Hansa Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher does not take in water, cycle stops shortly after start and E1 is displayed.
Water Inlet Timeout / No Fill
E10
Dishwasher shows E10 and may not start or may stop shortly after filling.
Water Hardness / Regeneration System Error
E11
Dishwasher displays E11 and may not start the wash cycle; sometimes associated with door not recognized as closed.
Door Lock / Door Switch Error
E12
Dishwasher shows E12 and may have issues with drying performance or fan operation.
Drying Fan / Ventilation Error
E13
Dishwasher displays E13 and may stop with water remaining in the tub or unusual level behavior.
Secondary Water Level / Overflow Sensor Error
E14
Dishwasher shows E14 and may not start or may abort early in the cycle.
Control Board Communication / Internal Error
E15
Dishwasher displays E15 and will not start; often accompanied by continuous drain pump operation.
Base Leak / Anti-Flood Triggered
E16
Dishwasher shows E16 and may not fill correctly or may interrupt the cycle.
Inlet Valve / AquaStop Error
E17
Dishwasher displays E17 and may stop with water remaining or with unusual filling behavior.
Water Inlet Overfill / High-Level Error
E18
Dishwasher shows E18 and may not fill enough water; wash performance is poor.
Low Water Level / Underfill Error
E19
Dishwasher displays E19 and may have issues with the water softener or regeneration cycle.
Regeneration Valve / Softener Control Error
E2
Dishwasher stops mid-cycle, does not drain water, and E2 is displayed.
Drain Timeout / No Drain
E20
Dishwasher shows E20 and may not start or may stop unexpectedly; sometimes associated with motor or pump issues.
Motor Control / Triac Error
E3
Dishwasher fills but water does not heat; program runs unusually long and E3 appears near the end.
Heating Circuit Failure
E4
Dishwasher stops and displays E4; water may be found in the base tray and the drain pump runs continuously.
Anti-Flood / Overflow Protection Activated
E5
Dishwasher overfills with water, water level is very high in the tub, and E5 is displayed.
Overfill / Water Level Sensor Fault
E6
Dishwasher stops and displays E6; may not start washing phase after filling.
Circulation Pump Failure
E7
Dishwasher displays E7 and may stop shortly after starting; sometimes associated with incorrect water level detection.
Flow Meter / Water Intake Sensor Error
E8
Dishwasher shows E8 and may have poor or no water circulation to upper spray arms.
Water Distribution / Diverter Valve Error
E9
Dishwasher displays E9 and may stop heating or abort the cycle.
NTC Temperature Sensor Fault
Symptom
Detergent tablet or powder remains in the dispenser at the end of the cycle.
Detergent Dispenser Not Opening / Ineffective Release
Symptom
Dishes come out dirty, with food residues stuck on plates and glasses after a full cycle.
Poor Wash Performance
Symptom
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom but no error code is shown.
Partial Drain Failure
Symptom
Dishwasher door does not latch properly; cycle will not start or stops when door is touched.
Door Latch Misalignment
Symptom
Dishwasher door drops down quickly or will not stay in a partially open position.
Door Spring / Hinge Cable Failure
Symptom
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
No Circulation / Wash Pump Not Running
Symptom
Dishwasher leaks water from the bottom front of the door during the wash cycle.
Door Seal / Spray Pattern Leak
Symptom
Dishwasher leaks water from underneath the cabinet; water appears on the floor near the sides or back.
Internal Hose or Sump Leak
Symptom
Dishwasher makes loud grinding or rattling noises during the wash cycle.
Mechanical Noise / Foreign Object in Pump
Symptom
Dishwasher powers on but will not start any program; Start button unresponsive or program cancels immediately.
User Interface / Start Circuit Fault
Symptom
Dishwasher vibrates excessively or moves during operation, especially during drain or wash phases.
Excessive Vibration / Installation Issue
Symptom
Dishwasher will not power on at all; no lights or display, no response to buttons.
No Power / Dead Appliance
Symptom
Display or indicator lights flicker or go off and on during operation, but the dishwasher continues running.
Intermittent Power / UI Connection Issue
Symptom
Glasses and dishes are wet at the end of the cycle; poor drying performance without an error code.
Insufficient Drying
Symptom
Plastic items and light dishes flip over or move around during the cycle.
Improper Loading / Spray Pressure Displacement
Symptom
Rust spots or corrosion appearing on the interior racks or on cutlery after washing.
Corrosion / Rack Coating Damage
Symptom
Steam or moisture escapes from the sides or top of the door, causing condensation on surrounding cabinets.
Door Seal / Venting Issue
Symptom
Strong bad smell from inside the dishwasher, especially when opening the door after it has been closed for some time.
Odor / Bacterial Growth
Symptom
White film or limescale deposits on dishes and inside the tub after washing.
