Falcon
Falcon Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F1
Electric Falcon range shows F1 on the display and beeps continuously; oven functions may be disabled.
Oven Temperature Sensor or Control Board Fault
F10
F10 displayed on Falcon range; oven may continue heating uncontrollably until power is cut.
Runaway Oven Temperature / Stuck Relay
F2
Falcon electric oven displays F2 and may shut off during or shortly after a cooking cycle, often when set to high temperatures.
Oven Over-Temperature Condition
F20
Induction Falcon cooktop zone shows F20 and will not heat when a pan is placed on it.
Pan Detection / Induction Coil Fault
F21
Induction Falcon cooktop displays F21 and all zones may be disabled.
Induction Power Module Overheat or Overcurrent
F22
Falcon induction cooktop shows F22 on one or more zones; touch controls may still respond.
Cooktop Glass Temperature Sensor Fault
F3
Falcon range shows F3 and disables the oven; often appears shortly after starting a bake cycle.
Oven Temperature Sensor Circuit Open
F30
Gas Falcon range with electronic ignition shows F30 and burners will not ignite automatically.
Ignition System Fault
F31
Single burner on a Falcon gas cooktop shows F31 (if equipped with display) or fails to ignite while others work normally.
Individual Burner Ignition Failure
F4
Falcon range displays F4 and may prevent oven operation; sometimes intermittent depending on temperature.
Oven Temperature Sensor Circuit Shorted
F40
Falcon dual-fuel range shows F40 and oven gas burner does not light; fan may run.
Oven Gas Ignition / Flame Detection Fault
F5
Display shows F5 and oven functions are locked out on a Falcon electric range.
Oven Door Lock / Latch Fault
F50
Falcon range display shows F50 and none of the oven functions operate; clock may be blank or flickering.
Low Voltage / Power Supply Fault
F60
Falcon range shows F60 and the oven fan does not run in fan-assisted modes.
Convection / Circulation Fan Fault
F7
Falcon range shows F7 and keypad or touch controls do not respond correctly; random beeping may occur.
Keypad / Touch Control Stuck or Shorted
F70
Falcon range shows F70 and the warming drawer or storage drawer heater does not operate (on models with heated drawers).
Warming Drawer Temperature Sensor / Heater Fault
F8
F8 appears on the Falcon range display; cooling fan may run continuously or not at all.
Cooling Fan or Overheat Protection Fault
F9
Falcon oven shows F9 and may not heat; sometimes accompanied by tripping the breaker.
Oven Relay or Power Supply Fault
F90
Falcon range shows F90 and the oven door will not unlock after a high-temperature or pyrolytic cleaning cycle (on models with self-clean).
Self-Clean Door Lock Fault
Symptom
Control knobs on Falcon range are very stiff or difficult to turn.
Seized Gas Valve or Contaminated Control Shaft
Symptom
Cooktop glass is cracked or shattered on a Falcon range or hob.
Damaged Ceramic / Glass Top
Symptom
Cooling fan at the top of the Falcon range runs continuously even when the oven is off and cool.
Stuck Cooling Fan Control / Sensor Fault
Symptom
Digital clock and timer on Falcon range reset randomly or lose time.
Unstable Power to Control / Failing Clock PCB
Symptom
Excessive noise from the oven during operation, such as rattling, grinding, or squealing.
Mechanical Noise from Fan or Loose Components
Symptom
Falcon range trips the household circuit breaker when the oven or a specific function is turned on.
Electrical Short / Earth Leakage
Symptom
Gas hob burner flame is yellow, noisy, or lifts off the burner instead of being blue and stable.
Incorrect Combustion / Air–Gas Mixture Fault
Symptom
Gas hob burner goes out when turned down to low; cannot maintain a simmer.
Poor Low-Flame Stability
Symptom
Gas oven lights but goes out after a few seconds; may repeatedly try to ignite.
Flame Sensing / Safety Shutdown
Symptom
Gas oven will not light; you hear clicking but no flame appears.
No Ignition (Gas Oven)
Symptom
Induction cooktop does not power on at all; no lights or beeps.
No Power to Induction Cooktop
Symptom
Induction cooktop powers on but shows pan symbol flashing and will not heat even with a pan present.
Pan Detection / Load Sensing Issue
Symptom
One or more gas hob burners will not ignite; you can light them with a match but not with the built-in igniter.
Hob Burner Ignition Failure
Symptom
Oven does not heat at all on an electric Falcon range; display and lights work but no warmth in any mode.
No-Heat Condition (Electric Oven)
Symptom
Oven door does not close fully; heat escapes and front of range becomes very hot.
Door Alignment / Hinge or Seal Failure
Symptom
Oven door glass is loose, rattling, or has condensation between panes.
Door Glass Assembly / Seal Failure
Symptom
Oven heats but does not reach the set temperature or takes excessively long to cook food.
Underheating / Temperature Calibration Fault
Symptom
Oven light does not work, but oven heats normally.
Oven Cavity Illumination Failure
Symptom
Oven overheats and burns food even at moderate settings; exterior of Falcon range may feel excessively hot.
Overheating / Thermostat Control Failure
Symptom
Oven produces smoke and burning smell during normal cooking (not first use).
Grease Build-Up / Spillage on Elements
Symptom
Strong gas smell around Falcon range, especially when burners are off.
