Blomberg Dryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dryer will not start; display shows E01 immediately after pressing Start.
Door Lock / Door Closed Detection Fault
E02
Dryer stops shortly after starting; display shows E02 and drum may not rotate.
Motor Start / Motor Drive Fault
E03
Dryer runs briefly then stops; display shows E03 and clothes remain wet.
NTC Temperature Sensor Fault (Exhaust or Drum Sensor)
E04
Dryer stops mid-cycle with E04; unit may feel very hot inside.
Overheating / High Temperature Cut-Out
E05
Dryer does not heat; cycle runs but clothes stay cold and E05 appears.
Heating Circuit Fault
E06
Dryer stops and displays E06; may occur early in the cycle, often on sensor-dry programs.
Moisture Sensor / Conductivity Sensor Fault
E07
Dryer displays E07 and may not start or may stop unexpectedly; some models show this as a pump-related error on condenser/heat pump units.
Condensate Pump / Water Level Fault (Condenser & Heat Pump Models)
E08
Dryer shows E08 and may not heat properly; often associated with heat pump system issues on heat pump models.
Heat Pump System Fault (Heat Pump Models Only)
E09
Dryer displays E09 and will not start or stops abruptly; often associated with power or control issues.
Main Control Board / Power Supply Fault
E10
Dryer shows E10 and may not start or may stop with no drum movement.
Drum Motor Tachometer / Speed Feedback Fault
E11
Dryer displays E11; may be associated with humidity or ambient temperature sensor issues on some models.
Ambient Temperature / Additional NTC Sensor Fault
E12
Dryer shows E12 and may stop or refuse to start; sometimes linked to communication between boards on advanced models.
Communication Error Between Control Modules
E13
Dryer displays E13; may be associated with airflow or fan issues on some Blomberg models.
Airflow / Fan Motor Fault
E14
Dryer shows E14 and may not heat or may shut down; often related to safety thermostat or thermal fuse on some models.
Safety Thermostat / Thermal Fuse Trip
E15
Dryer displays E15; may be associated with internal memory or configuration error on some Blomberg controls.
Control Board Configuration / EEPROM Error
Symptom
Dryer control panel buttons are unresponsive or some buttons do not work.
User Interface Keypad Failure
Symptom
Dryer display and lights work, but selected program will not start; Start button beeps but nothing happens.
User Interface / Program Lockout or Child Lock
Symptom
Dryer display shows unusually long remaining times or time jumps up and down during sensor cycles.
Sensor Dry Algorithm / Moisture and Temperature Feedback Issues
Symptom
Dryer door will not latch or pops open during the cycle.
Door Latch / Catch Misalignment
Symptom
Dryer door will not unlock at the end of the cycle; clothes are trapped inside.
Door Lock Mechanism Stuck
Symptom
Dryer drum does not turn, but you can hear a humming sound when Start is pressed.
Drive Belt Breakage or Seized Drum
Symptom
Dryer drum light does not turn on when the door is opened (on models with drum light).
Drum Light Circuit Failure
Symptom
Dryer drum turns but there is a loud roaring or whooshing airflow noise.
Air Duct Resonance / Fan or Duct Misalignment
Symptom
Dryer emits a grinding or scraping noise, especially at low speeds.
Drum Bearing / Front Felt Seal Failure
Symptom
Dryer has a musty or moldy odor inside the drum and on clothes.
Moisture Retention / Bacterial Growth in Drum or Condenser
Symptom
Dryer interior light and display flicker or dim when the heater turns on.
Voltage Drop / Weak Supply or Loose Connections
Symptom
Dryer leaks water onto the floor during or after a cycle (condenser and heat pump models).
Condensate Drainage / Water Tank Leak
Symptom
Dryer leaves black or brown marks on clothes.
Drum Seal Contamination or Bearing Grease Transfer
Symptom
Dryer makes a loud thumping or banging noise as the drum turns.
Out-of-Round Drum or Worn Drum Rollers
Symptom
Dryer makes a rattling or clinking noise, especially with certain loads.
Foreign Objects in Drum or Fan Housing
Symptom
Dryer occasionally trips the household circuit breaker or blows a fuse during operation.
Electrical Overload or Short Circuit
Symptom
Dryer produces a burning smell during operation.
Lint Accumulation on Heater or Motor Overheating
Symptom
Dryer produces a loud squealing or screeching noise during operation.
Drum Support Roller / Idler Pulley Wear
Symptom
Dryer runs but does not heat; clothes remain cold and damp at the end of the cycle, no error code displayed.
Heating Element or Thermal Fuse Failure
Symptom
Dryer stops mid-cycle and will not restart until it cools down; cabinet feels very hot.
Overheating / Motor or Thermostat Overload Trip
Symptom
Dryer stops with clothes still damp when using automatic (sensor) programs, but works better on timed cycles.
Moisture Sensor Performance Degradation
Symptom
Dryer takes too long to dry clothes; loads are still damp after a full cycle, but some heat is present.
Restricted Airflow / Partial Heating Performance
Symptom
Dryer vibrates excessively or moves across the floor during operation.
Cabinet Vibration / Drum Imbalance
Symptom
Dryer will not power on; no lights or display, completely dead.
Main Power Supply / Control Power Fault
Symptom
Dryer will not start at all; no drum movement, but control panel lights up.