Limescale / Hard Water Deposits
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher does not take in water, cycle stops shortly after start and E1 is displayed.
|
Water Inlet Timeout / No Fill | View Details |
| E10 |
Dishwasher shows E10 and may not start or may stop shortly after filling.
|
Water Hardness / Regeneration System Error | View Details |
| E11 |
Dishwasher displays E11 and may not start the wash cycle; sometimes associated with door not recognized as closed.
|
Door Lock / Door Switch Error | View Details |
| E12 |
Dishwasher shows E12 and may have issues with drying performance or fan operation.
|
Drying Fan / Ventilation Error | View Details |
| E13 |
Dishwasher displays E13 and may stop with water remaining in the tub or unusual level behavior.
|
Secondary Water Level / Overflow Sensor Error | View Details |
| E14 |
Dishwasher shows E14 and may not start or may abort early in the cycle.
|
Control Board Communication / Internal Error | View Details |
| E15 |
Dishwasher displays E15 and will not start; often accompanied by continuous drain pump operation.
|
Base Leak / Anti-Flood Triggered | View Details |
| E16 |
Dishwasher shows E16 and may not fill correctly or may interrupt the cycle.
|
Inlet Valve / AquaStop Error | View Details |
| E17 |
Dishwasher displays E17 and may stop with water remaining or with unusual filling behavior.
|
Water Inlet Overfill / High-Level Error | View Details |
| E18 |
Dishwasher shows E18 and may not fill enough water; wash performance is poor.
|
Low Water Level / Underfill Error | View Details |
| E19 |
Dishwasher displays E19 and may have issues with the water softener or regeneration cycle.
|
Regeneration Valve / Softener Control Error | View Details |
| E2 |
Dishwasher stops mid-cycle, does not drain water, and E2 is displayed.
|
Drain Timeout / No Drain | View Details |
| E20 |
Dishwasher shows E20 and may not start or may stop unexpectedly; sometimes associated with motor or pump issues.
|
Motor Control / Triac Error | View Details |
| E3 |
Dishwasher fills but water does not heat; program runs unusually long and E3 appears near the end.
|
Heating Circuit Failure | View Details |
| E4 |
Dishwasher stops and displays E4; water may be found in the base tray and the drain pump runs continuously.
|
Anti-Flood / Overflow Protection Activated | View Details |
| E5 |
Dishwasher overfills with water, water level is very high in the tub, and E5 is displayed.
|
Overfill / Water Level Sensor Fault | View Details |
| E6 |
Dishwasher stops and displays E6; may not start washing phase after filling.
|
Circulation Pump Failure | View Details |
| E7 |
Dishwasher displays E7 and may stop shortly after starting; sometimes associated with incorrect water level detection.
|
Flow Meter / Water Intake Sensor Error | View Details |
| E8 |
Dishwasher shows E8 and may have poor or no water circulation to upper spray arms.
|
Water Distribution / Diverter Valve Error | View Details |
| E9 |
Dishwasher displays E9 and may stop heating or abort the cycle.
|
NTC Temperature Sensor Fault | View Details |
| – |
Detergent tablet or powder remains in the dispenser at the end of the cycle.
|
Detergent Dispenser Not Opening / Ineffective Release | View Details |
| – |
Dishes come out dirty, with food residues stuck on plates and glasses after a full cycle.
|
Poor Wash Performance | View Details |
| – |
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom but no error code is shown.
|
Partial Drain Failure | View Details |
| – |
Dishwasher door does not latch properly; cycle will not start or stops when door is touched.
|
Door Latch Misalignment | View Details |
| – |
Dishwasher door drops down quickly or will not stay in a partially open position.
|
Door Spring / Hinge Cable Failure | View Details |
| – |
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
|
No Circulation / Wash Pump Not Running | View Details |
| – |
Dishwasher leaks water from the bottom front of the door during the wash cycle.
|
Door Seal / Spray Pattern Leak | View Details |
| – |
Dishwasher leaks water from underneath the cabinet; water appears on the floor near the sides or back.
|
Internal Hose or Sump Leak | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during the wash cycle.
|
Mechanical Noise / Foreign Object in Pump | View Details |
| – |
Dishwasher powers on but will not start any program; Start button unresponsive or program cancels immediately.
|
User Interface / Start Circuit Fault | View Details |
| – |
Dishwasher vibrates excessively or moves during operation, especially during drain or wash phases.
|
Excessive Vibration / Installation Issue | View Details |
| – |
Dishwasher will not power on at all; no lights or display, no response to buttons.
|
No Power / Dead Appliance | View Details |
| – |
Display or indicator lights flicker or go off and on during operation, but the dishwasher continues running.
|
Intermittent Power / UI Connection Issue | View Details |
| – |
Glasses and dishes are wet at the end of the cycle; poor drying performance without an error code.
|
Insufficient Drying | View Details |
| – |
Plastic items and light dishes flip over or move around during the cycle.
|
Improper Loading / Spray Pressure Displacement | View Details |
| – |
Rust spots or corrosion appearing on the interior racks or on cutlery after washing.
|
Corrosion / Rack Coating Damage | View Details |
| – |
Steam or moisture escapes from the sides or top of the door, causing condensation on surrounding cabinets.
|
Door Seal / Venting Issue | View Details |
| – |
Strong bad smell from inside the dishwasher, especially when opening the door after it has been closed for some time.
|
Odor / Bacterial Growth | View Details |
| – |
White film or limescale deposits on dishes and inside the tub after washing.
|
Limescale / Hard Water Deposits | View Details |
No matching codes found
Advertisements