Kalamera
Kalamera Wine Coolers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
CF
Display shows CF and the compressor does not start or stops shortly after starting.
Compressor Fault or Compressor Fan Error
dE
Display shows dE and the door alarm sounds even when the door appears closed.
Door Switch or Door Sensor Error
E1
Wine cooler display shows E1 and cabinet is not cooling properly or temperature is unstable.
Cabinet Temperature Sensor (Thermistor) Failure
E2
Wine cooler shows E2 and the unit may overcool, undercool, or cycle erratically.
Evaporator Temperature Sensor Failure
E3
Display shows E3 and the wine cooler may not maintain the correct ambient compensation or may short-cycle.
Ambient Temperature Sensor Failure
E4
Wine cooler beeps and displays E4; unit may not defrost properly or may ice up around the evaporator.
Defrost Sensor or Defrost Circuit Failure
E5
Display shows E5 and compressor or fans may not run correctly; unit may shut down unexpectedly.
Main Control Board Fault or EEPROM Error
E6
Wine cooler displays E6 and the interior light or user interface may not respond correctly.
Communication Error Between Display Board and Main Control Board
E7
Dual-zone Kalamera wine cooler shows E7 and one or both zones do not maintain set temperature.
Upper or Lower Zone Temperature Sensor Failure (Dual-Zone Models)
F1
Display shows F1 and the touch controls may be unresponsive or erratic.
Front Panel Keypad / Touch Control Failure
FAN
Display shows FAN or fan icon flashes; interior temperature is uneven and unit may overheat.
Evaporator Fan Motor Failure
H1
Display shows H1 and the interior temperature reading is abnormally high; unit may not be cooling.
High Temperature Alarm / Over-Temperature Condition
Hi
Display shows Hi and the cooler will not allow setting a higher temperature or is in alarm.
High Temperature Alarm / Setpoint Limit Reached
L1
Display shows L1 and the interior temperature reading is abnormally low; bottles may be too cold.
Low Temperature Alarm / Overcooling Condition
Lo
Display shows Lo and the cooler will not allow setting a lower temperature or appears locked.
Temperature Setpoint Lockout / Child Lock Mode
Symptom
Condensation or frost forming on the interior walls or on bottles.
High Humidity or Air Infiltration
Symptom
Control panel buttons do not respond or respond intermittently.
Unresponsive Touch Controls
Symptom
Display is completely blank but the interior light may still work.
Display Power or UI Board Failure
Symptom
Display is lit but shows incorrect or fluctuating temperatures.
Inaccurate Temperature Sensing or Calibration
Symptom
Dual-zone wine cooler has one zone cooling properly while the other zone is warm.
Single-Zone Cooling Failure in Dual-Zone System
Symptom
Exterior of the wine cooler cabinet feels hot, especially around the door frame.
Condenser Heat Transfer and Poor Ventilation
Symptom
Frost or ice buildup on the back wall or around the evaporator.
Defrost System Inefficiency or Air Leak
Symptom
Glass door fogs up with condensation on the inside or outside.
Door Glass Condensation
Symptom
Musty or moldy smell inside the wine cooler.
Microbial Growth from Moisture and Spills
Symptom
Shelves or racks are difficult to slide or feel loose and unstable.
Shelf Track Wear or Misalignment
Symptom
Strong plastic or chemical odor inside the wine cooler, especially when new.
Off-Gassing from New Materials
Symptom
Water pooling at the bottom of the wine cooler or leaking onto the floor.
Condensate Drain Blockage or Excess Condensation
Symptom
Wine cooler beeps intermittently without any visible error code.
Door Ajar or Temperature Alarm Without Display Code
Symptom
Wine cooler cycles on and off frequently, with short run times.
Short Cycling / Control or Sensor Issue
Symptom
Wine cooler door does not close properly or pops open slightly after being shut.
Door Alignment or Gasket Deformation
Symptom
Wine cooler emits a high-pitched squealing or chirping noise from inside the cabinet.
Evaporator Fan Bearing Wear or Ice Contact
Symptom
Wine cooler interior light does not turn on when the door is opened, but cooling still works.
Interior LED Light Circuit Failure
Symptom
Wine cooler interior light stays on all the time, even when the door is closed.
Stuck Door Switch or Light Control Fault
Symptom
Wine cooler is too cold; bottles or beverages are freezing even at moderate setpoints.
Overcooling / Thermostat or Sensor Out of Calibration
Symptom
Wine cooler makes a gurgling or hissing sound periodically.
Normal Refrigerant Flow Noise
Symptom
Wine cooler makes loud rattling or buzzing noises during operation.
Excessive Vibration or Loose Components
Symptom
Wine cooler not cooling at all; interior stays at room temperature and compressor is silent.
No Cooling / Compressor Not Running
Symptom
Wine cooler runs but does not get cold enough; temperature stays well above the setpoint.
Insufficient Cooling / Partial Loss of Refrigeration
Symptom
Wine cooler runs continuously and rarely shuts off, even when set temperature appears reached.
Long Run Time / Inefficient Cooling
Symptom
Wine cooler trips the household circuit breaker when it starts.
