GE Profile UltraFast
GE Profile UltraFast Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
1C
Washer-dryer will not start a cycle; display shows 1C shortly after pressing Start.
Water Inlet Temperature Sensor Error
1F
Cycle stops or will not start; display shows 1F and unit may beep.
Water Level Sensor (Pressure Sensor) Error
1H
Dryer portion will not heat properly; display shows 1H during dry or wash+dry cycles.
Dryer Outlet Thermistor / Temperature Sensor Fault
1L
Washer-dryer will not start; display shows 1L and door may not lock.
Door Lock Circuit Error
1U
Unit powers on but controls are unresponsive or erratic; 1U appears on the display.
User Interface Communication Error
2C
Washer-dryer stops mid-cycle; 2C appears and unit may not drain properly.
Drain Pump Circuit Error
2F
Dryer function stops or does not start; 2F appears on the display.
Dryer Fan / Blower Motor Error
2H
Dryer overheats or shuts down with 2H error; clothes may feel excessively hot.
High-Limit Thermostat / Overheat Protection Trip
2L
Washer-dryer displays 2L and may not spin or agitate correctly.
Low Voltage or Power Supply Error
2U
Display shows 2U and the unit may shut down unexpectedly during operation.
Overvoltage / Power Surge Detected
3C
Washer-dryer will not spin or agitate; 3C appears on the display.
Drive Motor / Inverter Error
3F
Dryer drum does not turn; 3F appears when attempting a dry cycle.
Dryer Drive Motor or Belt Error
3H
Dryer does not heat; 3H appears during dry cycles.
Heater Element or Heating Circuit Error
3L
Washer-dryer displays 3L and may not lock the door or start high-speed spin.
Door Lock Feedback Error
3U
Display shows 3U and the unit may randomly pause or reset during operation.
Internal Communication / Control Board Error
4C
Washer-dryer will not fill with water; 4C appears on the display.
Water Supply / Fill Error
4F
Washer-dryer stops with 4F; water may be present in the drum and not draining.
Drain Timeout / Drain Failure
4H
Washer-dryer displays 4H and may stop heating water during wash cycles.
Water Heater / Internal Heater Error
4L
Washer-dryer shows 4L and may not advance from fill to wash.
Low Water Level Not Reached
4U
Display shows 4U and the unit may not respond to certain cycle selections.
Cycle Configuration / Software Error
5C
Washer-dryer stops with 5C; drum may be unbalanced and not reaching full spin speed.
Unbalanced Load / Spin Error
5F
Dryer cycle ends quickly with clothes still wet; 5F appears on the display.
Moisture Sensor / Dryness Detection Error
5H
Dryer overheats or shuts off with 5H; may feel very hot to the touch.
Dryer Exhaust / Airflow Restriction
5L
Washer-dryer displays 5L and may not start; often associated with child lock or control lock.
Control Lock / Child Lock Engaged
5U
Display shows 5U and the unit may not complete cycles reliably.
Software / Program Execution Error
Symptom
Burning smell or hot plastic odor during operation.
Overheating Electrical or Mechanical Component
Symptom
Detergent remains in the dispenser drawer at the end of the cycle.
Dispenser Water Flow / Siphon Fault
Symptom
Dryer runs but clothes come out wrinkled and damp in spots.
Drum Tumble / Airflow Distribution Issue
Symptom
Dryer runs but takes a very long time to dry clothes.
Poor Drying Performance / Airflow or Heating Issue
Symptom
Grinding or rumbling noise during wash or spin, increasing over time.
Tub Bearing or Drive System Wear
Symptom
Loud banging or knocking noise during spin cycle.
Suspension or Drum Imbalance Fault
Symptom
Washer-dryer combo is leaking water from the front or bottom during wash cycles.
Door Gasket or Hose Leak
Symptom
Washer-dryer displays incorrect water temperature (e.g., hot when set to cold).
Water Temperature Mixing / Valve Misrouting
Symptom
Washer-dryer does not power on at all; no lights or display.
No Power / Dead Control
Symptom
Washer-dryer door will not unlock at the end of the cycle; no error code displayed.
Door Lock Stuck / Drain Not Completed
Symptom
Washer-dryer has a persistent musty or moldy odor, especially inside the drum.
Biofilm / Mold Growth in Drum and Dispenser
Symptom
Washer-dryer intermittently shuts off or resets mid-cycle without an error code.
Intermittent Power or Control Failure
Symptom
Washer-dryer leaves clothes soaking wet at the end of the cycle.
No or Low Spin Performance
Symptom
Washer-dryer makes a squealing or chirping noise during spin or dry cycles.
Belt or Idler Pulley Noise
Symptom
Washer-dryer vibrates excessively and "walks" across the floor during spin.
Excessive Vibration / Installation or Suspension Issue
Symptom
Washer-dryer will not start a cycle; display is on but Start button does nothing.
