Premier
Premier Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
door
Display shows "door" or a flashing door icon and oven will not start, especially for self-clean cycles.
Door Switch or Lock Position Not Detected
F0
Display shows F0 and oven may not respond to keypad inputs or may beep intermittently.
General EOC / Keypad Communication Error
F1
Electronic oven control beeps continuously, display shows F1 and oven functions are disabled or behave erratically.
Electronic Oven Control Keypad or Control Board Failure
F2
Oven overheats, may scorch food, and the display shows F2. Sometimes accompanied by a continuous beep until power is cut.
Runaway Oven Temperature / Over-Temperature Condition
F3
Oven will not heat properly or shuts off; display shows F3 indicating a temperature sensor circuit problem.
Oven Temperature Sensor Circuit Open
F4
Oven may not heat correctly; display shows F4 indicating a shorted temperature sensor circuit.
Oven Temperature Sensor Circuit Shorted
F5
Display shows F5 and oven functions may be disabled or intermittent.
EOC Relay or Watchdog Failure
F7
Display shows F7, often accompanied by beeping and unresponsive or erratic keypad operation.
Stuck or Shorted Keypad
F8
Display shows F8 and oven may not start or may shut off unexpectedly.
EOC Logic or EEPROM Error
F9
Display shows F9 and oven door may not lock or unlock during self-clean, or self-clean will not start.
Door Lock Circuit Failure
LOC
Display shows LOC or a lock icon; oven controls do not respond and oven will not start a bake cycle.
Control Panel Child Lock / Control Lock Activated
PF
Display shows PF and clock resets after a power interruption; oven may not resume previous cycle.
Power Failure Indication
SAb
Display shows SAb or Sabbath mode; oven appears unresponsive to normal commands.
Sabbath Mode Activated
Symptom
Clock and display are blank, but surface burners may still work (gas models).
No Power to Control Board
Symptom
Control panel buttons are unresponsive or respond intermittently; no error code displayed.
Keypad / Touchpad Failure
Symptom
Digital display is very dim or segments are missing, but oven still operates.
Weak or Failing Display Module
Symptom
Gas Premier oven broiler will not ignite, but bake works normally.
Broil Ignition System Failure
Symptom
Gas Premier oven will not ignite on bake; you hear clicking or see the igniter glow weakly or not at all.
Ignition System Failure (Bake)
Symptom
Oven broil function does not heat, but bake works normally.
Open Broil Element or Broil Circuit Failure
Symptom
Oven cavity is not evenly heating; one side of food burns while the other is undercooked.
Uneven Heat Distribution
Symptom
Oven cycles on and off very frequently, causing noticeable temperature swings.
Short Cycling of Heating Elements
Symptom
Oven door glass is cracked or shattered, but the oven still heats.
Damaged Oven Door Glass Panel
Symptom
Oven door will not close fully or pops open slightly during operation.
Door Hinge or Latch Misalignment
Symptom
Oven door will not open after a self-clean cycle has completed and the oven has cooled.
Door Lock Mechanism Stuck Closed
Symptom
Oven emits a burning plastic or electrical smell when in use.
Overheating Wiring or New Appliance Odor
Symptom
Oven emits a strong gas smell before or during operation (gas Premier oven).
Gas Leak or Incomplete Ignition
Symptom
Oven interior light stays on even when the door is closed.
Stuck or Shorted Door Switch
Symptom
Oven light does not turn on when the door is opened or when the light button is pressed.
Oven Cavity Light Circuit Failure
Symptom
Oven makes loud popping, banging, or metallic noises during heating or cooling.
Thermal Expansion Noise or Loose Panels
Symptom
Oven preheat takes excessively long or never reaches the set temperature.
Insufficient Heating / Partial Element Failure
Symptom
Oven produces excessive smoke during normal baking (not self-clean).
Combustion of Residue or Spills
Symptom
Oven shuts off by itself before the set time or temperature is reached.
Overheating Protection or Control Fault
Symptom
Oven temperature is consistently too hot or too cold compared to the set temperature (e.g., set to 350°F but measures 300°F).
Oven Temperature Calibration Error
Symptom
Oven will not heat at all on bake, but stovetop burners work normally (electric Premier range).
Open Bake Element or Bake Circuit Failure
Symptom
Self-clean cycle will not start; oven beeps and may display a brief message but no code.
Self-Clean Lock or Temperature Preconditions Not Met
Symptom
Storage drawer under the oven becomes extremely hot during baking.