Electrical Overload or Short Circuit
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| CF |
Display shows CF and the compressor does not start or stops shortly after starting.
|
Compressor Fault or Compressor Fan Error | View Details |
| dE |
Display shows dE and the door alarm sounds even when the door appears closed.
|
Door Switch or Door Sensor Error | View Details |
| E1 |
Wine cooler display shows E1 and cabinet is not cooling properly or temperature is unstable.
|
Cabinet Temperature Sensor (Thermistor) Failure | View Details |
| E2 |
Wine cooler shows E2 and the unit may overcool, undercool, or cycle erratically.
|
Evaporator Temperature Sensor Failure | View Details |
| E3 |
Display shows E3 and the wine cooler may not maintain the correct ambient compensation or may short-cycle.
|
Ambient Temperature Sensor Failure | View Details |
| E4 |
Wine cooler beeps and displays E4; unit may not defrost properly or may ice up around the evaporator.
|
Defrost Sensor or Defrost Circuit Failure | View Details |
| E5 |
Display shows E5 and compressor or fans may not run correctly; unit may shut down unexpectedly.
|
Main Control Board Fault or EEPROM Error | View Details |
| E6 |
Wine cooler displays E6 and the interior light or user interface may not respond correctly.
|
Communication Error Between Display Board and Main Control Board | View Details |
| E7 |
Dual-zone Kalamera wine cooler shows E7 and one or both zones do not maintain set temperature.
|
Upper or Lower Zone Temperature Sensor Failure (Dual-Zone Models) | View Details |
| F1 |
Display shows F1 and the touch controls may be unresponsive or erratic.
|
Front Panel Keypad / Touch Control Failure | View Details |
| FAN |
Display shows FAN or fan icon flashes; interior temperature is uneven and unit may overheat.
|
Evaporator Fan Motor Failure | View Details |
| H1 |
Display shows H1 and the interior temperature reading is abnormally high; unit may not be cooling.
|
High Temperature Alarm / Over-Temperature Condition | View Details |
| Hi |
Display shows Hi and the cooler will not allow setting a higher temperature or is in alarm.
|
High Temperature Alarm / Setpoint Limit Reached | View Details |
| L1 |
Display shows L1 and the interior temperature reading is abnormally low; bottles may be too cold.
|
Low Temperature Alarm / Overcooling Condition | View Details |
| Lo |
Display shows Lo and the cooler will not allow setting a lower temperature or appears locked.
|
Temperature Setpoint Lockout / Child Lock Mode | View Details |
| – |
Condensation or frost forming on the interior walls or on bottles.
|
High Humidity or Air Infiltration | View Details |
| – |
Control panel buttons do not respond or respond intermittently.
|
Unresponsive Touch Controls | View Details |
| – |
Display is completely blank but the interior light may still work.
|
Display Power or UI Board Failure | View Details |
| – |
Display is lit but shows incorrect or fluctuating temperatures.
|
Inaccurate Temperature Sensing or Calibration | View Details |
| – |
Dual-zone wine cooler has one zone cooling properly while the other zone is warm.
|
Single-Zone Cooling Failure in Dual-Zone System | View Details |
| – |
Exterior of the wine cooler cabinet feels hot, especially around the door frame.
|
Condenser Heat Transfer and Poor Ventilation | View Details |
| – |
Frost or ice buildup on the back wall or around the evaporator.
|
Defrost System Inefficiency or Air Leak | View Details |
| – |
Glass door fogs up with condensation on the inside or outside.
|
Door Glass Condensation | View Details |
| – |
Musty or moldy smell inside the wine cooler.
|
Microbial Growth from Moisture and Spills | View Details |
| – |
Shelves or racks are difficult to slide or feel loose and unstable.
|
Shelf Track Wear or Misalignment | View Details |
| – |
Strong plastic or chemical odor inside the wine cooler, especially when new.
|
Off-Gassing from New Materials | View Details |
| – |
Water pooling at the bottom of the wine cooler or leaking onto the floor.
|
Condensate Drain Blockage or Excess Condensation | View Details |
| – |
Wine cooler beeps intermittently without any visible error code.
|
Door Ajar or Temperature Alarm Without Display Code | View Details |
| – |
Wine cooler cycles on and off frequently, with short run times.
|
Short Cycling / Control or Sensor Issue | View Details |
| – |
Wine cooler door does not close properly or pops open slightly after being shut.
|
Door Alignment or Gasket Deformation | View Details |
| – |
Wine cooler emits a high-pitched squealing or chirping noise from inside the cabinet.
|
Evaporator Fan Bearing Wear or Ice Contact | View Details |
| – |
Wine cooler interior light does not turn on when the door is opened, but cooling still works.
|
Interior LED Light Circuit Failure | View Details |
| – |
Wine cooler interior light stays on all the time, even when the door is closed.
|
Stuck Door Switch or Light Control Fault | View Details |
| – |
Wine cooler is too cold; bottles or beverages are freezing even at moderate setpoints.
|
Overcooling / Thermostat or Sensor Out of Calibration | View Details |
| – |
Wine cooler makes a gurgling or hissing sound periodically.
|
Normal Refrigerant Flow Noise | View Details |
| – |
Wine cooler makes loud rattling or buzzing noises during operation.
|
Excessive Vibration or Loose Components | View Details |
| – |
Wine cooler not cooling at all; interior stays at room temperature and compressor is silent.
|
No Cooling / Compressor Not Running | View Details |
| – |
Wine cooler runs but does not get cold enough; temperature stays well above the setpoint.
|
Insufficient Cooling / Partial Loss of Refrigeration | View Details |
| – |
Wine cooler runs continuously and rarely shuts off, even when set temperature appears reached.
|
Long Run Time / Inefficient Cooling | View Details |
| – |
Wine cooler trips the household circuit breaker when it starts.
|
Electrical Overload or Short Circuit | View Details |
No matching codes found
Advertisements