Pro Breeze
Pro Breeze Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Ice maker stops shortly after startup and displays E1 on the control panel.
Ambient Temperature Sensor Failure
E10
E10 error; unit stops and may beep continuously, often after several hours of operation.
Internal Overtemperature / Thermal Cutout Trip
E2
Ice maker beeps and shows E2; ice basket remains empty and cycle stops early.
Water Level Sensor / Float Switch Fault
E3
E3 error appears and ice cubes are very small, misshapen, or the cycle stops mid-freeze.
Evaporator Temperature Sensor / Ice Tray Sensor Fault
E4
E4 error displayed; ice shovel stops mid-cycle or cannot return to home position.
Ice Shovel / Ice Tray Motor Position Error
E5
E5 error appears; compressor does not start or stops quickly, and no ice is produced.
Compressor Overload / High Temperature Protection
E6
E6 error code; unit powers on but neither compressor nor fan starts, and no ice is made.
Main Control Board Failure
E7
E7 error displayed; ice bin is not full but the machine stops making ice.
Ice Full Sensor / Infrared Beam Fault
E8
E8 error appears; water pump runs loudly or not at all, and no water reaches the evaporator.
Circulation Water Pump Failure
E9
E9 error code; unit powers on but display flickers or buttons do not respond properly.
User Interface / Control Panel Communication Error
Symptom
Condenser fan does not spin, but compressor becomes very hot.
Condenser Fan Non-Operation
Symptom
Control panel display is dim or flickering, but the unit still runs.
Low Voltage to Display / Failing Display Board
Symptom
Display lights up but buttons do not respond or respond intermittently.
Unresponsive Keypad / Touch Controls
Symptom
Ice cubes are wet and soft when they drop into the basket.
Incomplete Freezing Cycle
Symptom
Ice has an unusual or bad taste or odor.
Contaminated Water Path / Odor Transfer
Symptom
Ice maker continues running even when the ice bin is full, causing overflow.
Ice Level Detection Failure – No Shutoff
Symptom
Ice maker does not power on at all (no lights, no sound).
No Power / Dead Appliance
Symptom
Ice maker forms ice on the evaporator but does not release cubes into the basket.
Ice Release / Harvest Failure
Symptom
Ice maker interior surfaces sweat heavily or show excessive condensation.
High Humidity Condensation
Symptom
Ice maker is very noisy during operation (grinding, rattling, or buzzing).
Excessive Operational Noise
Symptom
Ice maker leaks water onto the countertop or inside the cabinet.
External or Internal Water Leak
Symptom
Ice maker produces ice very slowly compared to normal.
Extended Freeze Time / Reduced Cooling Capacity
Symptom
Ice maker produces ice, but cubes are very small or hollow.
Insufficient Water Flow to Evaporator
Symptom
Ice maker runs briefly then shuts off with no error code.
Short Cycling / Premature Shutdown
Symptom
Ice maker runs but ice cubes are too large and stick together in the basket.
Overfreezing / Excessive Ice Size
Symptom
Ice maker runs but produces no ice at all.
No Ice Production – General Cooling Failure
Symptom
Ice maker stops making ice even though the bin is not full; restarting resumes production temporarily.
False Ice Bin Full Detection
Symptom
Ice maker trips the household circuit breaker or GFCI outlet.
Electrical Short or Ground Fault
Symptom
Ice maker vibrates excessively and moves on the countertop.
Excessive Vibration
Symptom
Loud knocking or banging noise when the ice shovel moves.
Ice Shovel Mechanical Interference
Symptom
Plastic smell from the unit during first uses or after storage.
New Appliance Odor / Off-Gassing
Symptom
Unit frequently freezes solid around the evaporator, requiring manual defrost.
Excessive Frost / Ice Buildup on Evaporator
Symptom
Visible white scale or mineral deposits on the evaporator and in the water tray.
Limescale Buildup in Water Circuit
Symptom
Water appears inside the ice storage bin under the ice, causing clumping.
Meltwater Drainage Problem
Symptom
Water pump is very loud or makes a grinding noise during operation.
