Zline
Zline Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher will not start a cycle and displays E1 shortly after pressing Start.
Water Inlet Timeout / Insufficient Fill
E10
Dishwasher shows E10; cycle may not start and door may not lock properly.
Door Lock / Door Switch Error
E11
Dishwasher displays E11; keypad buttons may not respond or random selections occur.
Touch Control / Keypad Communication Error
E12
Dishwasher shows E12; water may be too hot or cycle ends quickly with steam and strong odor.
Overheating / Temperature Sensor High Reading
E13
Dishwasher displays E13; unit may fill and drain repeatedly without washing properly.
Overfill / Overflow Level Error
E14
Dishwasher shows E14; cycle may abort early and water level appears low.
Low Water Level / Underfill Error
E15
Dishwasher displays E15; unit may not start and base pan may be dry or slightly damp.
Base Leak Sensor / Float Switch Activated
E16
Dishwasher shows E16; water may continuously enter even when the unit is off, or cycle overfills.
Water Inlet Valve Stuck Open
E17
Dishwasher displays E17; circulation may be weak and spray arms may not rotate properly.
Spray Pressure / Circulation Performance Error
E18
Dishwasher shows E18; drain pump may run continuously even when tub is empty.
Drain System / Siphon or Sensor Error
E19
Dishwasher displays E19; diverter may not change spray zones and only one rack gets water.
Diverter Valve / Zone Wash Error
E2
Dishwasher stops mid-cycle and displays E2; water remains in the tub and does not drain.
Drain Timeout / Drain Pump Fault
E20
Dishwasher shows E20; fan may run loudly or not at all during drying, and there may be condensation on the door.
Ventilation / Condensation Fan Error
E3
Dishwasher displays E3 and stops; water inside is cold and dishes are not getting clean.
Heating Circuit Failure / Water Not Reaching Temperature
E4
Dishwasher shows E4 and stops; there is water in the base pan or evidence of a leak under the unit.
Leak Detected / Overflow Protection Activated
E5
Dishwasher displays E5 and will not start or complete a cycle; may stop shortly after filling.
Water Level Sensor / Pressure Switch Error
E6
Dishwasher shows E6 and stops; water may be present but spray arms are not turning and dishes remain dirty.
Circulation Pump / Wash Motor Failure
E7
Dishwasher displays E7; cycle may not start or may stop unexpectedly, often with no water entering.
Flow Meter / Water Intake Sensing Error
E8
Dishwasher shows E8 and may stop during the drying phase; dishes remain wet and cool.
Drying System / Fan or Heater Error
E9
Dishwasher displays E9 and will not start; control panel may be unresponsive or behave erratically.
Control Board / EEPROM or Software Error
Symptom
Detergent tablet or powder remains in the dispenser at the end of the cycle.
Detergent Dispenser Not Opening or Blocked
Symptom
Dishes are not getting clean; food remains on plates and glasses after a full cycle.
Poor Wash Performance / Inadequate Cleaning
Symptom
Dishes remain wet at the end of the cycle; poor drying performance.
Poor Drying / Vent or Rinse Aid Problem
Symptom
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom of the tub.
Poor Drainage / Standing Water
Symptom
Dishwasher door falls open quickly or does not stay in the desired position.
Door Spring / Hinge Cable Failure
Symptom
Dishwasher door is hard to close or rubs against the cabinet.
Cabinet Misalignment / Hinge Interference
Symptom
Dishwasher emits a burning smell or electrical odor during operation.
Overheating Component / Electrical Fault
Symptom
Dishwasher fills with water but does not wash; you hear only a faint hum or nothing at all, and spray arms do not move.
Wash Motor / Circulation Pump Not Running
Symptom
Dishwasher has a bad odor, musty or rotten smell inside the tub.
Odor / Bacterial Growth and Residue
Symptom
Dishwasher leaks from underneath the unit onto the floor or into the cabinet base.
Underbody Leak / Pump or Hose Failure
Symptom
Dishwasher leaks water from the bottom of the door during the wash cycle.
Door Seal / Splash Leak
Symptom
Dishwasher makes a high-pitched squealing or whining noise during operation.
Pump Bearing Wear / Motor Noise
Symptom
Dishwasher makes loud grinding or rattling noises during wash or drain.
Foreign Object in Pump or Spray System
Symptom
Dishwasher powers on but will not start a cycle; Start button beeps or flashes and nothing happens.
Door Not Recognized as Closed / Start Inhibit
Symptom
Dishwasher runs for an unusually long time or seems stuck on one part of the cycle.
Extended Cycle Time / Heating or Sensor Issue
Symptom
Dishwasher stops mid-cycle and all lights turn off, then may resume later.
Intermittent Power Loss / Overheating Protection
Symptom
Dishwasher vibrates excessively or moves within the cabinet during operation.
Excessive Vibration / Installation Issue
Symptom
Dishwasher will not power on at all; no lights or display, completely dead.
No Power / Line Supply or Main Board Failure
Symptom
Glasses and dishes come out with a white film or cloudy residue.
Hard Water Deposits / Rinse Aid or Detergent Issue
Symptom
Upper rack dishes are not getting clean while lower rack is fine.
