Danby Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Washer-dryer combo will not fill with water; cycle stops shortly after start and displays E1.
Water Inlet Timeout / No Fill
E10
Washer-dryer combo displays E10 and will not start; control panel may light but no functions respond.
User Interface / Control Panel Error
E11
Washer-dryer combo shows E11 and may overfill or underfill; water level seems incorrect.
Water Level Calibration / Sensor Range Error
E12
Washer-dryer combo displays E12 and stops; often associated with overheating during drying.
Dryer Overheat / Exhaust Blockage
E13
Washer-dryer combo shows E13 and may leak or stop with water detected in base pan.
Leak Detection / Overflow Protection
E14
Washer-dryer combo displays E14 and may not spin properly; speed sensing appears incorrect.
Motor Tachometer / Speed Sensor Error
E15
Washer-dryer combo shows E15 and may not drain or spin; often associated with pump or motor overload.
Overcurrent Protection / Motor or Pump Overload
E16
Washer-dryer combo displays E16 and may not take in detergent or softener properly.
Dispenser Valve / Solenoid Error
E17
Washer-dryer combo shows E17 and may not start; often related to door not closing or locking correctly.
Door Not Closed / Door Ajar Detection
E18
Washer-dryer combo displays E18 and may stop with water in drum; often indicates slow drain.
Slow Drain / Partial Blockage
E19
Washer-dryer combo shows E19 and may not heat properly during drying; temperature control seems erratic.
Dryer Temperature Sensor (NTC) Error
E2
Washer-dryer combo does not drain; water remains in drum and E2 is displayed.
Drain Pump Failure / Drain Timeout
E20
Washer-dryer combo displays E20 and may not advance cycles correctly; timing seems off.
Program Timing / Control Logic Error
E3
Washer-dryer combo drum does not spin or only jerks; E3 appears during wash or spin.
Motor Drive Fault / Motor Overload
E4
Washer-dryer combo displays E4 and stops; drum may be heavily loaded or banging.
Unbalanced Load / Out-of-Balance Detection
E5
Washer-dryer combo shows E5 and stops heating water; cycles may run with only cold water.
Water Heating Fault
E6
Washer-dryer combo displays E6 and will not start or stops mid-cycle; door may not lock properly.
Door Lock / Door Switch Error
E7
Washer-dryer combo shows E7 and may not detect water level correctly; overfilling or underfilling can occur.
Water Level Sensor / Pressure Switch Error
E8
Washer-dryer combo displays E8 during drying; clothes remain damp and no heat is felt in dryer mode.
Dryer Heating Fault
E9
Washer-dryer combo shows E9 and may stop mid-cycle; control panel may be unresponsive or behave erratically.
Main Control Board Communication / Internal Fault
Symptom
Washer-dryer combo causes circuit breaker to trip during operation.
Electrical Short / Overcurrent
Symptom
Washer-dryer combo displays lights but the display is dim or flickering.
Display Power / Backlight Issue
Symptom
Washer-dryer combo does not dry clothes effectively; clothes come out damp even after full drying cycle, no error code.
Poor Drying Performance
Symptom
Washer-dryer combo does not fill with enough water; clothes appear barely wet.
Low Water Level / Underfilling
Symptom
Washer-dryer combo door will not lock; cycle will not start.
Door Fails to Lock
Symptom
Washer-dryer combo door will not unlock at end of cycle; clothes are trapped inside.
Door Lock Stuck / Door Will Not Unlock
Symptom
Washer-dryer combo emits a burning smell during wash or spin.
Overheating Component / Belt Slippage
Symptom
Washer-dryer combo emits a musty or moldy odor from the drum and door area.
Biofilm / Mold Growth in Drum and Gasket
Symptom
Washer-dryer combo fills and agitates but will not drain; water remains in drum at end of cycle, no error code.
Drain System Blockage
Symptom
Washer-dryer combo is very noisy during spin; loud rumbling or grinding sound from drum area.
