Fisher & Paykel Ranges & Cooktops Error Codes

F1

Oven beeps and displays F1, oven will not start or shuts off shortly after starting

Oven Temperature Sensor Circuit Fault

F2

Oven displays F2 and may shut off during a cooking cycle, often when using high temperatures or self-clean

Oven Over-Temperature Fault

F3

F3 displayed, oven will not heat or cancels cycle shortly after starting

Oven Temperature Sensor Open Circuit

F30

F30 displayed on oven, oven will not start or stops mid-cycle

Cooling Fan Speed or Feedback Fault

F31

F31 displayed, oven may shut down shortly after starting, fan may run at incorrect speed

Cooling Fan Over-Speed or Under-Speed Fault

F32

F32 displayed, oven may not heat or may shut down unexpectedly

Oven Cavity Overheat / Cooling System Fault

F4

F4 displayed, oven may overheat or not regulate temperature correctly

Oven Temperature Sensor Short Circuit

F40

F40 displayed, oven will not heat, relays do not click

Power Relay or Triac Drive Fault

F41

F41 displayed, oven may partially heat or one function (bake or broil) is inoperative

Heating Element Relay Fault

F5

F5 displayed, oven functions may be locked out or unresponsive

Oven Control Board Internal Fault

F50

F50 displayed on induction cooktop or induction zone of range, affected zone will not heat

Induction Power Module Overcurrent / IGBT Fault

F51

F51 displayed on induction cooktop, one or more zones shut down during cooking

Induction Module Overtemperature Fault

F53

F53 displayed on induction cooktop, specific zone will not start or shuts off immediately

Induction Coil or Pan Detection Fault

F54

F54 displayed on induction cooktop, multiple zones may be affected

Induction Supply Voltage or Phase Fault

F60

F60 displayed on gas cooktop with electronic ignition, burners will not ignite or keep sparking

Ignition Module Fault

F61

F61 displayed on gas cooktop, one burner continuously sparks even when off

Stuck Ignition Switch Fault

F7

F7 displayed, beeping from control panel, some keys may not respond

Stuck or Shorted Keypad Fault

F70

F70 displayed, oven or cooktop touch controls unresponsive or partially responsive

User Interface Communication Fault

F71

F71 displayed, oven display may be blank or show garbled characters

Display Module Fault

F9

F9 displayed, oven door will not lock or unlock during self-clean, self-clean will not start

Oven Door Lock Mechanism Fault

F90

F90 displayed, oven door will not open after self-clean or will not lock to start self-clean

Self-Clean Door Lock Fault

F91

F91 displayed, self-clean cycle aborts, door may be stuck locked or unlocked

Self-Clean Cycle Abort / Lock Feedback Fault

Symptom

Control knobs on range or cooktop are hard to turn or feel loose

Valve or Knob Wear

Symptom

Cooktop glass is cracked or shattered

Ceramic Glass Surface Damage

Symptom

Gas cooktop burner clicks and sparks but flame does not light or is very weak

Gas Supply or Burner Blockage Fault

Symptom

Gas cooktop burner flame is yellow, noisy, or lifting off the burner

Incorrect Air-Gas Mixture

Symptom

Gas cooktop burner ignites but keeps clicking even after flame is established

Flame Detection / Ignition Switch Stuck

Symptom

Gas cooktop burner will not ignite, no clicking or spark heard

Ignition System No-Spark Fault

Symptom

Induction cooktop shuts off unexpectedly during cooking, often at high power

Thermal Overload of Induction Module

Symptom

Induction cooktop zone does not detect pan, display shows low power bars or flashes pan symbol

Pan Detection Failure

Symptom

Oven does not heat at all, no error code displayed, control appears normal

No-Heat Condition

Symptom

Oven door will not close fully or pops open slightly during cooking

Door Hinge or Latch Misalignment

Symptom

Oven door will not open after normal baking (no self-clean used)

Door Latch or Seal Sticking

Symptom

Oven fan is very noisy, rattling, or grinding during operation

Convection or Cooling Fan Bearing Failure

Symptom

Oven heats but does not reach set temperature or cooks unevenly

Temperature Regulation / Calibration Fault

Symptom

Oven light works but control panel is dead, no display or response

Control Power Supply Fault

Symptom

Oven produces excessive smoke or burning smell during normal cooking

Contamination / Residue Burn-Off

Symptom

Oven takes excessively long to preheat

Reduced Heating Performance

Symptom

Radiant electric cooktop element does not heat, indicator light may still come on

Open Radiant Element or Infinite Switch Fault

Symptom

Range or cooktop metal surfaces give a mild electric shock when touched

Grounding / Leakage Fault

Symptom

Range or cooktop trips circuit breaker when turned on

Electrical Short or Overload