Fulgor Milano Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher will not fill with water; cycle starts then stops with E1 on the display.
Water Inlet Timeout / No Fill
E10
Dishwasher displays E10 and will not start the wash cycle; door appears closed but machine thinks it is open.
Door Lock / Door Switch Fault
E11
Dishwasher shows E11; display or control panel buttons may be unresponsive or behave erratically.
User Interface / Control Panel Communication Error
E12
Dishwasher displays E12 and may stop during the wash; water level and heating seem normal.
Turbidity Sensor / Optical Sensor Fault
E13
Dishwasher shows E13; water temperature may be excessively high or the cycle aborts shortly after heating begins.
Overheating / High Temperature Error
E14
Dishwasher displays E14 and may not complete the cycle; water usage seems abnormal (too much or too little).
Flow Meter / Water Intake Measurement Error
E15
Dishwasher shows E15 and will not start; drain pump may run continuously even when there is no water in the tub.
Base Pan Leak / Anti-Flood Triggered
E16
Dishwasher displays E16; water continues to enter even when the machine is off or during standby.
Inlet Valve Stuck Open
E17
Dishwasher shows E17; fill is extremely slow or stops, often in homes with low water pressure.
Low Water Pressure / Fill Error
E18
Dishwasher displays E18; drain time is excessive and water may remain in the tub at the end of the cycle.
Drain Time Exceeded
E19
Dishwasher shows E19; water softener or detergent dispenser functions erratically.
Auxiliary Valve / Dispenser Control Error
E2
Dishwasher fills but does not heat; cycles run cold and E2 is displayed near the end of the program.
Heating Circuit Failure
E20
Dishwasher displays E20; motor-related error with possible humming or no wash action.
Motor Start / Overcurrent Error
E3
Dishwasher does not drain; standing water remains in the tub and E3 is shown on the display.
Drain Pump or Drainage Fault
E4
Dishwasher overfills or shows E4; water may be found in the base pan and the unit may run the drain pump continuously.
Overflow / Anti-Flood Activation
E5
Dishwasher stops mid-cycle with E5; water level appears too low or spray arms do not rotate properly.
Insufficient Water Level / Fill Sensor Error
E6
Dishwasher displays E6 and stops; water may be present but circulation is weak or absent.
Circulation Pump Failure
E7
Dishwasher shows E7; drying performance is poor and sometimes a burning smell is noticed near the door.
Drying Fan or Ventilation Fault
E8
Dishwasher displays E8 and the water softener does not seem to regenerate; white spots appear on dishes.
Water Softener / Regeneration Valve Fault
E9
Dishwasher shows E9 and may stop shortly after starting; sometimes accompanied by unusual noises from the sump area.
Sump Temperature Sensor / NTC Error
Symptom
Dishes are not getting clean; food particles remain on plates and glasses after the cycle.
Poor Wash Performance / Low Spray Pressure
Symptom
Dishwasher displays no error but water remains in the bottom after the cycle completes.
Residual Water / Partial Drain
Symptom
Dishwasher does not start at all; no lights on the control panel.
No Power / Dead Appliance
Symptom
Dishwasher door falls open quickly or will not stay in the desired position.
Door Spring / Cable Failure
Symptom
Dishwasher door is difficult to close or rubs against the cabinet.
Cabinet Misalignment / Hinge Deformation
Symptom
Dishwasher emits a burning or electrical smell during operation.
Overheating Electrical Component
Symptom
Dishwasher has a persistent bad odor even after running cycles.
Organic Build-Up / Biofilm in Sump and Hoses
Symptom
Dishwasher interior remains wet and dishes are not dry at the end of the cycle.
Poor Drying Performance
Symptom
Dishwasher leaks from the left or right side under the cabinet, with water pooling on the floor.
Side Hose or Sump Seal Leak
Symptom
Dishwasher leaks water from the bottom front of the door during the wash cycle.
Door Gasket or Door Alignment Leak
Symptom
Dishwasher leaves detergent tablet partially undissolved in the dispenser.
Detergent Dispenser / Spray Coverage Issue
Symptom
Dishwasher leaves water spots and film on glasses and dishes.
Rinse Aid / Water Softening Inefficiency
Symptom
Dishwasher makes loud grinding or rattling noises during the wash cycle.
Foreign Object in Pump or Spray Arm, Worn Pump Bearings
Symptom
Dishwasher powers on but will not start a cycle; Start button beeps or flashes and nothing happens.
Start Inhibit / Door or Program Selection Issue
Symptom
Dishwasher runs for an unusually long time; cycles seem to never finish.
Extended Cycle Duration / Sensor Misreading
Symptom
Dishwasher stops mid-cycle and shuts off completely without displaying an error.
Intermittent Power Loss / Overheating Protection
Symptom
Dishwasher vibrates excessively or moves within the cabinet during operation.
