New World
New World Dryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dryer will not start; display shows E01 immediately after pressing the start button.
Door Interlock Circuit Fault
E02
Dryer stops shortly after starting; display shows E02 and drum may not rotate.
Motor Start Failure / Motor Circuit Fault
E03
Dryer runs but no heat; display shows E03 after a short time.
Heating Circuit Failure
E04
Dryer overheats or stops mid-cycle; display shows E04 and clothes feel very hot.
Overtemperature / Restricted Airflow Fault
E05
Dryer stops and displays E05; cycle ends quickly with clothes still wet.
NTC Temperature Sensor Fault
E06
Dryer does not detect moisture correctly; ends cycle too soon or runs excessively long; E06 displayed.
Moisture Sensor Circuit Fault
E07
Dryer drum does not rotate; E07 displayed shortly after start.
Drum Drive Belt / Tensioner Fault
E08
Dryer runs but makes a loud humming noise and may stop; E08 displayed.
Motor Overload / Stalled Motor
E09
Dryer does not respond to button presses; E09 or blank display with intermittent E09.
User Interface / Control Panel Communication Fault
E10
Dryer stops and displays E10; condenser models may show poor drying performance.
Condenser Pump / Water Level Fault (Condenser Dryer)
E11
Condenser dryer shows E11 and stops; water tank symbol may flash even when tank is empty.
Water Tank Full Sensor Fault
E12
Heat pump dryer (if applicable) shows E12 and does not heat properly.
Heat Pump System Fault
E13
Dryer displays E13 and may stop shortly after starting; fan may not run.
Fan Motor / Airflow Motor Fault
E14
Dryer shows E14 and will not start; sometimes accompanied by tripping the household breaker.
Heater Earth Leakage / Short Circuit
E15
Dryer displays E15; drum light may work but machine will not start.
Door Latch / Mechanical Door Lock Fault
E16
Dryer shows E16 and stops; often associated with very long drying times on condenser models.
Condenser Airflow / Blocked Condenser Fault
E17
Dryer displays E17; internal light may flicker or not work.
Drum Light / Auxiliary Power Fault
E18
Dryer shows E18 and may stop unexpectedly; often after a power cut or surge.
Power Supply / Voltage Fault
E19
Dryer displays E19; program selector may not change cycles correctly.
Program Selector / Encoder Fault
E20
Dryer shows E20 and will not start; child lock symbol may be lit.
Child Lock / Control Lock Fault
Symptom
Clothes come out very wrinkled or creased after drying.
Overdrying / Drum Reversal or Cool-Down Issue
Symptom
Dryer control panel buttons are unresponsive or respond intermittently.
User Interface Button / Touchpad Fault
Symptom
Dryer display shows incorrect remaining time or jumps suddenly during the cycle.
Sensor-Controlled Drying Calibration / Moisture Sensing Issue
Symptom
Dryer door glass or outer surface becomes excessively hot to the touch.
Front Seal / Airflow Imbalance
Symptom
Dryer door is difficult to open or does not stay closed properly.
Door Hinge / Latch Alignment Fault
Symptom
Dryer drum does not turn, but you can hear the motor humming or running.
Broken or Slipping Drive Belt
Symptom
Dryer drum light does not work, but the dryer otherwise operates normally.
Drum Light Failure
Symptom
Dryer emits a burning smell during operation, with or without visible smoke.
Overheating / Lint Ignition Risk
Symptom
Dryer emits a musty or damp smell from the drum or exhaust.
Odour / Bacterial Build-Up
Symptom
Dryer interior light stays on even when the door is closed.
Door Switch Stuck / Light Circuit Fault
Symptom
Dryer leaks water onto the floor (condenser or heat pump models).
Condensate Leak / Drainage Fault
Symptom
Dryer makes loud squealing or screeching noises during operation.
Worn Drum Support Rollers / Bearings
Symptom
Dryer powers on but will not start when the start button is pressed.
Start Circuit / Safety Interlock Fault
Symptom
Dryer produces a loud banging or thumping noise as the drum turns.
Drum Support or Loose Baffle Fault
Symptom
Dryer runs but produces no heat; clothes remain cold and wet after full cycle.
Heating Element or Thermostat Failure
Symptom
Dryer runs but takes excessively long to dry clothes; laundry remains damp at end of cycle.
Restricted Airflow / Poor Ventilation
Symptom
Dryer stops mid-cycle and will not restart until it cools down.
Motor Overheating / Thermal Cut-Out Activation
Symptom
Dryer trips the household circuit breaker or RCD during or shortly after start.
Electrical Short / Earth Leakage
Symptom
Dryer vibrates excessively or moves across the floor during operation.
Cabinet Vibration / Imbalance
Symptom
Dryer will not start at all; no lights or display, completely dead.