Start Circuit / User Interface Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| 1C |
Washer-dryer will not start a cycle; display shows 1C shortly after pressing Start.
|
Water Inlet Temperature Sensor Error | View Details |
| 1F |
Cycle stops or will not start; display shows 1F and unit may beep.
|
Water Level Sensor (Pressure Sensor) Error | View Details |
| 1H |
Dryer portion will not heat properly; display shows 1H during dry or wash+dry cycles.
|
Dryer Outlet Thermistor / Temperature Sensor Fault | View Details |
| 1L |
Washer-dryer will not start; display shows 1L and door may not lock.
|
Door Lock Circuit Error | View Details |
| 1U |
Unit powers on but controls are unresponsive or erratic; 1U appears on the display.
|
User Interface Communication Error | View Details |
| 2C |
Washer-dryer stops mid-cycle; 2C appears and unit may not drain properly.
|
Drain Pump Circuit Error | View Details |
| 2F |
Dryer function stops or does not start; 2F appears on the display.
|
Dryer Fan / Blower Motor Error | View Details |
| 2H |
Dryer overheats or shuts down with 2H error; clothes may feel excessively hot.
|
High-Limit Thermostat / Overheat Protection Trip | View Details |
| 2L |
Washer-dryer displays 2L and may not spin or agitate correctly.
|
Low Voltage or Power Supply Error | View Details |
| 2U |
Display shows 2U and the unit may shut down unexpectedly during operation.
|
Overvoltage / Power Surge Detected | View Details |
| 3C |
Washer-dryer will not spin or agitate; 3C appears on the display.
|
Drive Motor / Inverter Error | View Details |
| 3F |
Dryer drum does not turn; 3F appears when attempting a dry cycle.
|
Dryer Drive Motor or Belt Error | View Details |
| 3H |
Dryer does not heat; 3H appears during dry cycles.
|
Heater Element or Heating Circuit Error | View Details |
| 3L |
Washer-dryer displays 3L and may not lock the door or start high-speed spin.
|
Door Lock Feedback Error | View Details |
| 3U |
Display shows 3U and the unit may randomly pause or reset during operation.
|
Internal Communication / Control Board Error | View Details |
| 4C |
Washer-dryer will not fill with water; 4C appears on the display.
|
Water Supply / Fill Error | View Details |
| 4F |
Washer-dryer stops with 4F; water may be present in the drum and not draining.
|
Drain Timeout / Drain Failure | View Details |
| 4H |
Washer-dryer displays 4H and may stop heating water during wash cycles.
|
Water Heater / Internal Heater Error | View Details |
| 4L |
Washer-dryer shows 4L and may not advance from fill to wash.
|
Low Water Level Not Reached | View Details |
| 4U |
Display shows 4U and the unit may not respond to certain cycle selections.
|
Cycle Configuration / Software Error | View Details |
| 5C |
Washer-dryer stops with 5C; drum may be unbalanced and not reaching full spin speed.
|
Unbalanced Load / Spin Error | View Details |
| 5F |
Dryer cycle ends quickly with clothes still wet; 5F appears on the display.
|
Moisture Sensor / Dryness Detection Error | View Details |
| 5H |
Dryer overheats or shuts off with 5H; may feel very hot to the touch.
|
Dryer Exhaust / Airflow Restriction | View Details |
| 5L |
Washer-dryer displays 5L and may not start; often associated with child lock or control lock.
|
Control Lock / Child Lock Engaged | View Details |
| 5U |
Display shows 5U and the unit may not complete cycles reliably.
|
Software / Program Execution Error | View Details |
| – |
Burning smell or hot plastic odor during operation.
|
Overheating Electrical or Mechanical Component | View Details |
| – |
Detergent remains in the dispenser drawer at the end of the cycle.
|
Dispenser Water Flow / Siphon Fault | View Details |
| – |
Dryer runs but clothes come out wrinkled and damp in spots.
|
Drum Tumble / Airflow Distribution Issue | View Details |
| – |
Dryer runs but takes a very long time to dry clothes.
|
Poor Drying Performance / Airflow or Heating Issue | View Details |
| – |
Grinding or rumbling noise during wash or spin, increasing over time.
|
Tub Bearing or Drive System Wear | View Details |
| – |
Loud banging or knocking noise during spin cycle.
|
Suspension or Drum Imbalance Fault | View Details |
| – |
Washer-dryer combo is leaking water from the front or bottom during wash cycles.
|
Door Gasket or Hose Leak | View Details |
| – |
Washer-dryer displays incorrect water temperature (e.g., hot when set to cold).
|
Water Temperature Mixing / Valve Misrouting | View Details |
| – |
Washer-dryer does not power on at all; no lights or display.
|
No Power / Dead Control | View Details |
| – |
Washer-dryer door will not unlock at the end of the cycle; no error code displayed.
|
Door Lock Stuck / Drain Not Completed | View Details |
| – |
Washer-dryer has a persistent musty or moldy odor, especially inside the drum.
|
Biofilm / Mold Growth in Drum and Dispenser | View Details |
| – |
Washer-dryer intermittently shuts off or resets mid-cycle without an error code.
|
Intermittent Power or Control Failure | View Details |
| – |
Washer-dryer leaves clothes soaking wet at the end of the cycle.
|
No or Low Spin Performance | View Details |
| – |
Washer-dryer makes a squealing or chirping noise during spin or dry cycles.
|
Belt or Idler Pulley Noise | View Details |
| – |
Washer-dryer vibrates excessively and "walks" across the floor during spin.
|
Excessive Vibration / Installation or Suspension Issue | View Details |
| – |
Washer-dryer will not start a cycle; display is on but Start button does nothing.
|
Start Circuit / User Interface Fault | View Details |
No matching codes found
Advertisements