Drum Bearing Wear / Tub Bearing Failure
Symptom
Washer-dryer combo leaks water from the front door area during wash.
Door Gasket / Boot Seal Leak
Symptom
Washer-dryer combo leaks water from the rear or bottom during fill or wash.
Internal Hose or Tub Leak
Symptom
Washer-dryer combo leaves clothes soaking wet at end of cycle; spin seems weak or does not reach full speed.
No High-Speed Spin / Spin Performance Issue
Symptom
Washer-dryer combo leaves detergent residue on clothes after wash.
Poor Rinsing / Detergent Dispensing Issue
Symptom
Washer-dryer combo makes a clicking or rattling noise during wash or spin.
Foreign Object in Drum or Pump
Symptom
Washer-dryer combo makes a high-pitched squealing noise during spin.
Belt or Pulley Squeal
Symptom
Washer-dryer combo makes a loud banging or knocking noise during spin; unit may move or "walk" across the floor.
Excessive Vibration / Suspension Failure
Symptom
Washer-dryer combo overfills or water level is too high in drum.
Overfilling / Water Level Control Failure
Symptom
Washer-dryer combo powers on but will not start any cycle; pressing Start does nothing.
Start Circuit / Safety Interlock Inhibition
Symptom
Washer-dryer combo takes excessively long to dry; cycle times are much longer than normal.
Extended Dry Time / Moisture Removal Inefficiency
Symptom
Washer-dryer combo will not power on at all; no lights or display, completely dead.
No Power / Power Supply Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Washer-dryer combo will not fill with water; cycle stops shortly after start and displays E1.
|
Water Inlet Timeout / No Fill | View Details |
| E10 |
Washer-dryer combo displays E10 and will not start; control panel may light but no functions respond.
|
User Interface / Control Panel Error | View Details |
| E11 |
Washer-dryer combo shows E11 and may overfill or underfill; water level seems incorrect.
|
Water Level Calibration / Sensor Range Error | View Details |
| E12 |
Washer-dryer combo displays E12 and stops; often associated with overheating during drying.
|
Dryer Overheat / Exhaust Blockage | View Details |
| E13 |
Washer-dryer combo shows E13 and may leak or stop with water detected in base pan.
|
Leak Detection / Overflow Protection | View Details |
| E14 |
Washer-dryer combo displays E14 and may not spin properly; speed sensing appears incorrect.
|
Motor Tachometer / Speed Sensor Error | View Details |
| E15 |
Washer-dryer combo shows E15 and may not drain or spin; often associated with pump or motor overload.
|
Overcurrent Protection / Motor or Pump Overload | View Details |
| E16 |
Washer-dryer combo displays E16 and may not take in detergent or softener properly.
|
Dispenser Valve / Solenoid Error | View Details |
| E17 |
Washer-dryer combo shows E17 and may not start; often related to door not closing or locking correctly.
|
Door Not Closed / Door Ajar Detection | View Details |
| E18 |
Washer-dryer combo displays E18 and may stop with water in drum; often indicates slow drain.
|
Slow Drain / Partial Blockage | View Details |
| E19 |
Washer-dryer combo shows E19 and may not heat properly during drying; temperature control seems erratic.
|
Dryer Temperature Sensor (NTC) Error | View Details |
| E2 |
Washer-dryer combo does not drain; water remains in drum and E2 is displayed.
|
Drain Pump Failure / Drain Timeout | View Details |
| E20 |
Washer-dryer combo displays E20 and may not advance cycles correctly; timing seems off.
|
Program Timing / Control Logic Error | View Details |
| E3 |
Washer-dryer combo drum does not spin or only jerks; E3 appears during wash or spin.
|
Motor Drive Fault / Motor Overload | View Details |
| E4 |
Washer-dryer combo displays E4 and stops; drum may be heavily loaded or banging.