No Power / Main Supply Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dryer will not start; display shows E01 immediately after pressing the start button.
|
Door Interlock Circuit Fault | View Details |
| E02 |
Dryer stops shortly after starting; display shows E02 and drum may not rotate.
|
Motor Start Failure / Motor Circuit Fault | View Details |
| E03 |
Dryer runs but no heat; display shows E03 after a short time.
|
Heating Circuit Failure | View Details |
| E04 |
Dryer overheats or stops mid-cycle; display shows E04 and clothes feel very hot.
|
Overtemperature / Restricted Airflow Fault | View Details |
| E05 |
Dryer stops and displays E05; cycle ends quickly with clothes still wet.
|
NTC Temperature Sensor Fault | View Details |
| E06 |
Dryer does not detect moisture correctly; ends cycle too soon or runs excessively long; E06 displayed.
|
Moisture Sensor Circuit Fault | View Details |
| E07 |
Dryer drum does not rotate; E07 displayed shortly after start.
|
Drum Drive Belt / Tensioner Fault | View Details |
| E08 |
Dryer runs but makes a loud humming noise and may stop; E08 displayed.
|
Motor Overload / Stalled Motor | View Details |
| E09 |
Dryer does not respond to button presses; E09 or blank display with intermittent E09.
|
User Interface / Control Panel Communication Fault | View Details |
| E10 |
Dryer stops and displays E10; condenser models may show poor drying performance.
|
Condenser Pump / Water Level Fault (Condenser Dryer) | View Details |
| E11 |
Condenser dryer shows E11 and stops; water tank symbol may flash even when tank is empty.
|
Water Tank Full Sensor Fault | View Details |
| E12 |
Heat pump dryer (if applicable) shows E12 and does not heat properly.
|
Heat Pump System Fault | View Details |
| E13 |
Dryer displays E13 and may stop shortly after starting; fan may not run.
|
Fan Motor / Airflow Motor Fault | View Details |
| E14 |
Dryer shows E14 and will not start; sometimes accompanied by tripping the household breaker.
|
Heater Earth Leakage / Short Circuit | View Details |
| E15 |
Dryer displays E15; drum light may work but machine will not start.
|
Door Latch / Mechanical Door Lock Fault | View Details |
| E16 |
Dryer shows E16 and stops; often associated with very long drying times on condenser models.
|
Condenser Airflow / Blocked Condenser Fault | View Details |
| E17 |
Dryer displays E17; internal light may flicker or not work.
|
Drum Light / Auxiliary Power Fault | View Details |
| E18 |
Dryer shows E18 and may stop unexpectedly; often after a power cut or surge.
|
Power Supply / Voltage Fault | View Details |
| E19 |
Dryer displays E19; program selector may not change cycles correctly.
|
Program Selector / Encoder Fault | View Details |
| E20 |
Dryer shows E20 and will not start; child lock symbol may be lit.
|
Child Lock / Control Lock Fault | View Details |
| – |
Clothes come out very wrinkled or creased after drying.
|
Overdrying / Drum Reversal or Cool-Down Issue | View Details |
| – |
Dryer control panel buttons are unresponsive or respond intermittently.
|
User Interface Button / Touchpad Fault | View Details |
| – |
Dryer display shows incorrect remaining time or jumps suddenly during the cycle.
|
Sensor-Controlled Drying Calibration / Moisture Sensing Issue | View Details |
| – |
Dryer door glass or outer surface becomes excessively hot to the touch.
|
Front Seal / Airflow Imbalance | View Details |
| – |
Dryer door is difficult to open or does not stay closed properly.
|
Door Hinge / Latch Alignment Fault | View Details |
| – |
Dryer drum does not turn, but you can hear the motor humming or running.
|
Broken or Slipping Drive Belt | View Details |
| – |
Dryer drum light does not work, but the dryer otherwise operates normally.
|
Drum Light Failure | View Details |
| – |
Dryer emits a burning smell during operation, with or without visible smoke.
|
Overheating / Lint Ignition Risk | View Details |
| – |
Dryer emits a musty or damp smell from the drum or exhaust.
|
Odour / Bacterial Build-Up | View Details |
| – |
Dryer interior light stays on even when the door is closed.
|
Door Switch Stuck / Light Circuit Fault | View Details |
| – |
Dryer leaks water onto the floor (condenser or heat pump models).
|
Condensate Leak / Drainage Fault | View Details |
| – |
Dryer makes loud squealing or screeching noises during operation.
|
Worn Drum Support Rollers / Bearings | View Details |
| – |
Dryer powers on but will not start when the start button is pressed.
|
Start Circuit / Safety Interlock Fault | View Details |
| – |
Dryer produces a loud banging or thumping noise as the drum turns.
|
Drum Support or Loose Baffle Fault | View Details |
| – |
Dryer runs but produces no heat; clothes remain cold and wet after full cycle.
|
Heating Element or Thermostat Failure | View Details |
| – |
Dryer runs but takes excessively long to dry clothes; laundry remains damp at end of cycle.
|
Restricted Airflow / Poor Ventilation | View Details |
| – |
Dryer stops mid-cycle and will not restart until it cools down.
|
Motor Overheating / Thermal Cut-Out Activation | View Details |
| – |
Dryer trips the household circuit breaker or RCD during or shortly after start.
|
Electrical Short / Earth Leakage | View Details |
| – |
Dryer vibrates excessively or moves across the floor during operation.
|
Cabinet Vibration / Imbalance | View Details |
| – |
Dryer will not start at all; no lights or display, completely dead.
|
No Power / Main Supply Fault | View Details |
No matching codes found
Advertisements