Upper Spray Arm / Feed Tube Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher will not start a cycle and displays E1 shortly after pressing Start.
|
Water Inlet Timeout / Insufficient Fill | View Details |
| E10 |
Dishwasher shows E10; cycle may not start and door may not lock properly.
|
Door Lock / Door Switch Error | View Details |
| E11 |
Dishwasher displays E11; keypad buttons may not respond or random selections occur.
|
Touch Control / Keypad Communication Error | View Details |
| E12 |
Dishwasher shows E12; water may be too hot or cycle ends quickly with steam and strong odor.
|
Overheating / Temperature Sensor High Reading | View Details |
| E13 |
Dishwasher displays E13; unit may fill and drain repeatedly without washing properly.
|
Overfill / Overflow Level Error | View Details |
| E14 |
Dishwasher shows E14; cycle may abort early and water level appears low.
|
Low Water Level / Underfill Error | View Details |
| E15 |
Dishwasher displays E15; unit may not start and base pan may be dry or slightly damp.
|
Base Leak Sensor / Float Switch Activated | View Details |
| E16 |
Dishwasher shows E16; water may continuously enter even when the unit is off, or cycle overfills.
|
Water Inlet Valve Stuck Open | View Details |
| E17 |
Dishwasher displays E17; circulation may be weak and spray arms may not rotate properly.
|
Spray Pressure / Circulation Performance Error | View Details |
| E18 |
Dishwasher shows E18; drain pump may run continuously even when tub is empty.
|
Drain System / Siphon or Sensor Error | View Details |
| E19 |
Dishwasher displays E19; diverter may not change spray zones and only one rack gets water.
|
Diverter Valve / Zone Wash Error | View Details |
| E2 |
Dishwasher stops mid-cycle and displays E2; water remains in the tub and does not drain.
|
Drain Timeout / Drain Pump Fault | View Details |
| E20 |
Dishwasher shows E20; fan may run loudly or not at all during drying, and there may be condensation on the door.
|
Ventilation / Condensation Fan Error | View Details |
| E3 |
Dishwasher displays E3 and stops; water inside is cold and dishes are not getting clean.
|
Heating Circuit Failure / Water Not Reaching Temperature | View Details |
| E4 |
Dishwasher shows E4 and stops; there is water in the base pan or evidence of a leak under the unit.
|
Leak Detected / Overflow Protection Activated | View Details |
| E5 |
Dishwasher displays E5 and will not start or complete a cycle; may stop shortly after filling.
|
Water Level Sensor / Pressure Switch Error | View Details |
| E6 |
Dishwasher shows E6 and stops; water may be present but spray arms are not turning and dishes remain dirty.
|
Circulation Pump / Wash Motor Failure | View Details |
| E7 |
Dishwasher displays E7; cycle may not start or may stop unexpectedly, often with no water entering.
|
Flow Meter / Water Intake Sensing Error | View Details |
| E8 |
Dishwasher shows E8 and may stop during the drying phase; dishes remain wet and cool.
|
Drying System / Fan or Heater Error | View Details |
| E9 |
Dishwasher displays E9 and will not start; control panel may be unresponsive or behave erratically.
|
Control Board / EEPROM or Software Error | View Details |
| – |
Detergent tablet or powder remains in the dispenser at the end of the cycle.
|
Detergent Dispenser Not Opening or Blocked | View Details |
| – |
Dishes are not getting clean; food remains on plates and glasses after a full cycle.
|
Poor Wash Performance / Inadequate Cleaning | View Details |
| – |
Dishes remain wet at the end of the cycle; poor drying performance.
|
Poor Drying / Vent or Rinse Aid Problem | View Details |
| – |
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom of the tub.
|
Poor Drainage / Standing Water | View Details |
| – |
Dishwasher door falls open quickly or does not stay in the desired position.
|
Door Spring / Hinge Cable Failure | View Details |
| – |
Dishwasher door is hard to close or rubs against the cabinet.
|
Cabinet Misalignment / Hinge Interference | View Details |
| – |
Dishwasher emits a burning smell or electrical odor during operation.
|
Overheating Component / Electrical Fault | View Details |
| – |
Dishwasher fills with water but does not wash; you hear only a faint hum or nothing at all, and spray arms do not move.
|
Wash Motor / Circulation Pump Not Running | View Details |
| – |
Dishwasher has a bad odor, musty or rotten smell inside the tub.
|
Odor / Bacterial Growth and Residue | View Details |
| – |
Dishwasher leaks from underneath the unit onto the floor or into the cabinet base.
|
Underbody Leak / Pump or Hose Failure | View Details |
| – |
Dishwasher leaks water from the bottom of the door during the wash cycle.
|
Door Seal / Splash Leak | View Details |
| – |
Dishwasher makes a high-pitched squealing or whining noise during operation.
|
Pump Bearing Wear / Motor Noise | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during wash or drain.
|
Foreign Object in Pump or Spray System | View Details |
| – |
Dishwasher powers on but will not start a cycle; Start button beeps or flashes and nothing happens.
|
Door Not Recognized as Closed / Start Inhibit | View Details |
| – |
Dishwasher runs for an unusually long time or seems stuck on one part of the cycle.
|
Extended Cycle Time / Heating or Sensor Issue | View Details |
| – |
Dishwasher stops mid-cycle and all lights turn off, then may resume later.
|
Intermittent Power Loss / Overheating Protection | View Details |
| – |
Dishwasher vibrates excessively or moves within the cabinet during operation.
|
Excessive Vibration / Installation Issue | View Details |
| – |
Dishwasher will not power on at all; no lights or display, completely dead.
|
No Power / Line Supply or Main Board Failure | View Details |
| – |
Glasses and dishes come out with a white film or cloudy residue.
|
Hard Water Deposits / Rinse Aid or Detergent Issue | View Details |
| – |
Upper rack dishes are not getting clean while lower rack is fine.
|
Upper Spray Arm / Feed Tube Issue | View Details |
No matching codes found
Advertisements