Zanussi Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E10
Washer-dryer does not fill with water or fills very slowly, cycle stops early with E10 on display.
Water Inlet Timeout / Fill Fault
E11
Washer-dryer attempts to fill but stops with E11, drum remains almost empty of water.
No Water Fill Detected
E13
Washer-dryer shows E13 and may stop mid-cycle; water may be detected in the base tray or under the machine.
Water Leakage Detected / Anti-Flood Activation
E20
Washer-dryer does not drain water, stops with E20, clothes remain wet and drum full or partially full of water.
Drain Pump / Drainage Fault
E21
Washer-dryer attempts to drain but stops with E21; pump may be noisy or jammed, water remains in drum.
Drain Pump Blocked or Jammed
E23
Washer-dryer shows E23, will not drain or start a cycle; you may hear no pump activity.
Drain Pump Triac / Pump Control Fault
E24
Washer-dryer displays E24, often after a drain-related issue; pump may run continuously or not at all.
Drain Pump Feedback / Control Error
E30
Washer-dryer shows E30 and may not start or may stop mid-cycle; sometimes accompanied by door lock issues.
Door Lock / Door Interlock Fault
E31
Washer-dryer shows E31, may overfill or underfill, and water levels appear incorrect.
Pressure Sensor Signal Fault
E32
Washer-dryer intermittently shows E32, may stop during fill or spin, water level seems inconsistent.
Pressure Sensor Calibration / Out-of-Range Signal
E33
Washer-dryer shows E33 and may have issues heating or controlling water level correctly.
Pressure System / Heater Safety Conflict
E34
Washer-dryer displays E34, often at the start of a cycle, and may not proceed to fill or heat.
Dual-Level Pressure Switch / Safety Level Error
E35
Washer-dryer overfills with water or shows E35, sometimes causing water to reach the door glass.
Overfill / Overpressure Fault
E38
Washer-dryer shows E38, often with incorrect water levels or poor rinsing performance.
Blocked Pressure Chamber / No Pressure Change Detected
E40
Washer-dryer will not start; E40 or a flashing door symbol appears, door may not lock.
Door Not Properly Closed / Door Lock Error
E41
Washer-dryer shows E41; door appears closed but machine reports it as open.
Door Open Signal Fault
E42
Washer-dryer shows E42 and may not unlock the door at the end of the cycle.
Door Unlock Fault
E43
Washer-dryer shows E43; door lock may click repeatedly or not engage at all.
Door Lock Triac / Control Fault
E44
Washer-dryer intermittently shows E44; door status seems inconsistent (machine thinks door is open/closed incorrectly).
Door Status Sensor Fault
E45
Washer-dryer shows E45; door lock and control board communication error.
Door Lock Control Circuit Fault
E50
Washer-dryer shows E50; drum may not turn or may stop suddenly during wash or spin.
General Motor / Drive Fault
E51
Washer-dryer shows E51; motor may not start, or there may be sparking or tripping of the breaker.
Motor Power Triac Short Circuit
E52
Washer-dryer shows E52; drum may spin erratically or not at all, speeds are incorrect.
Tachometer Signal Fault
E53
Washer-dryer shows E53; motor may not respond correctly to speed commands.
Motor Control Circuit Fault
E54
Washer-dryer shows E54; motor may start and stop abruptly or not reverse direction.
Motor Relay / Direction Control Fault
E60
Washer-dryer shows E60; drying or washing heating does not work properly.
General Heating System Fault
E61
Washer-dryer shows E61; water does not reach the set temperature during wash.
Wash Heating Time-Out
E62
Washer-dryer shows E62; water overheats during wash, possible very hot drum or steam.
Overheating During Wash
E63
Washer-dryer shows E63; drying cycle does not heat or stops early.
Dryer Heater Fault / Overheat Protection
E64
Washer-dryer shows E64; drying performance is poor or non-existent, but fan may run.
Dryer Heater Circuit Fault
E66
Washer-dryer shows E66; heating does not start or stops unexpectedly.
Heater Relay Fault
E70
Washer-dryer shows E70; temperature readings appear incorrect, cycles may be too hot or too cold.
General NTC Sensor Fault
E90
Washer-dryer shows E90; control panel may be unresponsive or display random symbols.
Communication Error Between User Interface and Main PCB
E91
Washer-dryer shows E91; display may be blank or show limited information.
No Communication with User Interface
E92
Washer-dryer shows E92; some buttons may not respond or wrong functions are triggered.
User Interface Configuration / Communication Error
E93
Washer-dryer shows E93; machine may not start any program.
Configuration Error / Wrong EEPROM Data
E94
Washer-dryer shows E94; cycles may behave abnormally or not complete.
Program Configuration Error
E95
Washer-dryer shows E95; control may freeze or reset unexpectedly.
Communication Error with EEPROM / Internal Control Fault
Symptom
Control knob or buttons on the washer-dryer are unresponsive or intermittent, but display is on.
User Interface Button / Encoder Fault
Symptom
Drying cycle runs but clothes remain damp or take very long to dry.