Gas Leak / Unsealed Connection
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F1 |
Electric Falcon range shows F1 on the display and beeps continuously; oven functions may be disabled.
|
Oven Temperature Sensor or Control Board Fault | View Details |
| F10 |
F10 displayed on Falcon range; oven may continue heating uncontrollably until power is cut.
|
Runaway Oven Temperature / Stuck Relay | View Details |
| F2 |
Falcon electric oven displays F2 and may shut off during or shortly after a cooking cycle, often when set to high temperatures.
|
Oven Over-Temperature Condition | View Details |
| F20 |
Induction Falcon cooktop zone shows F20 and will not heat when a pan is placed on it.
|
Pan Detection / Induction Coil Fault | View Details |
| F21 |
Induction Falcon cooktop displays F21 and all zones may be disabled.
|
Induction Power Module Overheat or Overcurrent | View Details |
| F22 |
Falcon induction cooktop shows F22 on one or more zones; touch controls may still respond.
|
Cooktop Glass Temperature Sensor Fault | View Details |
| F3 |
Falcon range shows F3 and disables the oven; often appears shortly after starting a bake cycle.
|
Oven Temperature Sensor Circuit Open | View Details |
| F30 |
Gas Falcon range with electronic ignition shows F30 and burners will not ignite automatically.
|
Ignition System Fault | View Details |
| F31 |
Single burner on a Falcon gas cooktop shows F31 (if equipped with display) or fails to ignite while others work normally.
|
Individual Burner Ignition Failure | View Details |
| F4 |
Falcon range displays F4 and may prevent oven operation; sometimes intermittent depending on temperature.
|
Oven Temperature Sensor Circuit Shorted | View Details |
| F40 |
Falcon dual-fuel range shows F40 and oven gas burner does not light; fan may run.
|
Oven Gas Ignition / Flame Detection Fault | View Details |
| F5 |
Display shows F5 and oven functions are locked out on a Falcon electric range.
|
Oven Door Lock / Latch Fault | View Details |
| F50 |
Falcon range display shows F50 and none of the oven functions operate; clock may be blank or flickering.
|
Low Voltage / Power Supply Fault | View Details |
| F60 |
Falcon range shows F60 and the oven fan does not run in fan-assisted modes.
|
Convection / Circulation Fan Fault | View Details |
| F7 |
Falcon range shows F7 and keypad or touch controls do not respond correctly; random beeping may occur.
|
Keypad / Touch Control Stuck or Shorted | View Details |
| F70 |
Falcon range shows F70 and the warming drawer or storage drawer heater does not operate (on models with heated drawers).
|
Warming Drawer Temperature Sensor / Heater Fault | View Details |
| F8 |
F8 appears on the Falcon range display; cooling fan may run continuously or not at all.
|
Cooling Fan or Overheat Protection Fault | View Details |
| F9 |
Falcon oven shows F9 and may not heat; sometimes accompanied by tripping the breaker.
|
Oven Relay or Power Supply Fault | View Details |
| F90 |
Falcon range shows F90 and the oven door will not unlock after a high-temperature or pyrolytic cleaning cycle (on models with self-clean).
|
Self-Clean Door Lock Fault | View Details |
| – |
Control knobs on Falcon range are very stiff or difficult to turn.
|
Seized Gas Valve or Contaminated Control Shaft | View Details |
| – |
Cooktop glass is cracked or shattered on a Falcon range or hob.
|
Damaged Ceramic / Glass Top | View Details |
| – |
Cooling fan at the top of the Falcon range runs continuously even when the oven is off and cool.
|
Stuck Cooling Fan Control / Sensor Fault | View Details |
| – |
Digital clock and timer on Falcon range reset randomly or lose time.
|
Unstable Power to Control / Failing Clock PCB | View Details |
| – |
Excessive noise from the oven during operation, such as rattling, grinding, or squealing.
|
Mechanical Noise from Fan or Loose Components | View Details |
| – |
Falcon range trips the household circuit breaker when the oven or a specific function is turned on.
|
Electrical Short / Earth Leakage | View Details |
| – |
Gas hob burner flame is yellow, noisy, or lifts off the burner instead of being blue and stable.
|
Incorrect Combustion / Air–Gas Mixture Fault | View Details |
| – |
Gas hob burner goes out when turned down to low; cannot maintain a simmer.
|
Poor Low-Flame Stability | View Details |
| – |
Gas oven lights but goes out after a few seconds; may repeatedly try to ignite.
|
Flame Sensing / Safety Shutdown | View Details |
| – |
Gas oven will not light; you hear clicking but no flame appears.
|
No Ignition (Gas Oven) | View Details |
| – |
Induction cooktop does not power on at all; no lights or beeps.
|
No Power to Induction Cooktop | View Details |
| – |
Induction cooktop powers on but shows pan symbol flashing and will not heat even with a pan present.
|
Pan Detection / Load Sensing Issue | View Details |
| – |
One or more gas hob burners will not ignite; you can light them with a match but not with the built-in igniter.
|
Hob Burner Ignition Failure | View Details |
| – |
Oven does not heat at all on an electric Falcon range; display and lights work but no warmth in any mode.
|
No-Heat Condition (Electric Oven) | View Details |
| – |
Oven door does not close fully; heat escapes and front of range becomes very hot.
|
Door Alignment / Hinge or Seal Failure | View Details |
| – |
Oven door glass is loose, rattling, or has condensation between panes.
|
Door Glass Assembly / Seal Failure | View Details |
| – |
Oven heats but does not reach the set temperature or takes excessively long to cook food.
|
Underheating / Temperature Calibration Fault | View Details |
| – |
Oven light does not work, but oven heats normally.
|
Oven Cavity Illumination Failure | View Details |
| – |
Oven overheats and burns food even at moderate settings; exterior of Falcon range may feel excessively hot.
|
Overheating / Thermostat Control Failure | View Details |
| – |
Oven produces smoke and burning smell during normal cooking (not first use).
|
Grease Build-Up / Spillage on Elements | View Details |
| – |
Strong gas smell around Falcon range, especially when burners are off.
|
Gas Leak / Unsealed Connection | View Details |
No matching codes found
Advertisements