De Dietrich Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
d0
Oven display shows d0 and the oven will not heat.
Door Open / Door Lock Not Engaged (Pyrolytic Models)
d1
Oven shows d1 and will not start a pyrolytic cleaning cycle.
Door Lock Feedback Error
E0
Induction zone shows E0 when a pan is placed and does not heat.
No Pan Detected / Incompatible Cookware
E1
Induction hob shows E1 and shuts down shortly after switching on.
NTC Sensor Open / Temperature Sensor Fault
E2
Induction hob displays E2 and zones shut down during cooking.
NTC Sensor Short / Overtemperature Reading
E3
Induction hob shows E3 when trying to use high power or booster function.
Overvoltage / Supply Voltage Too High
E4
Induction hob shows E4 and one zone cannot be used.
Zone-Specific Overheat / Sensor Fault
E5
Induction hob displays E5 and all zones shut down after some minutes of use.
General Electronics Overheat
E6
Induction hob shows E6 and does not start any zone.
Internal Communication Error Between Boards
E7
Induction hob shows E7 when attempting to use the timer or special functions.
User Interface Logic Fault
E8
Induction hob shows E8 and power levels cannot be adjusted correctly.
Power Control Calibration Error
E9
Induction hob shows E9 and immediately shuts down when a zone is activated.
Internal Power Supply Fault
Err
Oven or range display shows Err and beeps, functions are limited or disabled.
General Control Error / Keypad Fault
F01
Induction hob zone will not heat, display shows F01 when attempting to start a cooking zone.
Induction Power Module Overheat / Internal Fault
F02
One or more induction zones do not respond and the display shows F02.
Induction Zone Power Stage Fault
F03
Induction cooktop beeps and shows F03, zones shut down shortly after starting.
Cooktop Overtemperature Protection Triggered
F04
Induction hob displays F04 and refuses to start any zone.
Touch Control Panel Communication Error
F05
Induction cooktop shows F05 on one or more zones, often with beeping when a pan is placed.
Pan Detection / Induction Sensor Fault
F06
Induction hob shows F06 and all zones are disabled.
Supply Voltage Out of Range / Phase Error
F07
Induction cooktop intermittently shuts down with F07, often when multiple zones are used at high power.
Overcurrent / Power Management Fault
F08
Induction hob displays F08 and does not respond to touch controls.
Touch Key Panel Fault / Stuck Key
F09
Induction cooktop shows F09 and one side (left or right group of zones) is inoperative.
Half-Bridge / Side Power Module Failure
F10
Induction hob displays F10 and all zones are locked out.
Internal EEPROM / Configuration Error
F12
Oven display shows F12 and heating does not start.
Oven Temperature Sensor (Probe) Fault
F13
Oven shows F13 and fan-assisted modes do not work correctly.
Cooling or Convection Fan Fault
F20
Oven shows F20 and will not start any heating function.
Relay Board / Power Board Fault
F30
Gas cooktop with electronic ignition shows F30 on the display and burners will not ignite.
Ignition System Fault
Symptom
All gas burners spark continuously even when knobs are in the OFF position.
Stuck Ignition Switch / Moisture in Ignition System
Symptom
Electric oven does not heat in any mode, but the display and light work.
No Power to Heating Elements
Symptom
Gas burner flame is yellow, noisy, or lifts off the burner head.
Incorrect Combustion / Air-Gas Mixture Problem
Symptom
Gas burner goes out when knob is released, especially on low flame.
Flame Failure Device (Thermocouple) Not Holding
Symptom
Gas burner will not ignite or takes a long time to light, but other burners work normally.
Individual Burner Ignition Failure
Symptom
Glass-ceramic cooktop surface is cracked or shattered.
Damaged Glass Top
Symptom
Induction cooktop controls are unresponsive, but power indicator is on.
Locked Controls / Touch Panel Failure
Symptom
Induction cooktop makes loud buzzing or humming noises at certain power levels.
Induction Coil Vibration / Acoustic Noise
Symptom
Induction cooktop shuts off randomly during cooking without showing an error code.
Thermal or Power Interruption Without Displayed Fault
Symptom
Oven door does not close properly, heat escapes around the edges.
Door Alignment / Seal Failure
Symptom
Oven fan runs but there is little or no heat in fan-assisted modes.
Failed Convection Heating Element
Symptom
Oven interior light does not work, but oven heats normally.
Failed Oven Lamp Circuit
Symptom
Oven light and display turn off during cooking, then come back on after cooling.
Overheating / Tripping Thermal Cut-Out
Symptom
Oven overheats, burning food even at low temperature settings.
Temperature Regulation Failure
Symptom
Strong burning smell or smoke from oven during normal cooking (not first use or pyrolytic cleaning).
