Hoover Washing Machines Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Washer will not start cycle and door will not lock; E01 displayed on Hoover washing machine.
Door Lock Circuit Failure
E02
Hoover washing machine does not fill with water or fills very slowly; E02 displayed.
Water Inlet Timeout / Fill Fault
E03
Hoover washer will not drain water; cycle stops with water in drum and E03 displayed.
Drain Pump Timeout / Drainage Fault
E04
Hoover washing machine overfills or shows E04 shortly after starting fill; may attempt to drain immediately.
Overfill / Water Level Sensor Fault
E05
Hoover washer stops during wash or rinse with E05; often related to heating or temperature sensing.
NTC Temperature Sensor / Heating Circuit Fault
E06
Hoover washing machine displays E06 and may not spin or may stop mid-cycle.
Motor Tachometer / Speed Sensor Fault
E07
Hoover washer shows E07 and may not spin or may stop with drum jammed or noisy.
Motor Jam / Drum Lock Detected
E08
Hoover washing machine displays E08 and will not spin properly or at all.
Motor Control / Triac Fault
E09
Hoover washer shows E09 and will not run motor; often appears on models with inverter or brushless motors.
Inverter Motor / Power Module Fault
E10
Hoover washing machine displays E10 and may not start or may stop shortly after starting.
Communication Error Between Display Board and Main PCB
E11
Hoover washer shows E11 and may not lock door or start cycle.
Door Lock Feedback Signal Error
E12
Hoover washer displays E12, often during heating or wash phase.
Heating Relay / Triac Control Error
E13
Hoover washing machine shows E13, often associated with water leakage or safety cut-out.
Anti-Flood / Leak Detection Fault
E16
Hoover washer displays E16 and may not start or may stop unexpectedly.
Water Level / Overflow Protection Error
E17
Hoover washing machine shows E17, often related to door or safety interlock issues.
Door Open Detected During Cycle
E18
Hoover washer displays E18 and may not drain or may stop mid-cycle.
Drainage / Pump Feedback Error
E20
Hoover washing machine shows E20 and may not spin or may stop with clothes wet.
Unbalanced Load / Spin Protection Fault
E21
Hoover washer displays E21 and may not spin or may stop during spin ramp-up.
Motor Overload / Stall Detection
E22
Hoover washing machine shows E22, often at the start of a cycle.
Configuration / EEPROM Error
E23
Hoover washer displays E23 and may not drain or may stop mid-cycle.
Drain Pump Triac / Control Error
E24
Hoover washing machine shows E24, often related to heating or motor control overlap.
Triac Short / Multiple Load Activation Error
E25
Hoover washer displays E25 and may not heat or may stop mid-cycle.
NTC Sensor Short / Out-of-Range Error
E26
Hoover washing machine shows E26, often at the start of heating.
NTC Sensor Open / Disconnected Error
E30
Hoover washer displays E30 and may not start or may stop unexpectedly.
General Safety / System Error
Symptom
Hoover washing machine cycle times are very long or the machine appears to be stuck on one part of the cycle.
Program Stalling / Sensor Feedback Issue
Symptom
Hoover washing machine dispenser drawer overflows or water leaks from the front of the drawer.
Detergent Drawer / Dispenser Blockage
Symptom
Hoover washing machine displays lights or LEDs flashing in a pattern but no alphanumeric code; machine will not start.
LED Flash Diagnostic / Control Fault
Symptom
Hoover washing machine does not drain water; clothes remain soaked at end of cycle, but no error code is shown.
Partial Drain Blockage
Symptom
Hoover washing machine does not heat water; cycles complete but clothes are cold and detergent may not dissolve fully.
No Heating
Symptom
Hoover washing machine door will not lock at the start of a cycle; clicking noise but no start, no code.
Mechanical Door Latch Misalignment
Symptom
Hoover washing machine door will not open at the end of the cycle; no error code displayed.
