Teka Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher will not fill with water; cycle starts then stops with E1 on display and audible beeps.
Water Inlet Timeout / No Fill
E10
Dishwasher shows E10 and may not start or may stop shortly after starting.
Communication Error Between Control Boards
E11
Dishwasher displays E11; often related to turbidity or water quality sensing.
Turbidity Sensor / Optical Sensor Error
E12
Dishwasher shows E12; may be associated with drying problems or fan operation.
Drying Fan / Condenser System Fault
E13
Dishwasher displays E13; may be linked to unusually high inlet water temperature.
Inlet Water Over-Temperature Error
E15
Dishwasher shows E15 and will not start; you may hear the drain pump running continuously.
Anti-Flood System Activated (Water in Base Tray)
E2
Dishwasher stops mid-cycle and displays E2; water remains in the tub and does not drain.
Drain Pump Failure / Drain Timeout
E20
Dishwasher displays E20; may not start or may stop unexpectedly.
Door Lock / Door Switch Error
E21
Dishwasher shows E21; circulation pump may not run or may be noisy.
Circulation Pump Motor Error
E22
Dishwasher displays E22; often appears at the end of cycle with standing dirty water or poor cleaning.
Filter / Sump Blockage Detected
E24
Dishwasher shows E24; water may not drain and there may be gurgling noises from the sink.
Drain Hose / Outlet Blockage
E25
Dishwasher displays E25; water remains in the bottom and a humming noise may be heard from the drain pump.
Drain Pump Blocked / Pump Cover Obstruction
E3
Dishwasher displays E3 and stops; water is present but does not heat, and dishes come out cold and wet.
Heating Circuit Failure
E30
Dishwasher shows E30 and will not start; often accompanied by continuous draining.
General Leak / Anti-Flood Alarm
E31
Dishwasher displays E31; may be related to softener or water hardness control.
Water Softener / Regeneration Valve Error
E4
Dishwasher shows E4 and stops; water level appears too high or unit may attempt to drain continuously.
Overfill / Water Level Error
E40
Dishwasher shows E40; may not start and may indicate a configuration or sensor mismatch.
Configuration / Sensor Calibration Error
E5
Dishwasher displays E5 shortly after starting; machine may stop during filling or rinsing phase.
Water Level Sensor / Pressure Switch Fault
E6
Dishwasher shows E6; cycle may stop early and water may not heat correctly.
NTC Temperature Sensor Error
E7
Dishwasher displays E7 and may not complete the wash; sometimes associated with incorrect water level or heating behavior.
Flow Meter / Water Intake Measurement Error
E8
Dishwasher shows E8; water level appears low and spray arms may not rotate properly.
Insufficient Water Level / Circulation Error
E9
Dishwasher displays E9; often associated with heating issues or water leakage into the base.
Heater / Heat Pump Assembly Fault
Symptom
Detergent tablet or powder remains in the dispenser at the end of the cycle.
Detergent Dispenser Not Opening / Poor Water Reach
Symptom
Dishes come out wet and not properly dried at the end of the cycle.
Poor Drying Performance
Symptom
Dishwasher does not power on at all; no lights or display, no response to buttons.
No Power / Dead Appliance
Symptom
Dishwasher door drops down quickly or will not stay in intermediate positions.
Door Spring / Hinge Cable Failure
Symptom
Dishwasher fills and drains but spray arms do not rotate; dishes remain dirty.
Circulation Failure / Low Spray Pressure
Symptom
Dishwasher intermittently stops mid-cycle without any error code; may resume if door is opened and closed.
Intermittent Door Switch / Overheating Control Board
Symptom
Dishwasher leaks water from the bottom front of the door during operation.
Door Seal / Door Alignment Leak
Symptom
Dishwasher leaks water from underneath the cabinet; puddle appears on the floor near the sides or back.
Internal Hose / Pump / Tub Leak
Symptom
Dishwasher makes loud grinding or rattling noises during wash or drain.
Foreign Object in Pump or Spray System
Symptom
Dishwasher powers on but will not start cycle; Start button unresponsive or program will not latch.
User Interface / Control Panel Fault
Symptom
Dishwasher runs but dishes are not cleaned properly; food residues remain and glasses are cloudy.
Poor Wash Performance
Symptom
Dishwasher vibrates excessively or moves during operation.
Excessive Vibration / Installation Issue
Symptom
Rust spots appearing on cutlery or inside the dishwasher tub.
Corrosion / Rust Contamination
Symptom
Unpleasant smell coming from the dishwasher, especially when opening the door after some time.
Odor / Biofilm Buildup
Symptom
Upper rack dishes remain dirty while lower rack is mostly clean.
Upper Spray Arm / Feed Tube Issue
Symptom
Water remains in the bottom of the dishwasher after cycle, but no error code is shown.
Partial Drain / Residual Water
Symptom
White film or limescale deposits on dishes and inside the tub.