Noisy Circulation Pump
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Ice maker stops shortly after startup and displays E1 on the control panel.
|
Ambient Temperature Sensor Failure | View Details |
| E10 |
E10 error; unit stops and may beep continuously, often after several hours of operation.
|
Internal Overtemperature / Thermal Cutout Trip | View Details |
| E2 |
Ice maker beeps and shows E2; ice basket remains empty and cycle stops early.
|
Water Level Sensor / Float Switch Fault | View Details |
| E3 |
E3 error appears and ice cubes are very small, misshapen, or the cycle stops mid-freeze.
|
Evaporator Temperature Sensor / Ice Tray Sensor Fault | View Details |
| E4 |
E4 error displayed; ice shovel stops mid-cycle or cannot return to home position.
|
Ice Shovel / Ice Tray Motor Position Error | View Details |
| E5 |
E5 error appears; compressor does not start or stops quickly, and no ice is produced.
|
Compressor Overload / High Temperature Protection | View Details |
| E6 |
E6 error code; unit powers on but neither compressor nor fan starts, and no ice is made.
|
Main Control Board Failure | View Details |
| E7 |
E7 error displayed; ice bin is not full but the machine stops making ice.
|
Ice Full Sensor / Infrared Beam Fault | View Details |
| E8 |
E8 error appears; water pump runs loudly or not at all, and no water reaches the evaporator.
|
Circulation Water Pump Failure | View Details |
| E9 |
E9 error code; unit powers on but display flickers or buttons do not respond properly.
|
User Interface / Control Panel Communication Error | View Details |
| – |
Condenser fan does not spin, but compressor becomes very hot.
|
Condenser Fan Non-Operation | View Details |
| – |
Control panel display is dim or flickering, but the unit still runs.
|
Low Voltage to Display / Failing Display Board | View Details |
| – |
Display lights up but buttons do not respond or respond intermittently.
|
Unresponsive Keypad / Touch Controls | View Details |
| – |
Ice cubes are wet and soft when they drop into the basket.
|
Incomplete Freezing Cycle | View Details |
| – |
Ice has an unusual or bad taste or odor.
|
Contaminated Water Path / Odor Transfer | View Details |
| – |
Ice maker continues running even when the ice bin is full, causing overflow.
|
Ice Level Detection Failure – No Shutoff | View Details |
| – |
Ice maker does not power on at all (no lights, no sound).
|
No Power / Dead Appliance | View Details |
| – |
Ice maker forms ice on the evaporator but does not release cubes into the basket.
|
Ice Release / Harvest Failure | View Details |
| – |
Ice maker interior surfaces sweat heavily or show excessive condensation.
|
High Humidity Condensation | View Details |
| – |
Ice maker is very noisy during operation (grinding, rattling, or buzzing).
|
Excessive Operational Noise | View Details |
| – |
Ice maker leaks water onto the countertop or inside the cabinet.
|
External or Internal Water Leak | View Details |
| – |
Ice maker produces ice very slowly compared to normal.
|
Extended Freeze Time / Reduced Cooling Capacity | View Details |
| – |
Ice maker produces ice, but cubes are very small or hollow.
|
Insufficient Water Flow to Evaporator | View Details |
| – |
Ice maker runs briefly then shuts off with no error code.
|
Short Cycling / Premature Shutdown | View Details |
| – |
Ice maker runs but ice cubes are too large and stick together in the basket.
|
Overfreezing / Excessive Ice Size | View Details |
| – |
Ice maker runs but produces no ice at all.
|
No Ice Production – General Cooling Failure | View Details |
| – |
Ice maker stops making ice even though the bin is not full; restarting resumes production temporarily.
|
False Ice Bin Full Detection | View Details |
| – |
Ice maker trips the household circuit breaker or GFCI outlet.
|
Electrical Short or Ground Fault | View Details |
| – |
Ice maker vibrates excessively and moves on the countertop.
|
Excessive Vibration | View Details |
| – |
Loud knocking or banging noise when the ice shovel moves.
|
Ice Shovel Mechanical Interference | View Details |
| – |
Plastic smell from the unit during first uses or after storage.
|
New Appliance Odor / Off-Gassing | View Details |
| – |
Unit frequently freezes solid around the evaporator, requiring manual defrost.
|
Excessive Frost / Ice Buildup on Evaporator | View Details |
| – |
Visible white scale or mineral deposits on the evaporator and in the water tray.
|
Limescale Buildup in Water Circuit | View Details |
| – |
Water appears inside the ice storage bin under the ice, causing clumping.
|
Meltwater Drainage Problem | View Details |
| – |
Water pump is very loud or makes a grinding noise during operation.
|
Noisy Circulation Pump | View Details |
No matching codes found
Advertisements