Door Lock Stuck Closed
Symptom
Hoover washing machine drum does not turn at all during wash or spin, but the machine fills and drains normally.
Drive System Failure
Symptom
Hoover washing machine emits a burning smell or visible smoke during operation.
Overheating Electrical Component
Symptom
Hoover washing machine has a strong mouldy or musty smell inside the drum and on clothes.
Biofilm and Detergent Residue Build-Up
Symptom
Hoover washing machine is leaking water from the front door area during wash or spin.
Door Seal (Gasket) Leak
Symptom
Hoover washing machine leaks water from underneath the cabinet during operation.
Internal Hose or Tub Leak
Symptom
Hoover washing machine leaves clothes very wet; spins but at low speed or stops spin early.
Spin Inefficiency / Unbalance Control
Symptom
Hoover washing machine makes a scraping or metallic rubbing noise when the drum turns.
Foreign Object Between Drum and Tub
Symptom
Hoover washing machine makes very loud rumbling or grinding noise during spin.
Drum Bearing Failure
Symptom
Hoover washing machine powers on but will not start a cycle; start button unresponsive or beeps.
User Interface / Control Lock Issue
Symptom
Hoover washing machine produces loud banging or knocking during spin, especially with heavy loads.
Excessive Vibration / Suspension Fault
Symptom
Hoover washing machine stops mid-cycle and trips the household circuit breaker or RCD.
Electrical Short or Earth Leakage
Symptom
Hoover washing machine will not start at all; no lights or display when power button is pressed.
No Power / Dead Appliance
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Washer will not start cycle and door will not lock; E01 displayed on Hoover washing machine.
|
Door Lock Circuit Failure | View Details |
| E02 |
Hoover washing machine does not fill with water or fills very slowly; E02 displayed.
|
Water Inlet Timeout / Fill Fault | View Details |
| E03 |
Hoover washer will not drain water; cycle stops with water in drum and E03 displayed.
|
Drain Pump Timeout / Drainage Fault | View Details |
| E04 |
Hoover washing machine overfills or shows E04 shortly after starting fill; may attempt to drain immediately.
|
Overfill / Water Level Sensor Fault | View Details |
| E05 |
Hoover washer stops during wash or rinse with E05; often related to heating or temperature sensing.
|
NTC Temperature Sensor / Heating Circuit Fault | View Details |
| E06 |
Hoover washing machine displays E06 and may not spin or may stop mid-cycle.
|
Motor Tachometer / Speed Sensor Fault | View Details |
| E07 |
Hoover washer shows E07 and may not spin or may stop with drum jammed or noisy.
|
Motor Jam / Drum Lock Detected | View Details |
| E08 |
Hoover washing machine displays E08 and will not spin properly or at all.
|
Motor Control / Triac Fault | View Details |
| E09 |
Hoover washer shows E09 and will not run motor; often appears on models with inverter or brushless motors.
|
Inverter Motor / Power Module Fault | View Details |
| E10 |
Hoover washing machine displays E10 and may not start or may stop shortly after starting.
|
Communication Error Between Display Board and Main PCB | View Details |
| E11 |
Hoover washer shows E11 and may not lock door or start cycle.
|
Door Lock Feedback Signal Error | View Details |
| E12 |
Hoover washer displays E12, often during heating or wash phase.
|
Heating Relay / Triac Control Error | View Details |
| E13 |
Hoover washing machine shows E13, often associated with water leakage or safety cut-out.
|
Anti-Flood / Leak Detection Fault | View Details |
| E16 |
Hoover washer displays E16 and may not start or may stop unexpectedly.
|
Water Level / Overflow Protection Error | View Details |
| E17 |
Hoover washing machine shows E17, often related to door or safety interlock issues.
|
Door Open Detected During Cycle | View Details |
| E18 |
Hoover washer displays E18 and may not drain or may stop mid-cycle.
|
Drainage / Pump Feedback Error | View Details |
| E20 |
Hoover washing machine shows E20 and may not spin or may stop with clothes wet.
