Teka Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Oven does not heat; display is on, fan may run, but temperature never rises and E01 appears on the display.
Main Temperature Sensor (NTC) Failure
E02
Oven overheats rapidly, may burn food, or shuts down with E02 displayed; cooling fan may run continuously.
Overtemperature Protection / Sensor Out of Range
E03
Oven does not heat and E03 appears shortly after starting a cooking program.
Upper Heating Element Circuit Fault
E04
Oven does not heat properly in conventional or fan modes; E04 is displayed after a short attempt to heat.
Lower Heating Element Circuit Fault
E05
Fan-assisted modes do not heat correctly; E05 appears and the oven may only get lukewarm.
Circular (Fan) Heating Element Circuit Fault
E06
Cooling fan does not run or runs erratically; oven may shut down with E06 after some minutes of operation.
Cooling Fan Motor or Feedback Fault
E07
Oven display and lights work but none of the heating functions start; E07 is shown shortly after selecting a program.
Power Relay / Power Supply Fault on Control Board
E08
Oven door will not lock for pyrolytic self-cleaning; E08 appears and the cycle is aborted.
Door Lock Mechanism / Lock Motor Fault
E09
Oven door remains locked after pyrolytic cycle or power cut; E09 is displayed and the door cannot be opened normally.
Door Lock Feedback / Stuck Lock
E10
Display shows E10 and the oven will not start; often associated with a detected mains voltage problem.
Mains Voltage Out of Range / Power Supply Error
E11
Touch control panel is unresponsive or partially responsive; E11 may appear intermittently.
Touch Control Interface / Keypad Fault
E12
Oven clock and timer functions behave erratically; programs cannot be set correctly and E12 is displayed.
Timer / Clock Circuit Error
E13
Oven interior light does not work and E13 may appear when trying to activate the light function.
Oven Lamp Circuit Fault
E14
Oven fan runs but there is no heat in any mode; E14 is displayed indicating a safety thermostat issue.
Safety Thermostat (Thermal Cut-Out) Tripped or Faulty
E15
Oven displays E15 and will not start; often associated with internal communication problems between boards.
Communication Error Between Main PCB and User Interface
E16
Steam-assisted or hydroclean function fails to start; E16 is displayed on models with steam features.
Steam Generator / Water System Fault
E17
Pyrolytic self-cleaning cycle does not start or aborts early with E17 displayed.
Pyrolytic Temperature Control Fault
E18
Display shows E18 and the oven may shut down unexpectedly during operation.
Internal Overheating / Cavity Overtemperature
E19
Oven beeps and shows E19; some functions may be disabled, often related to child lock or safety interlock issues.
Child Lock / Safety Interlock Error
E20
Oven display is blank or flickers; E20 may appear briefly when power is restored.
Display Power / Backlight Fault
Symptom
Buttons or touch keys on the control panel respond intermittently or activate by themselves.
Contaminated or Failing Touch Panel
Symptom
Grill function does not work; other heating modes operate normally.
Grill / Upper Element Failure
Symptom
Oven display and controls reset or flicker when the oven heats up.
Thermal Stress on Control Electronics
Symptom
Oven does not heat at all in any mode; fan and light may work but food remains cold.
Global Heating Failure
Symptom
Oven door does not close fully; heat escapes and cooking is uneven.
Door Hinge / Door Seal Misalignment
Symptom
Oven door glass is loose, rattles, or has condensation between the panes.
Door Glass Assembly / Inner Seal Failure
Symptom
Oven emits a burning smell or smoke during normal cooking (not during first use or pyrolysis).
Residue Burning / Component Overheating
Symptom
Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.
Fan Element Failure
Symptom
Oven heats but does not reach the set temperature; food takes much longer to cook than expected.
Underheating / Temperature Regulation Error
Symptom
Oven interior light does not turn on, but heating and fan work normally.
Lamp Failure
Symptom
Oven light works but fan and heating do not start when a function is selected.
Function Selector / Mode Switch Fault (for knob-based models)
Symptom
Oven makes loud rattling or scraping noises when the fan is running.
Fan Motor / Fan Blade Obstruction
Symptom
Oven overheats and burns food even at low temperature settings.
Thermostat Stuck On / Sensor Misreading High
Symptom
Oven produces excessive condensation on the door and surrounding cabinetry during cooking.
Ventilation / Door Seal Issue
Symptom
Oven trips the household circuit breaker or RCD when turned on or when a specific function is selected.
Electrical Short or Earth Leakage
Symptom
Oven will not start; display shows that the door is open even when it is closed (no specific error code).
Door Switch / Latch Sensor Mis-detection
Symptom
Pyrolytic self-cleaning does not start; oven indicates that accessories or trays are still inside even when removed.
Accessory Detection / Safety Logic Fault
Symptom
Strong electrical or plastic smell when the oven is used, even after several uses.
Overheating of Electrical Components or Insulation
Symptom
Timer or clock does not keep correct time or loses settings when power is briefly interrupted.
