Camp Chef
Camp Chef Pellet Grills & Smokers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
ASH
Display shows “ASH” or ash clean reminder; grill may prompt for cleaning after several hours of use.
Ash Cleanout Reminder
AUGER
Display shows “AUGER” or auger error; pellets do not feed and grill will not maintain temperature.
Auger Feed System Fault
ERR
Control panel displays “ERR” and grill will not start or respond to button presses.
General Control System Error
FAN
Display shows “FAN” or fan error; grill shuts down or will not start the ignition cycle.
Combustion Fan Failure
FLAME
Display shows “FLAME” or “FLAME OUT” and the grill stops feeding pellets and cools down.
Flame-Out Condition
FUSE
Display shows “FUSE” or grill is completely dead and internal fuse is blown repeatedly.
Blown Internal Fuse / Short Circuit
HERR
Display shows “HERR” or high temperature error; grill overshoots set temperature and then shuts down.
Over-Temperature Condition
HOP
Display shows “HOP” or hopper error; grill indicates a pellet feed issue.
Hopper / Pellet Feed Fault
IGN
Display shows “IGN” or ignition error; pellets feed but never ignite and grill times out.
Ignition Failure
LERR
Display shows “LERR” or low temperature error; grill cannot reach or maintain set temperature and may shut down.
Low-Temperature / Failure-to-Reach-Setpoint Fault
P-ERR
Display shows “P-ERR” or P-setting error; grill temperature swings widely and controller seems unresponsive to P-setting changes.
P-Setting Configuration Fault
P1
Controller shows “P1” P-setting; grill runs very hot and recovers temperature quickly but may overshoot.
Aggressive Pellet Feed Timing (User Setting)
P7
Controller shows “P7” P-setting; grill struggles to maintain temperature, especially in cold or windy weather.
Conservative Pellet Feed Timing (User Setting)
SEN
Display shows “SEN” or sensor error; grill will not heat correctly or shuts down.
Temperature Sensor (RTD) Fault
WiFi
Display or app shows “WiFi ERR” or cannot connect to Camp Chef Connect app.
WiFi Module Communication Fault
Symptom
Auger does not turn at all; no pellet feed, but other components (fan, igniter) work.
Auger Motor Non-Operation
Symptom
Auger makes loud grinding or squealing noises during operation.
Noisy Auger / Mechanical Binding
Symptom
Controller buttons are unresponsive or require very hard presses.
Worn or Contaminated Keypad
Symptom
Door or lid does not close evenly, leaving gaps and causing heat loss.
Misaligned or Warped Lid
Symptom
Excessive vibration or rattling noises from the grill body during operation.
Mechanical Vibration / Loose Panels
Symptom
Excessive white smoke during startup and cooking, with poor flame quality.
Incomplete Combustion / Smoky Burn
Symptom
Grease leaking from bottom of grill cabinet instead of into grease bucket.
Grease Drainage Failure
Symptom
Grill overshoots set temperature and then drops, causing large temperature swings during cooking.
Temperature Overshoot and Oscillation
Symptom
Grill paint blistering or discoloring around exhaust or firebox area.
Localized Overheating / Paint Failure
Symptom
Grill powers on but display is blank or unreadable; buttons may or may not respond.
Display / User Interface Failure
Symptom
Grill shuts off when lid is opened or closed, or only runs with lid in a certain position (on models with lid switch).
Faulty Lid Safety Switch
Symptom
Grill starts but shuts down mid-cook without any error code; fire goes out and temperature drops.
Intermittent Flame-Out Without Code
Symptom
Grill struggles to reach high temperatures (e.g., cannot exceed 300–350°F) even with fresh pellets.
Insufficient Heat Output
Symptom
Grill temperature is much higher than the setpoint, even at low settings, with no error code.
Runaway Temperature / Overheating Without Code
Symptom
Grill temperature reading is obviously wrong (e.g., shows 500°F when chamber is barely warm).
Temperature Sensor Misreading
Symptom
Grill trips the household breaker or GFCI outlet when turned on.
Ground Fault or Overcurrent
Symptom
Grill will not power on at all; no lights or display when switch is turned ON.
No Power / Dead Grill
Symptom
Igniter glows but pellets do not ignite; heavy smoke then flame-out.
Weak Ignition / Poor Combustion Start
Symptom
Lid thermometer reading does not match controller temperature or grate temperature.
Lid Thermometer Calibration Difference
Symptom
Pellets back-burning into hopper, with smoke or heat in the hopper area.
Back-Burn Through Auger Tube
Symptom
Persistent metallic or electrical burning smell during operation.
Overheating Electrical Component or Short
Symptom
Strong chemical or plastic smell during first few cooks.
Initial Burn-Off Odor
Symptom
Visible flames and popping noises from grease tray area; strong burning grease smell.
Grease Fire in Drip Tray
Symptom
WiFi app shows grill offline frequently, even when grill is powered and near router.