|
Unbalanced Load / Spin Protection Fault | View Details |
| E21 |
Hoover washer displays E21 and may not spin or may stop during spin ramp-up.
|
Motor Overload / Stall Detection | View Details |
| E22 |
Hoover washing machine shows E22, often at the start of a cycle.
|
Configuration / EEPROM Error | View Details |
| E23 |
Hoover washer displays E23 and may not drain or may stop mid-cycle.
|
Drain Pump Triac / Control Error | View Details |
| E24 |
Hoover washing machine shows E24, often related to heating or motor control overlap.
|
Triac Short / Multiple Load Activation Error | View Details |
| E25 |
Hoover washer displays E25 and may not heat or may stop mid-cycle.
|
NTC Sensor Short / Out-of-Range Error | View Details |
| E26 |
Hoover washing machine shows E26, often at the start of heating.
|
NTC Sensor Open / Disconnected Error | View Details |
| E30 |
Hoover washer displays E30 and may not start or may stop unexpectedly.
|
General Safety / System Error | View Details |
| – |
Hoover washing machine cycle times are very long or the machine appears to be stuck on one part of the cycle.
|
Program Stalling / Sensor Feedback Issue | View Details |
| – |
Hoover washing machine dispenser drawer overflows or water leaks from the front of the drawer.
|
Detergent Drawer / Dispenser Blockage | View Details |
| – |
Hoover washing machine displays lights or LEDs flashing in a pattern but no alphanumeric code; machine will not start.
|
LED Flash Diagnostic / Control Fault | View Details |
| – |
Hoover washing machine does not drain water; clothes remain soaked at end of cycle, but no error code is shown.
|
Partial Drain Blockage | View Details |
| – |
Hoover washing machine does not heat water; cycles complete but clothes are cold and detergent may not dissolve fully.
|
No Heating | View Details |
| – |
Hoover washing machine door will not lock at the start of a cycle; clicking noise but no start, no code.
|
Mechanical Door Latch Misalignment | View Details |
| – |
Hoover washing machine door will not open at the end of the cycle; no error code displayed.
|
Door Lock Stuck Closed | View Details |
| – |
Hoover washing machine drum does not turn at all during wash or spin, but the machine fills and drains normally.
|
Drive System Failure | View Details |
| – |
Hoover washing machine emits a burning smell or visible smoke during operation.
|
Overheating Electrical Component | View Details |
| – |
Hoover washing machine has a strong mouldy or musty smell inside the drum and on clothes.
|
Biofilm and Detergent Residue Build-Up | View Details |
| – |
Hoover washing machine is leaking water from the front door area during wash or spin.
|
Door Seal (Gasket) Leak | View Details |
| – |
Hoover washing machine leaks water from underneath the cabinet during operation.
|
Internal Hose or Tub Leak | View Details |
| – |
Hoover washing machine leaves clothes very wet; spins but at low speed or stops spin early.
|
Spin Inefficiency / Unbalance Control | View Details |
| – |
Hoover washing machine makes a scraping or metallic rubbing noise when the drum turns.
|
Foreign Object Between Drum and Tub | View Details |
| – |
Hoover washing machine makes very loud rumbling or grinding noise during spin.
|
Drum Bearing Failure | View Details |
| – |
Hoover washing machine powers on but will not start a cycle; start button unresponsive or beeps.
|
User Interface / Control Lock Issue | View Details |
| – |
Hoover washing machine produces loud banging or knocking during spin, especially with heavy loads.
|
Excessive Vibration / Suspension Fault | View Details |
| – |
Hoover washing machine stops mid-cycle and trips the household circuit breaker or RCD.
|
Electrical Short or Earth Leakage | View Details |
| – |
Hoover washing machine will not start at all; no lights or display when power button is pressed.
|
No Power / Dead Appliance | View Details |
No matching codes found
Advertisements