Poor Drying Performance
Symptom
Drying cycle stops quickly and clothes are still wet; machine may think clothes are dry.
Drying Moisture Detection / Sensor Fault
Symptom
Washer-dryer combo leaks water from the front, especially during wash or rinse, with no error code displayed.
Door Gasket Leakage
Symptom
Washer-dryer does not drain water at the end of the cycle, but no error code is shown; clothes are wet and water remains in drum.
Partial Drain Blockage
Symptom
Washer-dryer does not start at all, no lights or display, as if completely dead.
No Power / Supply Fault
Symptom
Washer-dryer door will not open at the end of the cycle, but no error code is displayed.
Door Stuck / Interlock Not Releasing
Symptom
Washer-dryer drum does not turn at all during wash or spin, but the machine fills and drains normally.
Drive Motor / Belt Failure
Symptom
Washer-dryer emits a burning smell or visible smoke during operation, with or without error codes.
Overheating Component / Electrical Burning
Symptom
Washer-dryer has a strong musty or mouldy odour inside the drum and on clothes.
Biofilm and Mould Build-Up
Symptom
Washer-dryer leaks water from the rear or underneath during wash or drain, with no error code.
Internal Hose or Pump Leakage
Symptom
Washer-dryer leaves clothes very wet at the end of the cycle, even though it appears to spin.
Poor Spin Performance / Unbalanced Load Handling
Symptom
Washer-dryer leaves detergent marks or white streaks on clothes after washing.
Poor Rinsing / Detergent Residue
Symptom
Washer-dryer makes very loud rumbling or roaring noises during spin, sometimes with vibration, no error code.
Drum Bearing Wear / Failure
Symptom
Washer-dryer produces loud banging or knocking during spin, machine may move across the floor.
Excessive Vibration / Suspension Fault
Symptom
Washer-dryer trips the household circuit breaker or RCD during operation.
Earth Leakage / Short Circuit
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E10 |
Washer-dryer does not fill with water or fills very slowly, cycle stops early with E10 on display.
|
Water Inlet Timeout / Fill Fault | View Details |
| E11 |
Washer-dryer attempts to fill but stops with E11, drum remains almost empty of water.
|
No Water Fill Detected | View Details |
| E13 |
Washer-dryer shows E13 and may stop mid-cycle; water may be detected in the base tray or under the machine.
|
Water Leakage Detected / Anti-Flood Activation | View Details |
| E20 |
Washer-dryer does not drain water, stops with E20, clothes remain wet and drum full or partially full of water.
|
Drain Pump / Drainage Fault | View Details |
| E21 |
Washer-dryer attempts to drain but stops with E21; pump may be noisy or jammed, water remains in drum.
|
Drain Pump Blocked or Jammed | View Details |
| E23 |
Washer-dryer shows E23, will not drain or start a cycle; you may hear no pump activity.
|
Drain Pump Triac / Pump Control Fault | View Details |
| E24 |
Washer-dryer displays E24, often after a drain-related issue; pump may run continuously or not at all.
|
Drain Pump Feedback / Control Error | View Details |
| E30 |
Washer-dryer shows E30 and may not start or may stop mid-cycle; sometimes accompanied by door lock issues.
|
Door Lock / Door Interlock Fault | View Details |
| E31 |
Washer-dryer shows E31, may overfill or underfill, and water levels appear incorrect.
|
Pressure Sensor Signal Fault | View Details |
| E32 |
Washer-dryer intermittently shows E32, may stop during fill or spin, water level seems inconsistent.
|
Pressure Sensor Calibration / Out-of-Range Signal | View Details |
| E33 |
Washer-dryer shows E33 and may have issues heating or controlling water level correctly.
|
Pressure System / Heater Safety Conflict | View Details |
| E34 |
Washer-dryer displays E34, often at the start of a cycle, and may not proceed to fill or heat.
|
Dual-Level Pressure Switch / Safety Level Error | View Details |
| E35 |
Washer-dryer overfills with water or shows E35, sometimes causing water to reach the door glass.
|
Overfill / Overpressure Fault | View Details |
| E38 |
Washer-dryer shows E38, often with incorrect water levels or poor rinsing performance.
|
Blocked Pressure Chamber / No Pressure Change Detected | View Details |
| E40 |
Washer-dryer will not start; E40 or a flashing door symbol appears, door may not lock.
|
Door Not Properly Closed / Door Lock Error | View Details |
| E41 |
Washer-dryer shows E41; door appears closed but machine reports it as open.
|
Door Open Signal Fault | View Details |
| E42 |
Washer-dryer shows E42 and may not unlock the door at the end of the cycle.
|
Door Unlock Fault | View Details |
| E43 |
Washer-dryer shows E43; door lock may click repeatedly or not engage at all.
|
Door Lock Triac / Control Fault | View Details |
| E44 |
Washer-dryer intermittently shows E44; door status seems inconsistent (machine thinks door is open/closed incorrectly).
|
Door Status Sensor Fault | View Details |
| E45 |
Washer-dryer shows E45; door lock and control board communication error.