Unstable WiFi Connection
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| ASH |
Display shows “ASH” or ash clean reminder; grill may prompt for cleaning after several hours of use.
|
Ash Cleanout Reminder | View Details |
| AUGER |
Display shows “AUGER” or auger error; pellets do not feed and grill will not maintain temperature.
|
Auger Feed System Fault | View Details |
| ERR |
Control panel displays “ERR” and grill will not start or respond to button presses.
|
General Control System Error | View Details |
| FAN |
Display shows “FAN” or fan error; grill shuts down or will not start the ignition cycle.
|
Combustion Fan Failure | View Details |
| FLAME |
Display shows “FLAME” or “FLAME OUT” and the grill stops feeding pellets and cools down.
|
Flame-Out Condition | View Details |
| FUSE |
Display shows “FUSE” or grill is completely dead and internal fuse is blown repeatedly.
|
Blown Internal Fuse / Short Circuit | View Details |
| HERR |
Display shows “HERR” or high temperature error; grill overshoots set temperature and then shuts down.
|
Over-Temperature Condition | View Details |
| HOP |
Display shows “HOP” or hopper error; grill indicates a pellet feed issue.
|
Hopper / Pellet Feed Fault | View Details |
| IGN |
Display shows “IGN” or ignition error; pellets feed but never ignite and grill times out.
|
Ignition Failure | View Details |
| LERR |
Display shows “LERR” or low temperature error; grill cannot reach or maintain set temperature and may shut down.
|
Low-Temperature / Failure-to-Reach-Setpoint Fault | View Details |
| P-ERR |
Display shows “P-ERR” or P-setting error; grill temperature swings widely and controller seems unresponsive to P-setting changes.
|
P-Setting Configuration Fault | View Details |
| P1 |
Controller shows “P1” P-setting; grill runs very hot and recovers temperature quickly but may overshoot.
|
Aggressive Pellet Feed Timing (User Setting) | View Details |
| P7 |
Controller shows “P7” P-setting; grill struggles to maintain temperature, especially in cold or windy weather.
|
Conservative Pellet Feed Timing (User Setting) | View Details |
| SEN |
Display shows “SEN” or sensor error; grill will not heat correctly or shuts down.
|
Temperature Sensor (RTD) Fault | View Details |
| WiFi |
Display or app shows “WiFi ERR” or cannot connect to Camp Chef Connect app.
|
WiFi Module Communication Fault | View Details |
| – |
Auger does not turn at all; no pellet feed, but other components (fan, igniter) work.
|
Auger Motor Non-Operation | View Details |
| – |
Auger makes loud grinding or squealing noises during operation.
|
Noisy Auger / Mechanical Binding | View Details |
| – |
Controller buttons are unresponsive or require very hard presses.
|
Worn or Contaminated Keypad | View Details |
| – |
Door or lid does not close evenly, leaving gaps and causing heat loss.
|
Misaligned or Warped Lid | View Details |
| – |
Excessive vibration or rattling noises from the grill body during operation.
|
Mechanical Vibration / Loose Panels | View Details |
| – |
Excessive white smoke during startup and cooking, with poor flame quality.
|
Incomplete Combustion / Smoky Burn | View Details |
| – |
Grease leaking from bottom of grill cabinet instead of into grease bucket.
|
Grease Drainage Failure | View Details |
| – |
Grill overshoots set temperature and then drops, causing large temperature swings during cooking.
|
Temperature Overshoot and Oscillation | View Details |
| – |
Grill paint blistering or discoloring around exhaust or firebox area.
|
Localized Overheating / Paint Failure | View Details |
| – |
Grill powers on but display is blank or unreadable; buttons may or may not respond.
|
Display / User Interface Failure | View Details |
| – |
Grill shuts off when lid is opened or closed, or only runs with lid in a certain position (on models with lid switch).
|
Faulty Lid Safety Switch | View Details |
| – |
Grill starts but shuts down mid-cook without any error code; fire goes out and temperature drops.
|
Intermittent Flame-Out Without Code | View Details |
| – |
Grill struggles to reach high temperatures (e.g., cannot exceed 300–350°F) even with fresh pellets.
|
Insufficient Heat Output | View Details |
| – |
Grill temperature is much higher than the setpoint, even at low settings, with no error code.
|
Runaway Temperature / Overheating Without Code | View Details |
| – |
Grill temperature reading is obviously wrong (e.g., shows 500°F when chamber is barely warm).
|
Temperature Sensor Misreading | View Details |
| – |
Grill trips the household breaker or GFCI outlet when turned on.
|
Ground Fault or Overcurrent | View Details |
| – |
Grill will not power on at all; no lights or display when switch is turned ON.
|
No Power / Dead Grill | View Details |
| – |
Igniter glows but pellets do not ignite; heavy smoke then flame-out.
|
Weak Ignition / Poor Combustion Start | View Details |
| – |
Lid thermometer reading does not match controller temperature or grate temperature.
|
Lid Thermometer Calibration Difference | View Details |
| – |
Pellets back-burning into hopper, with smoke or heat in the hopper area.
|
Back-Burn Through Auger Tube | View Details |
| – |
Persistent metallic or electrical burning smell during operation.
|
Overheating Electrical Component or Short | View Details |
| – |
Strong chemical or plastic smell during first few cooks.
|
Initial Burn-Off Odor | View Details |
| – |
Visible flames and popping noises from grease tray area; strong burning grease smell.
|
Grease Fire in Drip Tray | View Details |
| – |
WiFi app shows grill offline frequently, even when grill is powered and near router.
|
Unstable WiFi Connection | View Details |
No matching codes found
Advertisements