Excessive Vibration / Installation Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher will not fill with water; cycle starts then stops with E1 on the display.
|
Water Inlet Timeout / No Fill | View Details |
| E10 |
Dishwasher displays E10 and will not start the wash cycle; door appears closed but machine thinks it is open.
|
Door Lock / Door Switch Fault | View Details |
| E11 |
Dishwasher shows E11; display or control panel buttons may be unresponsive or behave erratically.
|
User Interface / Control Panel Communication Error | View Details |
| E12 |
Dishwasher displays E12 and may stop during the wash; water level and heating seem normal.
|
Turbidity Sensor / Optical Sensor Fault | View Details |
| E13 |
Dishwasher shows E13; water temperature may be excessively high or the cycle aborts shortly after heating begins.
|
Overheating / High Temperature Error | View Details |
| E14 |
Dishwasher displays E14 and may not complete the cycle; water usage seems abnormal (too much or too little).
|
Flow Meter / Water Intake Measurement Error | View Details |
| E15 |
Dishwasher shows E15 and will not start; drain pump may run continuously even when there is no water in the tub.
|
Base Pan Leak / Anti-Flood Triggered | View Details |
| E16 |
Dishwasher displays E16; water continues to enter even when the machine is off or during standby.
|
Inlet Valve Stuck Open | View Details |
| E17 |
Dishwasher shows E17; fill is extremely slow or stops, often in homes with low water pressure.
|
Low Water Pressure / Fill Error | View Details |
| E18 |
Dishwasher displays E18; drain time is excessive and water may remain in the tub at the end of the cycle.
|
Drain Time Exceeded | View Details |
| E19 |
Dishwasher shows E19; water softener or detergent dispenser functions erratically.
|
Auxiliary Valve / Dispenser Control Error | View Details |
| E2 |
Dishwasher fills but does not heat; cycles run cold and E2 is displayed near the end of the program.
|
Heating Circuit Failure | View Details |
| E20 |
Dishwasher displays E20; motor-related error with possible humming or no wash action.
|
Motor Start / Overcurrent Error | View Details |
| E3 |
Dishwasher does not drain; standing water remains in the tub and E3 is shown on the display.
|
Drain Pump or Drainage Fault | View Details |
| E4 |
Dishwasher overfills or shows E4; water may be found in the base pan and the unit may run the drain pump continuously.
|
Overflow / Anti-Flood Activation | View Details |
| E5 |
Dishwasher stops mid-cycle with E5; water level appears too low or spray arms do not rotate properly.
|
Insufficient Water Level / Fill Sensor Error | View Details |
| E6 |
Dishwasher displays E6 and stops; water may be present but circulation is weak or absent.
|
Circulation Pump Failure | View Details |
| E7 |
Dishwasher shows E7; drying performance is poor and sometimes a burning smell is noticed near the door.
|
Drying Fan or Ventilation Fault | View Details |
| E8 |
Dishwasher displays E8 and the water softener does not seem to regenerate; white spots appear on dishes.
|
Water Softener / Regeneration Valve Fault | View Details |
| E9 |
Dishwasher shows E9 and may stop shortly after starting; sometimes accompanied by unusual noises from the sump area.
|
Sump Temperature Sensor / NTC Error | View Details |
| – |
Dishes are not getting clean; food particles remain on plates and glasses after the cycle.
|
Poor Wash Performance / Low Spray Pressure | View Details |
| – |
Dishwasher displays no error but water remains in the bottom after the cycle completes.
|
Residual Water / Partial Drain | View Details |
| – |
Dishwasher does not start at all; no lights on the control panel.
|
No Power / Dead Appliance | View Details |
| – |
Dishwasher door falls open quickly or will not stay in the desired position.
|
Door Spring / Cable Failure | View Details |
| – |
Dishwasher door is difficult to close or rubs against the cabinet.
|
Cabinet Misalignment / Hinge Deformation | View Details |
| – |
Dishwasher emits a burning or electrical smell during operation.
|
Overheating Electrical Component | View Details |
| – |
Dishwasher has a persistent bad odor even after running cycles.
|
Organic Build-Up / Biofilm in Sump and Hoses | View Details |
| – |
Dishwasher interior remains wet and dishes are not dry at the end of the cycle.
|
Poor Drying Performance | View Details |
| – |
Dishwasher leaks from the left or right side under the cabinet, with water pooling on the floor.
|
Side Hose or Sump Seal Leak | View Details |
| – |
Dishwasher leaks water from the bottom front of the door during the wash cycle.
|
Door Gasket or Door Alignment Leak | View Details |
| – |
Dishwasher leaves detergent tablet partially undissolved in the dispenser.
|
Detergent Dispenser / Spray Coverage Issue | View Details |
| – |
Dishwasher leaves water spots and film on glasses and dishes.
|
Rinse Aid / Water Softening Inefficiency | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during the wash cycle.
|
Foreign Object in Pump or Spray Arm, Worn Pump Bearings | View Details |
| – |
Dishwasher powers on but will not start a cycle; Start button beeps or flashes and nothing happens.
|
Start Inhibit / Door or Program Selection Issue | View Details |
| – |
Dishwasher runs for an unusually long time; cycles seem to never finish.
|
Extended Cycle Duration / Sensor Misreading | View Details |
| – |
Dishwasher stops mid-cycle and shuts off completely without displaying an error.
|
Intermittent Power Loss / Overheating Protection | View Details |
| – |
Dishwasher vibrates excessively or moves within the cabinet during operation.
|
Excessive Vibration / Installation Issue | View Details |
No matching codes found
Advertisements