Limescale / Hard Water Deposits
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher will not fill with water; cycle starts then stops with E1 on display and audible beeps.
|
Water Inlet Timeout / No Fill | View Details |
| E10 |
Dishwasher shows E10 and may not start or may stop shortly after starting.
|
Communication Error Between Control Boards | View Details |
| E11 |
Dishwasher displays E11; often related to turbidity or water quality sensing.
|
Turbidity Sensor / Optical Sensor Error | View Details |
| E12 |
Dishwasher shows E12; may be associated with drying problems or fan operation.
|
Drying Fan / Condenser System Fault | View Details |
| E13 |
Dishwasher displays E13; may be linked to unusually high inlet water temperature.
|
Inlet Water Over-Temperature Error | View Details |
| E15 |
Dishwasher shows E15 and will not start; you may hear the drain pump running continuously.
|
Anti-Flood System Activated (Water in Base Tray) | View Details |
| E2 |
Dishwasher stops mid-cycle and displays E2; water remains in the tub and does not drain.
|
Drain Pump Failure / Drain Timeout | View Details |
| E20 |
Dishwasher displays E20; may not start or may stop unexpectedly.
|
Door Lock / Door Switch Error | View Details |
| E21 |
Dishwasher shows E21; circulation pump may not run or may be noisy.
|
Circulation Pump Motor Error | View Details |
| E22 |
Dishwasher displays E22; often appears at the end of cycle with standing dirty water or poor cleaning.
|
Filter / Sump Blockage Detected | View Details |
| E24 |
Dishwasher shows E24; water may not drain and there may be gurgling noises from the sink.
|
Drain Hose / Outlet Blockage | View Details |
| E25 |
Dishwasher displays E25; water remains in the bottom and a humming noise may be heard from the drain pump.
|
Drain Pump Blocked / Pump Cover Obstruction | View Details |
| E3 |
Dishwasher displays E3 and stops; water is present but does not heat, and dishes come out cold and wet.
|
Heating Circuit Failure | View Details |
| E30 |
Dishwasher shows E30 and will not start; often accompanied by continuous draining.
|
General Leak / Anti-Flood Alarm | View Details |
| E31 |
Dishwasher displays E31; may be related to softener or water hardness control.
|
Water Softener / Regeneration Valve Error | View Details |
| E4 |
Dishwasher shows E4 and stops; water level appears too high or unit may attempt to drain continuously.
|
Overfill / Water Level Error | View Details |
| E40 |
Dishwasher shows E40; may not start and may indicate a configuration or sensor mismatch.
|
Configuration / Sensor Calibration Error | View Details |
| E5 |
Dishwasher displays E5 shortly after starting; machine may stop during filling or rinsing phase.
|
Water Level Sensor / Pressure Switch Fault | View Details |
| E6 |
Dishwasher shows E6; cycle may stop early and water may not heat correctly.
|
NTC Temperature Sensor Error | View Details |
| E7 |
Dishwasher displays E7 and may not complete the wash; sometimes associated with incorrect water level or heating behavior.
|
Flow Meter / Water Intake Measurement Error | View Details |
| E8 |
Dishwasher shows E8; water level appears low and spray arms may not rotate properly.
|
Insufficient Water Level / Circulation Error | View Details |
| E9 |
Dishwasher displays E9; often associated with heating issues or water leakage into the base.
|
Heater / Heat Pump Assembly Fault | View Details |
| – |
Detergent tablet or powder remains in the dispenser at the end of the cycle.
|
Detergent Dispenser Not Opening / Poor Water Reach | View Details |
| – |
Dishes come out wet and not properly dried at the end of the cycle.
|
Poor Drying Performance | View Details |
| – |
Dishwasher does not power on at all; no lights or display, no response to buttons.
|
No Power / Dead Appliance | View Details |
| – |
Dishwasher door drops down quickly or will not stay in intermediate positions.
|
Door Spring / Hinge Cable Failure | View Details |
| – |
Dishwasher fills and drains but spray arms do not rotate; dishes remain dirty.
|
Circulation Failure / Low Spray Pressure | View Details |
| – |
Dishwasher intermittently stops mid-cycle without any error code; may resume if door is opened and closed.
|
Intermittent Door Switch / Overheating Control Board | View Details |
| – |
Dishwasher leaks water from the bottom front of the door during operation.
|
Door Seal / Door Alignment Leak | View Details |
| – |
Dishwasher leaks water from underneath the cabinet; puddle appears on the floor near the sides or back.
|
Internal Hose / Pump / Tub Leak | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during wash or drain.
|
Foreign Object in Pump or Spray System | View Details |
| – |
Dishwasher powers on but will not start cycle; Start button unresponsive or program will not latch.
|
User Interface / Control Panel Fault | View Details |
| – |
Dishwasher runs but dishes are not cleaned properly; food residues remain and glasses are cloudy.
|
Poor Wash Performance | View Details |
| – |
Dishwasher vibrates excessively or moves during operation.
|
Excessive Vibration / Installation Issue | View Details |
| – |
Rust spots appearing on cutlery or inside the dishwasher tub.
|
Corrosion / Rust Contamination | View Details |
| – |
Unpleasant smell coming from the dishwasher, especially when opening the door after some time.
|
Odor / Biofilm Buildup | View Details |
| – |
Upper rack dishes remain dirty while lower rack is mostly clean.
|
Upper Spray Arm / Feed Tube Issue | View Details |
| – |
Water remains in the bottom of the dishwasher after cycle, but no error code is shown.
|
Partial Drain / Residual Water | View Details |
| – |
White film or limescale deposits on dishes and inside the tub.
|
Limescale / Hard Water Deposits | View Details |
No matching codes found
Advertisements