Excessive Heat Transfer to Storage Drawer
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| door |
Display shows "door" or a flashing door icon and oven will not start, especially for self-clean cycles.
|
Door Switch or Lock Position Not Detected | View Details |
| F0 |
Display shows F0 and oven may not respond to keypad inputs or may beep intermittently.
|
General EOC / Keypad Communication Error | View Details |
| F1 |
Electronic oven control beeps continuously, display shows F1 and oven functions are disabled or behave erratically.
|
Electronic Oven Control Keypad or Control Board Failure | View Details |
| F2 |
Oven overheats, may scorch food, and the display shows F2. Sometimes accompanied by a continuous beep until power is cut.
|
Runaway Oven Temperature / Over-Temperature Condition | View Details |
| F3 |
Oven will not heat properly or shuts off; display shows F3 indicating a temperature sensor circuit problem.
|
Oven Temperature Sensor Circuit Open | View Details |
| F4 |
Oven may not heat correctly; display shows F4 indicating a shorted temperature sensor circuit.
|
Oven Temperature Sensor Circuit Shorted | View Details |
| F5 |
Display shows F5 and oven functions may be disabled or intermittent.
|
EOC Relay or Watchdog Failure | View Details |
| F7 |
Display shows F7, often accompanied by beeping and unresponsive or erratic keypad operation.
|
Stuck or Shorted Keypad | View Details |
| F8 |
Display shows F8 and oven may not start or may shut off unexpectedly.
|
EOC Logic or EEPROM Error | View Details |
| F9 |
Display shows F9 and oven door may not lock or unlock during self-clean, or self-clean will not start.
|
Door Lock Circuit Failure | View Details |
| LOC |
Display shows LOC or a lock icon; oven controls do not respond and oven will not start a bake cycle.
|
Control Panel Child Lock / Control Lock Activated | View Details |
| PF |
Display shows PF and clock resets after a power interruption; oven may not resume previous cycle.
|
Power Failure Indication | View Details |
| SAb |
Display shows SAb or Sabbath mode; oven appears unresponsive to normal commands.
|
Sabbath Mode Activated | View Details |
| – |
Clock and display are blank, but surface burners may still work (gas models).
|
No Power to Control Board | View Details |
| – |
Control panel buttons are unresponsive or respond intermittently; no error code displayed.
|
Keypad / Touchpad Failure | View Details |
| – |
Digital display is very dim or segments are missing, but oven still operates.
|
Weak or Failing Display Module | View Details |
| – |
Gas Premier oven broiler will not ignite, but bake works normally.
|
Broil Ignition System Failure | View Details |
| – |
Gas Premier oven will not ignite on bake; you hear clicking or see the igniter glow weakly or not at all.
|
Ignition System Failure (Bake) | View Details |
| – |
Oven broil function does not heat, but bake works normally.
|
Open Broil Element or Broil Circuit Failure | View Details |
| – |
Oven cavity is not evenly heating; one side of food burns while the other is undercooked.
|
Uneven Heat Distribution | View Details |
| – |
Oven cycles on and off very frequently, causing noticeable temperature swings.
|
Short Cycling of Heating Elements | View Details |
| – |
Oven door glass is cracked or shattered, but the oven still heats.
|
Damaged Oven Door Glass Panel | View Details |
| – |
Oven door will not close fully or pops open slightly during operation.
|
Door Hinge or Latch Misalignment | View Details |
| – |
Oven door will not open after a self-clean cycle has completed and the oven has cooled.
|
Door Lock Mechanism Stuck Closed | View Details |
| – |
Oven emits a burning plastic or electrical smell when in use.
|
Overheating Wiring or New Appliance Odor | View Details |
| – |
Oven emits a strong gas smell before or during operation (gas Premier oven).
|
Gas Leak or Incomplete Ignition | View Details |
| – |
Oven interior light stays on even when the door is closed.
|
Stuck or Shorted Door Switch | View Details |
| – |
Oven light does not turn on when the door is opened or when the light button is pressed.
|
Oven Cavity Light Circuit Failure | View Details |
| – |
Oven makes loud popping, banging, or metallic noises during heating or cooling.
|
Thermal Expansion Noise or Loose Panels | View Details |
| – |
Oven preheat takes excessively long or never reaches the set temperature.
|
Insufficient Heating / Partial Element Failure | View Details |
| – |
Oven produces excessive smoke during normal baking (not self-clean).
|
Combustion of Residue or Spills | View Details |
| – |
Oven shuts off by itself before the set time or temperature is reached.
|
Overheating Protection or Control Fault | View Details |
| – |
Oven temperature is consistently too hot or too cold compared to the set temperature (e.g., set to 350°F but measures 300°F).
|
Oven Temperature Calibration Error | View Details |
| – |
Oven will not heat at all on bake, but stovetop burners work normally (electric Premier range).
|
Open Bake Element or Bake Circuit Failure | View Details |
| – |
Self-clean cycle will not start; oven beeps and may display a brief message but no code.
|
Self-Clean Lock or Temperature Preconditions Not Met | View Details |
| – |
Storage drawer under the oven becomes extremely hot during baking.
|
Excessive Heat Transfer to Storage Drawer | View Details |
No matching codes found
Advertisements