Start Circuit / Door Interlock / Control Relay Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dryer will not start; display shows E01 immediately after pressing Start.
|
Door Lock / Door Closed Detection Fault | View Details |
| E02 |
Dryer stops shortly after starting; display shows E02 and drum may not rotate.
|
Motor Start / Motor Drive Fault | View Details |
| E03 |
Dryer runs briefly then stops; display shows E03 and clothes remain wet.
|
NTC Temperature Sensor Fault (Exhaust or Drum Sensor) | View Details |
| E04 |
Dryer stops mid-cycle with E04; unit may feel very hot inside.
|
Overheating / High Temperature Cut-Out | View Details |
| E05 |
Dryer does not heat; cycle runs but clothes stay cold and E05 appears.
|
Heating Circuit Fault | View Details |
| E06 |
Dryer stops and displays E06; may occur early in the cycle, often on sensor-dry programs.
|
Moisture Sensor / Conductivity Sensor Fault | View Details |
| E07 |
Dryer displays E07 and may not start or may stop unexpectedly; some models show this as a pump-related error on condenser/heat pump units.
|
Condensate Pump / Water Level Fault (Condenser & Heat Pump Models) | View Details |
| E08 |
Dryer shows E08 and may not heat properly; often associated with heat pump system issues on heat pump models.
|
Heat Pump System Fault (Heat Pump Models Only) | View Details |
| E09 |
Dryer displays E09 and will not start or stops abruptly; often associated with power or control issues.
|
Main Control Board / Power Supply Fault | View Details |
| E10 |
Dryer shows E10 and may not start or may stop with no drum movement.
|
Drum Motor Tachometer / Speed Feedback Fault | View Details |
| E11 |
Dryer displays E11; may be associated with humidity or ambient temperature sensor issues on some models.
|
Ambient Temperature / Additional NTC Sensor Fault | View Details |
| E12 |
Dryer shows E12 and may stop or refuse to start; sometimes linked to communication between boards on advanced models.
|
Communication Error Between Control Modules | View Details |
| E13 |
Dryer displays E13; may be associated with airflow or fan issues on some Blomberg models.
|
Airflow / Fan Motor Fault | View Details |
| E14 |
Dryer shows E14 and may not heat or may shut down; often related to safety thermostat or thermal fuse on some models.
|
Safety Thermostat / Thermal Fuse Trip | View Details |
| E15 |
Dryer displays E15; may be associated with internal memory or configuration error on some Blomberg controls.
|
Control Board Configuration / EEPROM Error | View Details |
| – |
Dryer control panel buttons are unresponsive or some buttons do not work.
|
User Interface Keypad Failure | View Details |
| – |
Dryer display and lights work, but selected program will not start; Start button beeps but nothing happens.
|
User Interface / Program Lockout or Child Lock | View Details |
| – |
Dryer display shows unusually long remaining times or time jumps up and down during sensor cycles.
|
Sensor Dry Algorithm / Moisture and Temperature Feedback Issues | View Details |
| – |
Dryer door will not latch or pops open during the cycle.
|
Door Latch / Catch Misalignment | View Details |
| – |
Dryer door will not unlock at the end of the cycle; clothes are trapped inside.
|
Door Lock Mechanism Stuck | View Details |
| – |
Dryer drum does not turn, but you can hear a humming sound when Start is pressed.
|
Drive Belt Breakage or Seized Drum | View Details |
| – |
Dryer drum light does not turn on when the door is opened (on models with drum light).
|
Drum Light Circuit Failure | View Details |
| – |
Dryer drum turns but there is a loud roaring or whooshing airflow noise.
|
Air Duct Resonance / Fan or Duct Misalignment | View Details |
| – |
Dryer emits a grinding or scraping noise, especially at low speeds.
|
Drum Bearing / Front Felt Seal Failure | View Details |
| – |
Dryer has a musty or moldy odor inside the drum and on clothes.
|
Moisture Retention / Bacterial Growth in Drum or Condenser | View Details |
| – |
Dryer interior light and display flicker or dim when the heater turns on.
|
Voltage Drop / Weak Supply or Loose Connections | View Details |
| – |
Dryer leaks water onto the floor during or after a cycle (condenser and heat pump models).
|
Condensate Drainage / Water Tank Leak | View Details |
| – |
Dryer leaves black or brown marks on clothes.
|
Drum Seal Contamination or Bearing Grease Transfer | View Details |
| – |
Dryer makes a loud thumping or banging noise as the drum turns.
|
Out-of-Round Drum or Worn Drum Rollers | View Details |
| – |
Dryer makes a rattling or clinking noise, especially with certain loads.
|
Foreign Objects in Drum or Fan Housing | View Details |
| – |
Dryer occasionally trips the household circuit breaker or blows a fuse during operation.
|
Electrical Overload or Short Circuit | View Details |
| – |
Dryer produces a burning smell during operation.
|
Lint Accumulation on Heater or Motor Overheating | View Details |
| – |
Dryer produces a loud squealing or screeching noise during operation.
|
Drum Support Roller / Idler Pulley Wear | View Details |
| – |
Dryer runs but does not heat; clothes remain cold and damp at the end of the cycle, no error code displayed.
|
Heating Element or Thermal Fuse Failure | View Details |
| – |
Dryer stops mid-cycle and will not restart until it cools down; cabinet feels very hot.
|
Overheating / Motor or Thermostat Overload Trip | View Details |
| – |
Dryer stops with clothes still damp when using automatic (sensor) programs, but works better on timed cycles.
|
Moisture Sensor Performance Degradation | View Details |
| – |
Dryer takes too long to dry clothes; loads are still damp after a full cycle, but some heat is present.
|
Restricted Airflow / Partial Heating Performance | View Details |
| – |
Dryer vibrates excessively or moves across the floor during operation.
|
Cabinet Vibration / Drum Imbalance | View Details |
| – |
Dryer will not power on; no lights or display, completely dead.
|
Main Power Supply / Control Power Fault | View Details |
| – |
Dryer will not start at all; no drum movement, but control panel lights up.
|
Start Circuit / Door Interlock / Control Relay Fault | View Details |
No matching codes found
Advertisements