Asko Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F1
Oven will not heat, display shows F1 shortly after a cooking program is started.
Cavity Temperature Sensor Failure
F10
Oven display shows F10, oven may not start or may shut down unexpectedly, sometimes after a power outage.
Configuration / EEPROM Error
F11
Oven display shows F11, often accompanied by no heat from one of the elements (bake or grill).
Heating Element Circuit Fault
F12
Oven display shows F12, oven lights and fan may work but heating is disabled.
Power Supply / Low Voltage Error
F13
Oven display shows F13, often related to pyrolytic self-clean cycle not starting or aborting.
Pyrolytic Temperature or Safety Circuit Fault
F14
Oven display shows F14, touch display may be blank or frozen.
Display Module / UI Power Fault
F15
Oven display shows F15, often when using the grill or broil function.
Grill / Broil Element Overtemperature or Circuit Fault
F2
Oven overheats, may shut off mid-cycle, display shows F2 or F2 followed by a beep.
Overtemperature Fault / Sensor Out of Range
F20
Oven display shows F20, oven may not start and internal fan may run unexpectedly.
Overheat Protection / Ambient Temperature Fault
F3
Oven does not reach set temperature, display shows F3 during preheat or shortly after starting.
Temperature Sensor Circuit Open
F30
Oven display shows F30, often associated with steam or combination ovens where humidity is used.
Steam / Humidity Sensor Fault
F4
Oven display shows F4, oven may shut down or refuse to start a heating cycle.
Temperature Sensor Short Circuit
F40
Oven display shows F40, oven may not recognize door position correctly.
Door Switch / Door Position Detection Fault
F5
Oven display shows F5 and beeps, oven may not start or may stop mid-cycle.
Control Panel Keypad / Touch Interface Fault
F50
Oven display shows F50, often when using special functions like fan-assisted or convection modes.
Convection Fan Motor Fault
F6
Oven display shows F6, oven may not respond to commands or may shut off unexpectedly.
Communication Error Between User Interface and Main Control
F60
Oven display shows F60, oven may not start and internal electronics may be unresponsive.
Internal Electronics Overheat / Heat Sink Temperature Fault
F7
Oven display shows F7, often associated with erratic temperature control or failure to heat properly.
Relay or Power Stage Failure on Main Control Board
F8
Oven display shows F8, fan may not run or oven may overheat around the control panel.
Cooling Fan Circuit Fault
F9
Oven display shows F9, oven door may not lock or unlock during pyrolytic self-clean (if equipped).
Door Lock Mechanism Fault
Symptom
Convection fan does not run in fan-assisted modes; food cooks unevenly.
Convection Fan Inoperative
Symptom
Oven clock and timer lose settings or reset randomly.
Power Interruption or Control Memory Issue
Symptom
Oven display is completely dead; no lights, no response to buttons.
No Power to Control
Symptom
Oven display works but buttons or touch controls do not respond or respond intermittently.
Unresponsive Touch Panel / Keypad
Symptom
Oven does not heat at all; display and lights work but no warmth in any mode.
No-Heat Condition
Symptom
Oven door will not close fully or pops open slightly during operation.
Door Hinge / Latch Misalignment
Symptom
Oven door will not open after a self-clean cycle has finished and the oven has cooled.
Door Lock Stuck Closed
Symptom
Oven emits a strong burning smell or smoke during normal cooking (not first use or self-clean).
Burning Residue or Electrical Overheating
Symptom
Oven fan (convection or cooling) runs continuously even when the oven is off and cool.
Fan Stuck On
Symptom
Oven glass door becomes excessively hot to the touch during normal baking.
Door Insulation / Cooling System Inefficiency
Symptom
Oven heats but does not reach the set temperature or takes excessively long to preheat.
Underheating / Long Preheat
Symptom
Oven interior enamel is chipped or rusting, exposing metal underneath.
Cavity Coating Damage
Symptom
Oven interior light stays on all the time, even when the door is closed and oven is off.
Stuck Lamp Circuit
Symptom
Oven interior surfaces remain dirty even after running a full pyrolytic self-clean cycle.
Ineffective Self-Clean
Symptom
Oven leaks water or condensation from the door or bottom, especially on combi-steam models.
Water / Condensation Leak
Symptom
Oven light does not work, but heating and other functions are normal.
Cavity Lamp Failure
Symptom
Oven overheats, burning food even at low temperature settings.
Overheating / Temperature Overshoot
Symptom
Oven produces excessive noise during operation (rattling, grinding, or squealing).
Mechanical Noise from Fan or Loose Components
Symptom
Oven trips the household circuit breaker or RCD when heating is started.
Electrical Short or Ground Fault
Symptom
Pyrolytic self-clean cycle does not start; oven beeps and returns to normal mode.
Self-Clean Not Initiating
Symptom
Steam or combi Asko oven does not produce steam; water tank empties slowly or not at all.
