Salter
Salter Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Digital Salter oven will not start; display shows E0 immediately when power is applied.
Control Panel Communication Fault
E1
Salter digital oven displays E1 and will not heat; fan and light may still operate.
Oven Cavity Temperature Sensor Open Circuit
E10
Salter oven shows E10 and the fan runs but the oven does not reach set temperature or stops heating mid‑cycle.
Overheat Thermostat / Thermal Cut‑Out Open
E11
Salter oven displays E11 and the grill function is disabled while other functions may still work.
Grill Element Circuit Fault
E12
Salter oven shows E12 and the fan‑assisted cooking mode does not heat, while conventional mode may still work.
Fan Oven Element Circuit Fault
E13
Salter oven displays E13 and the lower heating function does not work; top and grill may still heat.
Bottom Oven Element Circuit Fault
E14
Salter oven shows E14 and the internal light does not work, though heating functions may be normal.
Oven Lamp Circuit Fault
E15
Salter oven displays E15 and the timer/clock cannot be set; oven will not start any cooking program.
Clock / Timer Module Fault
E16
Salter oven shows E16 and the fan runs at incorrect speed or is very noisy; some modes may shut down.
Convection Fan Motor Fault
E17
Salter oven displays E17 and immediately shuts down heating when a high temperature is selected.
High Temperature Calibration / Sensor Range Error
E18
Salter oven shows E18 and beeps continuously; no cooking functions can be selected.
Stuck Key / Continuous Input Detected
E19
Salter oven displays E19 and the display is dim or partially missing segments.
Display Module / LED Driver Fault
E2
Salter oven shows E2 and may overheat or shut down shortly after starting.
Oven Cavity Temperature Sensor Short Circuit
E20
Salter oven shows E20 and trips the household circuit breaker when heating is selected.
Earth Leakage / Short to Ground
E3
Salter oven displays E3 and heating is disabled; fan and clock may still function.
Oven Overtemperature Protection Trip / High Temperature Detected
E4
Salter oven shows E4 and will not heat; sometimes appears after a power surge or lightning storm.
Mains Voltage Out of Range / Power Supply Error
E5
Salter oven displays E5 and the fan runs but no heat is produced from any element.
Heating Circuit Relay or Triac Failure
E6
Salter oven shows E6 and the display or touch buttons behave erratically or are unresponsive.
Touch Control Panel / Keypad Fault
E7
Salter oven displays E7 and the fan runs continuously even when the oven is off.
Cooling Fan Feedback / Tachometer Error
E8
Salter oven shows E8 and the internal light and display may flicker or cut out intermittently.
Low Voltage / Internal Power Supply Fault
E9
Salter oven displays E9 and beeps; door lock symbol may flash and the door may remain locked.
Door Lock Mechanism / Self‑Clean Lock Fault
Symptom
Grill does not work; oven functions are normal.
Grill Heating Failure
Symptom
Oven cavity light flickers or goes off when the door is opened or closed.
Intermittent Door Switch or Lamp Connection
Symptom
Oven clock loses time or resets to 00:00 after each use or power fluctuation.
Timer Power Retention / Backup Fault
Symptom
Oven display is completely dead; no lights or response, but mains supply to the kitchen circuit is present.
No Power to Control / Dead Control Board
Symptom
Oven does not heat at all in any mode; display and light work but cavity remains cold.
Total Heating Failure
Symptom
Oven door does not seal; visible gaps around the edges and heat felt escaping.
Door Gasket / Seal Failure
Symptom
Oven door glass is loose, rattling, or has condensation between the panes.
Door Glass Assembly / Seal Failure
Symptom
Oven door will not close fully; heat escapes and cooking is uneven.
Door Hinge / Door Alignment Fault
Symptom
Oven emits a strong burning smell or smoke during normal cooking (not first‑time use).
Grease Build‑Up / Component Overheating
Symptom
Oven fan runs but there is no heat in fan‑assisted mode; other modes may work.
Fan Element Open Circuit
Symptom
Oven heats but does not reach the set temperature or takes excessively long to cook food.
Underheating / Temperature Inaccuracy
Symptom
Oven interior light and fan work, but elements cycle on and off very rapidly, causing unstable temperature.
Thermostat Cycling / Sensor Noise
Symptom
Oven interior light stays on permanently and does not switch off when the door is closed.
Door Switch / Lamp Control Fault
Symptom
Oven light works but fan and heating do not start when a function is selected.
Function Selector Switch Failure
Symptom
Oven makes loud rattling or scraping noises when the fan is running.
Fan Blade Obstruction or Motor Bearing Wear
Symptom
Oven overheats and burns food even at low temperature settings.
Overheating / Thermostat Stuck Closed
Symptom
Oven trips the RCD or fuse when a specific function (e.g., grill or fan) is selected.
Function‑Specific Short Circuit
Symptom
Oven will not start; display is on but buttons do not respond or only beep.