Clock / Memory Backup Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Oven does not heat; display is on, fan may run, but temperature never rises and E01 appears on the display.
|
Main Temperature Sensor (NTC) Failure | View Details |
| E02 |
Oven overheats rapidly, may burn food, or shuts down with E02 displayed; cooling fan may run continuously.
|
Overtemperature Protection / Sensor Out of Range | View Details |
| E03 |
Oven does not heat and E03 appears shortly after starting a cooking program.
|
Upper Heating Element Circuit Fault | View Details |
| E04 |
Oven does not heat properly in conventional or fan modes; E04 is displayed after a short attempt to heat.
|
Lower Heating Element Circuit Fault | View Details |
| E05 |
Fan-assisted modes do not heat correctly; E05 appears and the oven may only get lukewarm.
|
Circular (Fan) Heating Element Circuit Fault | View Details |
| E06 |
Cooling fan does not run or runs erratically; oven may shut down with E06 after some minutes of operation.
|
Cooling Fan Motor or Feedback Fault | View Details |
| E07 |
Oven display and lights work but none of the heating functions start; E07 is shown shortly after selecting a program.
|
Power Relay / Power Supply Fault on Control Board | View Details |
| E08 |
Oven door will not lock for pyrolytic self-cleaning; E08 appears and the cycle is aborted.
|
Door Lock Mechanism / Lock Motor Fault | View Details |
| E09 |
Oven door remains locked after pyrolytic cycle or power cut; E09 is displayed and the door cannot be opened normally.
|
Door Lock Feedback / Stuck Lock | View Details |
| E10 |
Display shows E10 and the oven will not start; often associated with a detected mains voltage problem.
|
Mains Voltage Out of Range / Power Supply Error | View Details |
| E11 |
Touch control panel is unresponsive or partially responsive; E11 may appear intermittently.
|
Touch Control Interface / Keypad Fault | View Details |
| E12 |
Oven clock and timer functions behave erratically; programs cannot be set correctly and E12 is displayed.
|
Timer / Clock Circuit Error | View Details |
| E13 |
Oven interior light does not work and E13 may appear when trying to activate the light function.
|
Oven Lamp Circuit Fault | View Details |
| E14 |
Oven fan runs but there is no heat in any mode; E14 is displayed indicating a safety thermostat issue.
|
Safety Thermostat (Thermal Cut-Out) Tripped or Faulty | View Details |
| E15 |
Oven displays E15 and will not start; often associated with internal communication problems between boards.
|
Communication Error Between Main PCB and User Interface | View Details |
| E16 |
Steam-assisted or hydroclean function fails to start; E16 is displayed on models with steam features.
|
Steam Generator / Water System Fault | View Details |
| E17 |
Pyrolytic self-cleaning cycle does not start or aborts early with E17 displayed.
|
Pyrolytic Temperature Control Fault | View Details |
| E18 |
Display shows E18 and the oven may shut down unexpectedly during operation.
|
Internal Overheating / Cavity Overtemperature | View Details |
| E19 |
Oven beeps and shows E19; some functions may be disabled, often related to child lock or safety interlock issues.
|
Child Lock / Safety Interlock Error | View Details |
| E20 |
Oven display is blank or flickers; E20 may appear briefly when power is restored.
|
Display Power / Backlight Fault | View Details |
| – |
Buttons or touch keys on the control panel respond intermittently or activate by themselves.
|
Contaminated or Failing Touch Panel | View Details |
| – |
Grill function does not work; other heating modes operate normally.
|
Grill / Upper Element Failure | View Details |
| – |
Oven display and controls reset or flicker when the oven heats up.
|
Thermal Stress on Control Electronics | View Details |
| – |
Oven does not heat at all in any mode; fan and light may work but food remains cold.
|
Global Heating Failure | View Details |
| – |
Oven door does not close fully; heat escapes and cooking is uneven.
|
Door Hinge / Door Seal Misalignment | View Details |
| – |
Oven door glass is loose, rattles, or has condensation between the panes.
|
Door Glass Assembly / Inner Seal Failure | View Details |
| – |
Oven emits a burning smell or smoke during normal cooking (not during first use or pyrolysis).
|
Residue Burning / Component Overheating | View Details |
| – |
Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.
|
Fan Element Failure | View Details |
| – |
Oven heats but does not reach the set temperature; food takes much longer to cook than expected.
|
Underheating / Temperature Regulation Error | View Details |
| – |
Oven interior light does not turn on, but heating and fan work normally.
|
Lamp Failure | View Details |
| – |
Oven light works but fan and heating do not start when a function is selected.
|
Function Selector / Mode Switch Fault (for knob-based models) | View Details |
| – |
Oven makes loud rattling or scraping noises when the fan is running.
|
Fan Motor / Fan Blade Obstruction | View Details |
| – |
Oven overheats and burns food even at low temperature settings.
|
Thermostat Stuck On / Sensor Misreading High | View Details |
| – |
Oven produces excessive condensation on the door and surrounding cabinetry during cooking.
|
Ventilation / Door Seal Issue | View Details |
| – |
Oven trips the household circuit breaker or RCD when turned on or when a specific function is selected.
|
Electrical Short or Earth Leakage | View Details |
| – |
Oven will not start; display shows that the door is open even when it is closed (no specific error code).
|
Door Switch / Latch Sensor Mis-detection | View Details |
| – |
Pyrolytic self-cleaning does not start; oven indicates that accessories or trays are still inside even when removed.
|
Accessory Detection / Safety Logic Fault | View Details |
| – |
Strong electrical or plastic smell when the oven is used, even after several uses.
|
Overheating of Electrical Components or Insulation | View Details |
| – |
Timer or clock does not keep correct time or loses settings when power is briefly interrupted.
|
Clock / Memory Backup Failure | View Details |
No matching codes found
Advertisements