No Steam Generation
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F1 |
Oven will not heat, display shows F1 shortly after a cooking program is started.
|
Cavity Temperature Sensor Failure | View Details |
| F10 |
Oven display shows F10, oven may not start or may shut down unexpectedly, sometimes after a power outage.
|
Configuration / EEPROM Error | View Details |
| F11 |
Oven display shows F11, often accompanied by no heat from one of the elements (bake or grill).
|
Heating Element Circuit Fault | View Details |
| F12 |
Oven display shows F12, oven lights and fan may work but heating is disabled.
|
Power Supply / Low Voltage Error | View Details |
| F13 |
Oven display shows F13, often related to pyrolytic self-clean cycle not starting or aborting.
|
Pyrolytic Temperature or Safety Circuit Fault | View Details |
| F14 |
Oven display shows F14, touch display may be blank or frozen.
|
Display Module / UI Power Fault | View Details |
| F15 |
Oven display shows F15, often when using the grill or broil function.
|
Grill / Broil Element Overtemperature or Circuit Fault | View Details |
| F2 |
Oven overheats, may shut off mid-cycle, display shows F2 or F2 followed by a beep.
|
Overtemperature Fault / Sensor Out of Range | View Details |
| F20 |
Oven display shows F20, oven may not start and internal fan may run unexpectedly.
|
Overheat Protection / Ambient Temperature Fault | View Details |
| F3 |
Oven does not reach set temperature, display shows F3 during preheat or shortly after starting.
|
Temperature Sensor Circuit Open | View Details |
| F30 |
Oven display shows F30, often associated with steam or combination ovens where humidity is used.
|
Steam / Humidity Sensor Fault | View Details |
| F4 |
Oven display shows F4, oven may shut down or refuse to start a heating cycle.
|
Temperature Sensor Short Circuit | View Details |
| F40 |
Oven display shows F40, oven may not recognize door position correctly.
|
Door Switch / Door Position Detection Fault | View Details |
| F5 |
Oven display shows F5 and beeps, oven may not start or may stop mid-cycle.
|
Control Panel Keypad / Touch Interface Fault | View Details |
| F50 |
Oven display shows F50, often when using special functions like fan-assisted or convection modes.
|
Convection Fan Motor Fault | View Details |
| F6 |
Oven display shows F6, oven may not respond to commands or may shut off unexpectedly.
|
Communication Error Between User Interface and Main Control | View Details |
| F60 |
Oven display shows F60, oven may not start and internal electronics may be unresponsive.
|
Internal Electronics Overheat / Heat Sink Temperature Fault | View Details |
| F7 |
Oven display shows F7, often associated with erratic temperature control or failure to heat properly.
|
Relay or Power Stage Failure on Main Control Board | View Details |
| F8 |
Oven display shows F8, fan may not run or oven may overheat around the control panel.
|
Cooling Fan Circuit Fault | View Details |
| F9 |
Oven display shows F9, oven door may not lock or unlock during pyrolytic self-clean (if equipped).
|
Door Lock Mechanism Fault | View Details |
| – |
Convection fan does not run in fan-assisted modes; food cooks unevenly.
|
Convection Fan Inoperative | View Details |
| – |
Oven clock and timer lose settings or reset randomly.
|
Power Interruption or Control Memory Issue | View Details |
| – |
Oven display is completely dead; no lights, no response to buttons.
|
No Power to Control | View Details |
| – |
Oven display works but buttons or touch controls do not respond or respond intermittently.
|
Unresponsive Touch Panel / Keypad | View Details |
| – |
Oven does not heat at all; display and lights work but no warmth in any mode.
|
No-Heat Condition | View Details |
| – |
Oven door will not close fully or pops open slightly during operation.
|
Door Hinge / Latch Misalignment | View Details |
| – |
Oven door will not open after a self-clean cycle has finished and the oven has cooled.
|
Door Lock Stuck Closed | View Details |
| – |
Oven emits a strong burning smell or smoke during normal cooking (not first use or self-clean).
|
Burning Residue or Electrical Overheating | View Details |
| – |
Oven fan (convection or cooling) runs continuously even when the oven is off and cool.
|
Fan Stuck On | View Details |
| – |
Oven glass door becomes excessively hot to the touch during normal baking.
|
Door Insulation / Cooling System Inefficiency | View Details |
| – |
Oven heats but does not reach the set temperature or takes excessively long to preheat.
|
Underheating / Long Preheat | View Details |
| – |
Oven interior enamel is chipped or rusting, exposing metal underneath.
|
Cavity Coating Damage | View Details |
| – |
Oven interior light stays on all the time, even when the door is closed and oven is off.
|
Stuck Lamp Circuit | View Details |
| – |
Oven interior surfaces remain dirty even after running a full pyrolytic self-clean cycle.
|
Ineffective Self-Clean | View Details |
| – |
Oven leaks water or condensation from the door or bottom, especially on combi-steam models.
|
Water / Condensation Leak | View Details |
| – |
Oven light does not work, but heating and other functions are normal.
|
Cavity Lamp Failure | View Details |
| – |
Oven overheats, burning food even at low temperature settings.
|
Overheating / Temperature Overshoot | View Details |
| – |
Oven produces excessive noise during operation (rattling, grinding, or squealing).
|
Mechanical Noise from Fan or Loose Components | View Details |
| – |
Oven trips the household circuit breaker or RCD when heating is started.
|
Electrical Short or Ground Fault | View Details |
| – |
Pyrolytic self-clean cycle does not start; oven beeps and returns to normal mode.
|
Self-Clean Not Initiating | View Details |
| – |
Steam or combi Asko oven does not produce steam; water tank empties slowly or not at all.
|
No Steam Generation | View Details |
No matching codes found
Advertisements