ceramic hob zone does not heat and F14 appears on the zone display.
|
Radiant Heating Element Fault (Ceramic Zone) | View Details |
| F15 |
Induction hob displays F15 and beeps, zones may switch off unexpectedly.
|
Pan Detection / Sensor Error | View Details |
| F20 |
Gas oven fails to ignite, display shows F20 after several ignition attempts.
|
Gas Oven Ignition Failure | View Details |
| F21 |
Gas cooktop burners do not spark, F21 or a similar ignition error appears on electronic models.
|
Cooktop Ignition System Failure | View Details |
| F30 |
Oven fan runs but there is no heat and F30 is displayed.
|
Triac / Relay Failure for Heating Elements | View Details |
| F40 |
Oven display shows F40 and the clock or timer cannot be set.
|
Clock / Timer Module Fault | View Details |
| F50 |
Pyrolytic self-clean cycle will not start, F50 displayed.
|
Pyrolytic Lock / Temperature Safety Fault | View Details |
| – |
Continuous clicking of igniters on Ariston gas cooktop even when all knobs are off.
|
Stuck Ignition Switch or Moisture in Ignition System | View Details |
| – |
Cooktop glass or enamel surface is cracked or badly chipped.
|
Damaged Hob Surface | View Details |
| – |
Cooktop trips the circuit breaker or RCD when a zone is turned on.
|
Short Circuit or Earth Leakage in Zone | View Details |
| – |
Electric oven does not heat but the fan and light work; no error code displayed.
|
Open Heating Element or Selector Switch Fault | View Details |
| – |
Gas cooktop burner flame is yellow and produces soot on pans.
|
Incorrect Air–Gas Mixture / Burner Contamination | View Details |
| – |
Gas cooktop burner goes out when knob is released, even though it lights initially.
|
Flame Failure Device (Thermocouple) Not Holding | View Details |
| – |
Gas cooktop burner will not ignite but lights with a match.
|
Individual Burner Ignition Failure | View Details |
| – |
Gas smell around Ariston range or cooktop during or after use.
|
Gas Leak or Incomplete Combustion | View Details |
| – |
Induction or ceramic cooktop controls do not respond; touch panel seems dead but power is present.
|
Touch Control Panel Failure or Locked Controls | View Details |
| – |
Oven clock resets to 0:00 every time power is switched off or briefly interrupted.
|
Clock Memory / Backup Failure | View Details |
| – |
Oven cooling fan runs continuously long after cooking has finished.
|
Cooling Fan Control / Thermostat Stuck | View Details |
| – |
Oven display is blank and oven does not respond, but power is present at the outlet.
|
No Power to Control Board | View Details |
| – |
Oven door glass is loose, rattling, or has condensation between panes.
|
Door Glass Assembly / Seal Failure | View Details |
| – |
Oven door will not close fully or pops open slightly during cooking.
|
Door Hinge or Hinge Receiver Wear | View Details |
| – |
Oven emits burning smell or smoke during normal cooking (not first use or pyrolytic).
|
Grease or Food Residue Burning / Electrical Overheating | View Details |
| – |
Oven interior light stays on even when the door is closed.
|
Door Switch Stuck or Faulty | View Details |
| – |
Oven light and display work but oven will not start heating until the clock is set.
|
Timer Not Set / Child Lock or Auto Mode Active | View Details |
| – |
Oven makes loud rattling or grinding noise when the fan is running.
|
Fan Motor Bearing Wear or Loose Fan Blade | View Details |
| – |
Oven takes a very long time to reach temperature or never reaches the set temperature.
|
Weak Heating or Temperature Regulation Fault | View Details |
No matching codes found
Advertisements