|
Door Lock Control Circuit Fault | View Details |
| E50 |
Washer-dryer shows E50; drum may not turn or may stop suddenly during wash or spin.
|
General Motor / Drive Fault | View Details |
| E51 |
Washer-dryer shows E51; motor may not start, or there may be sparking or tripping of the breaker.
|
Motor Power Triac Short Circuit | View Details |
| E52 |
Washer-dryer shows E52; drum may spin erratically or not at all, speeds are incorrect.
|
Tachometer Signal Fault | View Details |
| E53 |
Washer-dryer shows E53; motor may not respond correctly to speed commands.
|
Motor Control Circuit Fault | View Details |
| E54 |
Washer-dryer shows E54; motor may start and stop abruptly or not reverse direction.
|
Motor Relay / Direction Control Fault | View Details |
| E60 |
Washer-dryer shows E60; drying or washing heating does not work properly.
|
General Heating System Fault | View Details |
| E61 |
Washer-dryer shows E61; water does not reach the set temperature during wash.
|
Wash Heating Time-Out | View Details |
| E62 |
Washer-dryer shows E62; water overheats during wash, possible very hot drum or steam.
|
Overheating During Wash | View Details |
| E63 |
Washer-dryer shows E63; drying cycle does not heat or stops early.
|
Dryer Heater Fault / Overheat Protection | View Details |
| E64 |
Washer-dryer shows E64; drying performance is poor or non-existent, but fan may run.
|
Dryer Heater Circuit Fault | View Details |
| E66 |
Washer-dryer shows E66; heating does not start or stops unexpectedly.
|
Heater Relay Fault | View Details |
| E70 |
Washer-dryer shows E70; temperature readings appear incorrect, cycles may be too hot or too cold.
|
General NTC Sensor Fault | View Details |
| E90 |
Washer-dryer shows E90; control panel may be unresponsive or display random symbols.
|
Communication Error Between User Interface and Main PCB | View Details |
| E91 |
Washer-dryer shows E91; display may be blank or show limited information.
|
No Communication with User Interface | View Details |
| E92 |
Washer-dryer shows E92; some buttons may not respond or wrong functions are triggered.
|
User Interface Configuration / Communication Error | View Details |
| E93 |
Washer-dryer shows E93; machine may not start any program.
|
Configuration Error / Wrong EEPROM Data | View Details |
| E94 |
Washer-dryer shows E94; cycles may behave abnormally or not complete.
|
Program Configuration Error | View Details |
| E95 |
Washer-dryer shows E95; control may freeze or reset unexpectedly.
|
Communication Error with EEPROM / Internal Control Fault | View Details |
| – |
Control knob or buttons on the washer-dryer are unresponsive or intermittent, but display is on.
|
User Interface Button / Encoder Fault | View Details |
| – |
Drying cycle runs but clothes remain damp or take very long to dry.
|
Poor Drying Performance | View Details |
| – |
Drying cycle stops quickly and clothes are still wet; machine may think clothes are dry.
|
Drying Moisture Detection / Sensor Fault | View Details |
| – |
Washer-dryer combo leaks water from the front, especially during wash or rinse, with no error code displayed.
|
Door Gasket Leakage | View Details |
| – |
Washer-dryer does not drain water at the end of the cycle, but no error code is shown; clothes are wet and water remains in drum.
|
Partial Drain Blockage | View Details |
| – |
Washer-dryer does not start at all, no lights or display, as if completely dead.
|
No Power / Supply Fault | View Details |
| – |
Washer-dryer door will not open at the end of the cycle, but no error code is displayed.
|
Door Stuck / Interlock Not Releasing | View Details |
| – |
Washer-dryer drum does not turn at all during wash or spin, but the machine fills and drains normally.
|
Drive Motor / Belt Failure | View Details |
| – |
Washer-dryer emits a burning smell or visible smoke during operation, with or without error codes.
|
Overheating Component / Electrical Burning | View Details |
| – |
Washer-dryer has a strong musty or mouldy odour inside the drum and on clothes.
|
Biofilm and Mould Build-Up | View Details |
| – |
Washer-dryer leaks water from the rear or underneath during wash or drain, with no error code.
|
Internal Hose or Pump Leakage | View Details |
| – |
Washer-dryer leaves clothes very wet at the end of the cycle, even though it appears to spin.
|
Poor Spin Performance / Unbalanced Load Handling | View Details |
| – |
Washer-dryer leaves detergent marks or white streaks on clothes after washing.
|
Poor Rinsing / Detergent Residue | View Details |
| – |
Washer-dryer makes very loud rumbling or roaring noises during spin, sometimes with vibration, no error code.
|
Drum Bearing Wear / Failure | View Details |
| – |
Washer-dryer produces loud banging or knocking during spin, machine may move across the floor.
|
Excessive Vibration / Suspension Fault | View Details |
| – |
Washer-dryer trips the household circuit breaker or RCD during operation.
|
Earth Leakage / Short Circuit | View Details |
No matching codes found
Advertisements