|
Unbalanced Load / Out-of-Balance Detection | View Details |
| E5 |
Washer-dryer combo shows E5 and stops heating water; cycles may run with only cold water.
|
Water Heating Fault | View Details |
| E6 |
Washer-dryer combo displays E6 and will not start or stops mid-cycle; door may not lock properly.
|
Door Lock / Door Switch Error | View Details |
| E7 |
Washer-dryer combo shows E7 and may not detect water level correctly; overfilling or underfilling can occur.
|
Water Level Sensor / Pressure Switch Error | View Details |
| E8 |
Washer-dryer combo displays E8 during drying; clothes remain damp and no heat is felt in dryer mode.
|
Dryer Heating Fault | View Details |
| E9 |
Washer-dryer combo shows E9 and may stop mid-cycle; control panel may be unresponsive or behave erratically.
|
Main Control Board Communication / Internal Fault | View Details |
| – |
Washer-dryer combo causes circuit breaker to trip during operation.
|
Electrical Short / Overcurrent | View Details |
| – |
Washer-dryer combo displays lights but the display is dim or flickering.
|
Display Power / Backlight Issue | View Details |
| – |
Washer-dryer combo does not dry clothes effectively; clothes come out damp even after full drying cycle, no error code.
|
Poor Drying Performance | View Details |
| – |
Washer-dryer combo does not fill with enough water; clothes appear barely wet.
|
Low Water Level / Underfilling | View Details |
| – |
Washer-dryer combo door will not lock; cycle will not start.
|
Door Fails to Lock | View Details |
| – |
Washer-dryer combo door will not unlock at end of cycle; clothes are trapped inside.
|
Door Lock Stuck / Door Will Not Unlock | View Details |
| – |
Washer-dryer combo emits a burning smell during wash or spin.
|
Overheating Component / Belt Slippage | View Details |
| – |
Washer-dryer combo emits a musty or moldy odor from the drum and door area.
|
Biofilm / Mold Growth in Drum and Gasket | View Details |
| – |
Washer-dryer combo fills and agitates but will not drain; water remains in drum at end of cycle, no error code.
|
Drain System Blockage | View Details |
| – |
Washer-dryer combo is very noisy during spin; loud rumbling or grinding sound from drum area.
|
Drum Bearing Wear / Tub Bearing Failure | View Details |
| – |
Washer-dryer combo leaks water from the front door area during wash.
|
Door Gasket / Boot Seal Leak | View Details |
| – |
Washer-dryer combo leaks water from the rear or bottom during fill or wash.
|
Internal Hose or Tub Leak | View Details |
| – |
Washer-dryer combo leaves clothes soaking wet at end of cycle; spin seems weak or does not reach full speed.
|
No High-Speed Spin / Spin Performance Issue | View Details |
| – |
Washer-dryer combo leaves detergent residue on clothes after wash.
|
Poor Rinsing / Detergent Dispensing Issue | View Details |
| – |
Washer-dryer combo makes a clicking or rattling noise during wash or spin.
|
Foreign Object in Drum or Pump | View Details |
| – |
Washer-dryer combo makes a high-pitched squealing noise during spin.
|
Belt or Pulley Squeal | View Details |
| – |
Washer-dryer combo makes a loud banging or knocking noise during spin; unit may move or "walk" across the floor.
|
Excessive Vibration / Suspension Failure | View Details |
| – |
Washer-dryer combo overfills or water level is too high in drum.
|
Overfilling / Water Level Control Failure | View Details |
| – |
Washer-dryer combo powers on but will not start any cycle; pressing Start does nothing.
|
Start Circuit / Safety Interlock Inhibition | View Details |
| – |
Washer-dryer combo takes excessively long to dry; cycle times are much longer than normal.
|
Extended Dry Time / Moisture Removal Inefficiency | View Details |
| – |
Washer-dryer combo will not power on at all; no lights or display, completely dead.
|
No Power / Power Supply Failure | View Details |
No matching codes found
Advertisements