DeLonghi Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
Electric oven will not heat, display shows F01 shortly after a cooking program is started.
Main Oven Temperature Sensor Circuit Fault
F02
Electric oven overheats, display shows F02 and the oven switches off or locks out.
Oven Overtemperature / Sensor Range Error
F03
Multifunction oven does not reach set temperature, display shows F03 during preheat.
Oven Heating Circuit Failure
F04
Display shows F04 and oven functions are disabled; sometimes occurs after a power surge.
Main Electronic Control Board Communication / Internal Fault
F05
Oven display shows F05 and the cooling fan runs continuously or not at all.
Cooling Fan Circuit Fault
F06
Gas oven will not ignite, display shows F06 after several failed ignition attempts.
Gas Oven Ignition Failure
F07
Gas cooktop burners fail to ignite, display or indicator shows F07 or flashing burner symbol.
Cooktop Burner Ignition Fault
F08
Induction cooktop zone does not heat and shows F08 or similar fault code on the glass display.
Induction Power Module Overheat / Protection Trip
F09
Induction cooktop zone will not detect pan and shows F09 or pan symbol flashing.
Pan Detection / Induction Coil Fault
F10
Oven display shows F10 and the door will not lock for pyrolytic self-cleaning.
Oven Door Lock Mechanism Fault
F11
Display shows F11 and oven controls are unresponsive or random functions activate.
Touch Control Panel / Keypad Fault
F12
Display shows F12 and oven functions are disabled after a power interruption.
Oven Temperature Calibration / EEPROM Error
F13
Display shows F13 and the auxiliary oven or grill does not heat.
Secondary Oven / Grill Temperature Sensor Fault
F14
Induction cooktop shows F14 and all zones shut down simultaneously.
Induction Power Supply / DC Bus Fault
F15
Display shows F15 and the oven interior light and fan do not operate when a program is selected.
Oven Auxiliary Power / Low-Voltage Supply Fault
F16
Oven display shows F16 and the cooling fan runs continuously even when the oven is off.
Cooling Fan Relay Stuck / Control Logic Fault
F17
Induction cooktop shows F17 when a zone is set to high power and then shuts down that zone.
Induction Zone Overcurrent / Power Limitation Fault
F18
Oven display shows F18 and the grill element does not heat.
Grill Element Circuit Fault
F19
Oven display shows F19 and the fan-forced mode does not operate; fan does not spin.
Convection Fan Motor Fault
F20
Oven display shows F20 and the clock/timer cannot be set; oven will not start.
Clock / Timer Module Fault
Symptom
All gas cooktop burners continuously click even after flame is established.
Ignition System Stuck On
Symptom
Clock and timer reset every time power is cycled; oven loses settings.
Non-Volatile Memory / Backup Power Failure
Symptom
Control knobs on range or cooktop are very stiff or hard to turn.
Stiff Gas Valve or Selector Shaft
Symptom
Cooktop glass or stainless surface gets excessively hot around burners or control panel.
Overheating of Cooktop Surface
Symptom
Digital display on DeLonghi range is blank or very dim, but oven may still heat.
Display Module Power or Backlight Failure
Symptom
Electric oven does not heat at all; display and lights work but no elements get hot.
No Power to Heating Elements
Symptom
Gas cooktop burner flame is yellow, noisy, or lifts off the burner ports.
Incorrect Gas-Air Mixture / Burner Adjustment Issue
Symptom
Gas cooktop burner goes out on low setting or cannot be adjusted to a stable simmer.
Incorrect Minimum Flame Adjustment
Symptom
Gas cooktop burner will not ignite but lights with a match; clicking sound may or may not be present.
Individual Burner Ignition Failure
Symptom
Induction cooktop makes loud buzzing or humming noise at certain power levels.
Induction Acoustic Noise / Coil Vibration
Symptom
Oven door will not close fully; heat escapes and cooking is uneven.
Door Hinge or Seal Misalignment
Symptom
Oven door will not open after self-clean cycle; display may be off or normal.
Door Lock Stuck Closed
Symptom
Oven heats but takes much longer than normal to reach temperature; food undercooked.
Reduced Heating Performance
Symptom
Oven interior light does not work, but oven heats normally.
Oven Lamp Circuit Failure
Symptom
Oven makes loud rattling or grinding noise when the fan-forced mode is used.
Convection Fan Mechanical Noise
Symptom
Oven overheats and burns food even at low temperature settings.
Oven Temperature Regulation Failure
Symptom
Range trips the household circuit breaker or RCD when oven or cooktop is used.
Electrical Short or Earth Leakage
Symptom
Strong burning smell or smoke from oven during normal cooking (not first use or self-clean).
Excessive Grease or Food Residue Burning
Symptom
Strong gas smell around DeLonghi range or cooktop, especially when not in use.