Control Lock / Child Lock Activated or Control Panel Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Digital Salter oven will not start; display shows E0 immediately when power is applied.
|
Control Panel Communication Fault | View Details |
| E1 |
Salter digital oven displays E1 and will not heat; fan and light may still operate.
|
Oven Cavity Temperature Sensor Open Circuit | View Details |
| E10 |
Salter oven shows E10 and the fan runs but the oven does not reach set temperature or stops heating mid‑cycle.
|
Overheat Thermostat / Thermal Cut‑Out Open | View Details |
| E11 |
Salter oven displays E11 and the grill function is disabled while other functions may still work.
|
Grill Element Circuit Fault | View Details |
| E12 |
Salter oven shows E12 and the fan‑assisted cooking mode does not heat, while conventional mode may still work.
|
Fan Oven Element Circuit Fault | View Details |
| E13 |
Salter oven displays E13 and the lower heating function does not work; top and grill may still heat.
|
Bottom Oven Element Circuit Fault | View Details |
| E14 |
Salter oven shows E14 and the internal light does not work, though heating functions may be normal.
|
Oven Lamp Circuit Fault | View Details |
| E15 |
Salter oven displays E15 and the timer/clock cannot be set; oven will not start any cooking program.
|
Clock / Timer Module Fault | View Details |
| E16 |
Salter oven shows E16 and the fan runs at incorrect speed or is very noisy; some modes may shut down.
|
Convection Fan Motor Fault | View Details |
| E17 |
Salter oven displays E17 and immediately shuts down heating when a high temperature is selected.
|
High Temperature Calibration / Sensor Range Error | View Details |
| E18 |
Salter oven shows E18 and beeps continuously; no cooking functions can be selected.
|
Stuck Key / Continuous Input Detected | View Details |
| E19 |
Salter oven displays E19 and the display is dim or partially missing segments.
|
Display Module / LED Driver Fault | View Details |
| E2 |
Salter oven shows E2 and may overheat or shut down shortly after starting.
|
Oven Cavity Temperature Sensor Short Circuit | View Details |
| E20 |
Salter oven shows E20 and trips the household circuit breaker when heating is selected.
|
Earth Leakage / Short to Ground | View Details |
| E3 |
Salter oven displays E3 and heating is disabled; fan and clock may still function.
|
Oven Overtemperature Protection Trip / High Temperature Detected | View Details |
| E4 |
Salter oven shows E4 and will not heat; sometimes appears after a power surge or lightning storm.
|
Mains Voltage Out of Range / Power Supply Error | View Details |
| E5 |
Salter oven displays E5 and the fan runs but no heat is produced from any element.
|
Heating Circuit Relay or Triac Failure | View Details |
| E6 |
Salter oven shows E6 and the display or touch buttons behave erratically or are unresponsive.
|
Touch Control Panel / Keypad Fault | View Details |
| E7 |
Salter oven displays E7 and the fan runs continuously even when the oven is off.
|
Cooling Fan Feedback / Tachometer Error | View Details |
| E8 |
Salter oven shows E8 and the internal light and display may flicker or cut out intermittently.
|
Low Voltage / Internal Power Supply Fault | View Details |
| E9 |
Salter oven displays E9 and beeps; door lock symbol may flash and the door may remain locked.
|
Door Lock Mechanism / Self‑Clean Lock Fault | View Details |
| – |
Grill does not work; oven functions are normal.
|
Grill Heating Failure | View Details |
| – |
Oven cavity light flickers or goes off when the door is opened or closed.
|
Intermittent Door Switch or Lamp Connection | View Details |
| – |
Oven clock loses time or resets to 00:00 after each use or power fluctuation.
|
Timer Power Retention / Backup Fault | View Details |
| – |
Oven display is completely dead; no lights or response, but mains supply to the kitchen circuit is present.
|
No Power to Control / Dead Control Board | View Details |
| – |
Oven does not heat at all in any mode; display and light work but cavity remains cold.
|
Total Heating Failure | View Details |
| – |
Oven door does not seal; visible gaps around the edges and heat felt escaping.
|
Door Gasket / Seal Failure | View Details |
| – |
Oven door glass is loose, rattling, or has condensation between the panes.
|
Door Glass Assembly / Seal Failure | View Details |
| – |
Oven door will not close fully; heat escapes and cooking is uneven.
|
Door Hinge / Door Alignment Fault | View Details |
| – |
Oven emits a strong burning smell or smoke during normal cooking (not first‑time use).
|
Grease Build‑Up / Component Overheating | View Details |
| – |
Oven fan runs but there is no heat in fan‑assisted mode; other modes may work.
|
Fan Element Open Circuit | View Details |
| – |
Oven heats but does not reach the set temperature or takes excessively long to cook food.
|
Underheating / Temperature Inaccuracy | View Details |
| – |
Oven interior light and fan work, but elements cycle on and off very rapidly, causing unstable temperature.
|
Thermostat Cycling / Sensor Noise | View Details |
| – |
Oven interior light stays on permanently and does not switch off when the door is closed.
|
Door Switch / Lamp Control Fault | View Details |
| – |
Oven light works but fan and heating do not start when a function is selected.
|
Function Selector Switch Failure | View Details |
| – |
Oven makes loud rattling or scraping noises when the fan is running.
|
Fan Blade Obstruction or Motor Bearing Wear | View Details |
| – |
Oven overheats and burns food even at low temperature settings.
|
Overheating / Thermostat Stuck Closed | View Details |
| – |
Oven trips the RCD or fuse when a specific function (e.g., grill or fan) is selected.
|
Function‑Specific Short Circuit | View Details |
| – |
Oven will not start; display is on but buttons do not respond or only beep.
|
Control Lock / Child Lock Activated or Control Panel Fault | View Details |
No matching codes found
Advertisements