Overheating or Contamination on Heating Elements
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| d0 |
Oven display shows d0 and the oven will not heat.
|
Door Open / Door Lock Not Engaged (Pyrolytic Models) | View Details |
| d1 |
Oven shows d1 and will not start a pyrolytic cleaning cycle.
|
Door Lock Feedback Error | View Details |
| E0 |
Induction zone shows E0 when a pan is placed and does not heat.
|
No Pan Detected / Incompatible Cookware | View Details |
| E1 |
Induction hob shows E1 and shuts down shortly after switching on.
|
NTC Sensor Open / Temperature Sensor Fault | View Details |
| E2 |
Induction hob displays E2 and zones shut down during cooking.
|
NTC Sensor Short / Overtemperature Reading | View Details |
| E3 |
Induction hob shows E3 when trying to use high power or booster function.
|
Overvoltage / Supply Voltage Too High | View Details |
| E4 |
Induction hob shows E4 and one zone cannot be used.
|
Zone-Specific Overheat / Sensor Fault | View Details |
| E5 |
Induction hob displays E5 and all zones shut down after some minutes of use.
|
General Electronics Overheat | View Details |
| E6 |
Induction hob shows E6 and does not start any zone.
|
Internal Communication Error Between Boards | View Details |
| E7 |
Induction hob shows E7 when attempting to use the timer or special functions.
|
User Interface Logic Fault | View Details |
| E8 |
Induction hob shows E8 and power levels cannot be adjusted correctly.
|
Power Control Calibration Error | View Details |
| E9 |
Induction hob shows E9 and immediately shuts down when a zone is activated.
|
Internal Power Supply Fault | View Details |
| Err |
Oven or range display shows Err and beeps, functions are limited or disabled.
|
General Control Error / Keypad Fault | View Details |
| F01 |
Induction hob zone will not heat, display shows F01 when attempting to start a cooking zone.
|
Induction Power Module Overheat / Internal Fault | View Details |
| F02 |
One or more induction zones do not respond and the display shows F02.
|
Induction Zone Power Stage Fault | View Details |
| F03 |
Induction cooktop beeps and shows F03, zones shut down shortly after starting.
|
Cooktop Overtemperature Protection Triggered | View Details |
| F04 |
Induction hob displays F04 and refuses to start any zone.
|
Touch Control Panel Communication Error | View Details |
| F05 |
Induction cooktop shows F05 on one or more zones, often with beeping when a pan is placed.
|
Pan Detection / Induction Sensor Fault | View Details |
| F06 |
Induction hob shows F06 and all zones are disabled.
|
Supply Voltage Out of Range / Phase Error | View Details |
| F07 |
Induction cooktop intermittently shuts down with F07, often when multiple zones are used at high power.
|
Overcurrent / Power Management Fault | View Details |
| F08 |
Induction hob displays F08 and does not respond to touch controls.
|
Touch Key Panel Fault / Stuck Key | View Details |
| F09 |
Induction cooktop shows F09 and one side (left or right group of zones) is inoperative.
|
Half-Bridge / Side Power Module Failure | View Details |
| F10 |
Induction hob displays F10 and all zones are locked out.
|
Internal EEPROM / Configuration Error | View Details |
| F12 |
Oven display shows F12 and heating does not start.
|
Oven Temperature Sensor (Probe) Fault | View Details |
| F13 |
Oven shows F13 and fan-assisted modes do not work correctly.
|
Cooling or Convection Fan Fault | View Details |
| F20 |
Oven shows F20 and will not start any heating function.
|
Relay Board / Power Board Fault | View Details |
| F30 |
Gas cooktop with electronic ignition shows F30 on the display and burners will not ignite.
|
Ignition System Fault | View Details |
| – |
All gas burners spark continuously even when knobs are in the OFF position.
|
Stuck Ignition Switch / Moisture in Ignition System | View Details |
| – |
Electric oven does not heat in any mode, but the display and light work.
|
No Power to Heating Elements | View Details |
| – |
Gas burner flame is yellow, noisy, or lifts off the burner head.
|
Incorrect Combustion / Air-Gas Mixture Problem | View Details |
| – |
Gas burner goes out when knob is released, especially on low flame.
|
Flame Failure Device (Thermocouple) Not Holding | View Details |
| – |
Gas burner will not ignite or takes a long time to light, but other burners work normally.
|
Individual Burner Ignition Failure | View Details |
| – |
Glass-ceramic cooktop surface is cracked or shattered.
|
Damaged Glass Top | View Details |
| – |
Induction cooktop controls are unresponsive, but power indicator is on.
|
Locked Controls / Touch Panel Failure | View Details |
| – |
Induction cooktop makes loud buzzing or humming noises at certain power levels.
|
Induction Coil Vibration / Acoustic Noise | View Details |
| – |
Induction cooktop shuts off randomly during cooking without showing an error code.
|
Thermal or Power Interruption Without Displayed Fault | View Details |
| – |
Oven door does not close properly, heat escapes around the edges.
|
Door Alignment / Seal Failure | View Details |
| – |
Oven fan runs but there is little or no heat in fan-assisted modes.
|
Failed Convection Heating Element | View Details |
| – |
Oven interior light does not work, but oven heats normally.
|
Failed Oven Lamp Circuit | View Details |
| – |
Oven light and display turn off during cooking, then come back on after cooling.
|
Overheating / Tripping Thermal Cut-Out | View Details |
| – |
Oven overheats, burning food even at low temperature settings.
|
Temperature Regulation Failure | View Details |
| – |
Strong burning smell or smoke from oven during normal cooking (not first use or pyrolytic cleaning).
|
Overheating or Contamination on Heating Elements | View Details |
No matching codes found
Advertisements