Gas Leak in Supply or Burner Circuit
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
Electric oven will not heat, display shows F01 shortly after a cooking program is started.
|
Main Oven Temperature Sensor Circuit Fault | View Details |
| F02 |
Electric oven overheats, display shows F02 and the oven switches off or locks out.
|
Oven Overtemperature / Sensor Range Error | View Details |
| F03 |
Multifunction oven does not reach set temperature, display shows F03 during preheat.
|
Oven Heating Circuit Failure | View Details |
| F04 |
Display shows F04 and oven functions are disabled; sometimes occurs after a power surge.
|
Main Electronic Control Board Communication / Internal Fault | View Details |
| F05 |
Oven display shows F05 and the cooling fan runs continuously or not at all.
|
Cooling Fan Circuit Fault | View Details |
| F06 |
Gas oven will not ignite, display shows F06 after several failed ignition attempts.
|
Gas Oven Ignition Failure | View Details |
| F07 |
Gas cooktop burners fail to ignite, display or indicator shows F07 or flashing burner symbol.
|
Cooktop Burner Ignition Fault | View Details |
| F08 |
Induction cooktop zone does not heat and shows F08 or similar fault code on the glass display.
|
Induction Power Module Overheat / Protection Trip | View Details |
| F09 |
Induction cooktop zone will not detect pan and shows F09 or pan symbol flashing.
|
Pan Detection / Induction Coil Fault | View Details |
| F10 |
Oven display shows F10 and the door will not lock for pyrolytic self-cleaning.
|
Oven Door Lock Mechanism Fault | View Details |
| F11 |
Display shows F11 and oven controls are unresponsive or random functions activate.
|
Touch Control Panel / Keypad Fault | View Details |
| F12 |
Display shows F12 and oven functions are disabled after a power interruption.
|
Oven Temperature Calibration / EEPROM Error | View Details |
| F13 |
Display shows F13 and the auxiliary oven or grill does not heat.
|
Secondary Oven / Grill Temperature Sensor Fault | View Details |
| F14 |
Induction cooktop shows F14 and all zones shut down simultaneously.
|
Induction Power Supply / DC Bus Fault | View Details |
| F15 |
Display shows F15 and the oven interior light and fan do not operate when a program is selected.
|
Oven Auxiliary Power / Low-Voltage Supply Fault | View Details |
| F16 |
Oven display shows F16 and the cooling fan runs continuously even when the oven is off.
|
Cooling Fan Relay Stuck / Control Logic Fault | View Details |
| F17 |
Induction cooktop shows F17 when a zone is set to high power and then shuts down that zone.
|
Induction Zone Overcurrent / Power Limitation Fault | View Details |
| F18 |
Oven display shows F18 and the grill element does not heat.
|
Grill Element Circuit Fault | View Details |
| F19 |
Oven display shows F19 and the fan-forced mode does not operate; fan does not spin.
|
Convection Fan Motor Fault | View Details |
| F20 |
Oven display shows F20 and the clock/timer cannot be set; oven will not start.
|
Clock / Timer Module Fault | View Details |
| – |
All gas cooktop burners continuously click even after flame is established.
|
Ignition System Stuck On | View Details |
| – |
Clock and timer reset every time power is cycled; oven loses settings.
|
Non-Volatile Memory / Backup Power Failure | View Details |
| – |
Control knobs on range or cooktop are very stiff or hard to turn.
|
Stiff Gas Valve or Selector Shaft | View Details |
| – |
Cooktop glass or stainless surface gets excessively hot around burners or control panel.
|
Overheating of Cooktop Surface | View Details |
| – |
Digital display on DeLonghi range is blank or very dim, but oven may still heat.
|
Display Module Power or Backlight Failure | View Details |
| – |
Electric oven does not heat at all; display and lights work but no elements get hot.
|
No Power to Heating Elements | View Details |
| – |
Gas cooktop burner flame is yellow, noisy, or lifts off the burner ports.
|
Incorrect Gas-Air Mixture / Burner Adjustment Issue | View Details |
| – |
Gas cooktop burner goes out on low setting or cannot be adjusted to a stable simmer.
|
Incorrect Minimum Flame Adjustment | View Details |
| – |
Gas cooktop burner will not ignite but lights with a match; clicking sound may or may not be present.
|
Individual Burner Ignition Failure | View Details |
| – |
Induction cooktop makes loud buzzing or humming noise at certain power levels.
|
Induction Acoustic Noise / Coil Vibration | View Details |
| – |
Oven door will not close fully; heat escapes and cooking is uneven.
|
Door Hinge or Seal Misalignment | View Details |
| – |
Oven door will not open after self-clean cycle; display may be off or normal.
|
Door Lock Stuck Closed | View Details |
| – |
Oven heats but takes much longer than normal to reach temperature; food undercooked.
|
Reduced Heating Performance | View Details |
| – |
Oven interior light does not work, but oven heats normally.
|
Oven Lamp Circuit Failure | View Details |
| – |
Oven makes loud rattling or grinding noise when the fan-forced mode is used.
|
Convection Fan Mechanical Noise | View Details |
| – |
Oven overheats and burns food even at low temperature settings.
|
Oven Temperature Regulation Failure | View Details |
| – |
Range trips the household circuit breaker or RCD when oven or cooktop is used.
|
Electrical Short or Earth Leakage | View Details |
| – |
Strong burning smell or smoke from oven during normal cooking (not first use or self-clean).
|
Excessive Grease or Food Residue Burning | View Details |
| – |
Strong gas smell around DeLonghi range or cooktop, especially when not in use.
|
Gas Leak in Supply or Burner Circuit | View Details |
No matching codes found
Advertisements