Summit Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Washer-dryer combo will not fill with water; cycle starts then quickly stops and displays E1.
Water Inlet Timeout / No Fill Detected
E10
Washer-dryer combo shows E10 and will not start drying; wash cycle may complete normally.
Dryer Fan / Blower Motor Fault
E11
Washer-dryer combo displays E11 and does not heat properly during drying; may stop early.
Dryer Temperature Sensor (NTC) Fault
E12
Washer-dryer combo shows E12 and may stop during drying; condenser area may feel very hot.
Condenser / Airflow Restriction Error (Ventless Drying System)
E13
Washer-dryer combo displays E13 and may stop with water in the base or leak detected.
Leak / Overflow Protection (Base Float Switch Activated)
E14
Washer-dryer combo shows E14 and will not start; control panel may be unresponsive or partially functional.
Communication Error Between Control Panel and Main PCB
E15
Washer-dryer combo displays E15 and may not lock the door or start a cycle; sometimes occurs after a power surge.
Control Board / EEPROM Configuration Error
E16
Washer-dryer combo shows E16 and stops; may be associated with overheating during drying.
Overheating Protection / Thermal Cutoff Triggered
E17
Washer-dryer combo displays E17 and may not fill correctly with hot or cold water; temperature seems wrong.
Inlet Water Temperature Sensor / Thermistor Error
E18
Washer-dryer combo shows E18 and stops; may occur when switching from wash to dry.
Mode Switch / Program Transition Error
E2
Washer-dryer combo does not drain; water remains in drum and E2 is displayed.
Drain Timeout / No Drain Detected
E3
Washer-dryer combo drum does not spin or tumble; unit may fill and drain but shows E3 when trying to wash or spin.
Motor Drive Fault / No Drum Rotation
E4
Washer-dryer combo displays E4 and stops during spin; drum may be banging or not reaching full speed.
Unbalanced Load / Out-of-Balance Detection
E5
Washer-dryer combo does not heat during drying cycle; clothes remain wet and cool, E5 displayed.
Dryer Heating Fault
E6
Washer-dryer combo stops mid-cycle and displays E6; may not advance through wash or rinse.
Water Level Sensor / Pressure Switch Error
E7
Washer-dryer combo displays E7 and will not start or complete a cycle; may stop shortly after starting.
Door Lock / Door Switch Fault
E8
Washer-dryer combo shows E8 and stops; may occur during wash or spin with unusual noises.
Motor Overload / Tachometer Feedback Error
E9
Washer-dryer combo displays E9 and may stop filling or draining; water level seems abnormal (too high or too low).
Overflow / Abnormal Water Level Error
Symptom
Washer-dryer combo causes a burning smell during drying or high-temperature wash.
Overheating or Lint on Heater
Symptom
Washer-dryer combo display flickers or resets during operation; unit may stop mid-cycle without an error code.
Intermittent Power / Control Voltage Drop
Symptom
Washer-dryer combo door remains locked after cycle completion; no error code displayed.
Door Lock Stuck / Fails to Unlock
Symptom
Washer-dryer combo door seal shows black spots and mildew; occasional small leaks at bottom of door.
Moldy Door Gasket with Minor Seepage
Symptom
Washer-dryer combo drum does not tumble during drying, but heater seems to work; clothes dry unevenly and may scorch.
No Tumble in Dry Cycle
Symptom
Washer-dryer combo emits a clicking or rattling noise from the pump area, especially during drain.
Foreign Object in Drain Pump
Symptom
Washer-dryer combo emits a grinding or rumbling noise, especially at high spin speeds.
Drum Bearing or Spider Arm Failure
Symptom
Washer-dryer combo has a strong musty or moldy odor inside the drum.
Biofilm and Mold Build-Up in Drum and Gasket
Symptom
Washer-dryer combo leaks water from the front door area during wash or rinse.
Door Gasket / Boot Seal Leak
Symptom
Washer-dryer combo leaks water from the rear or underneath during wash or drain.
Internal Hose or Pump Leak
Symptom
Washer-dryer combo leaves clothes soaking wet at the end of the cycle; spin seems weak or does not occur.
No or Low Spin Performance
Symptom
Washer-dryer combo leaves detergent residue or white streaks on clothes after washing.
Poor Rinsing / Detergent Dispensing Issue
Symptom
Washer-dryer combo makes loud banging or knocking noises during spin.
Excessive Vibration / Suspension or Bearing Wear
Symptom
Washer-dryer combo occasionally trips the household breaker or GFCI outlet during operation.
Electrical Short or Ground Fault
Symptom
Washer-dryer combo powers on but will not start any cycle; pressing Start does nothing and no error code is shown.
Start Circuit / User Interface Input Failure
Symptom
Washer-dryer combo produces a high-pitched squealing or screeching noise during spin or tumble.
Drive Belt or Pulley Noise
Symptom
Washer-dryer combo takes excessively long to dry clothes; loads come out damp even after full cycle.
Poor Drying Performance
Symptom
Washer-dryer combo vibrates excessively and walks across the floor during spin.
Severe Vibration / Installation Issue
Symptom
Washer-dryer combo will not power on at all; no lights or display, unit appears dead.
No Power / Main Power Supply Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Washer-dryer combo will not fill with water; cycle starts then quickly stops and displays E1.
|
Water Inlet Timeout / No Fill Detected | View Details |
| E10 |
Washer-dryer combo shows E10 and will not start drying; wash cycle may complete normally.
|
Dryer Fan / Blower Motor Fault | View Details |
| E11 |
Washer-dryer combo displays E11 and does not heat properly during drying; may stop early.
|
Dryer Temperature Sensor (NTC) Fault | View Details |
| E12 |
Washer-dryer combo shows E12 and may stop during drying; condenser area may feel very hot.
|
Condenser / Airflow Restriction Error (Ventless Drying System) | View Details |
| E13 |
Washer-dryer combo displays E13 and may stop with water in the base or leak detected.
|
Leak / Overflow Protection (Base Float Switch Activated) | View Details |
| E14 |
Washer-dryer combo shows E14 and will not start; control panel may be unresponsive or partially functional.
|
Communication Error Between Control Panel and Main PCB | View Details |
| E15 |
Washer-dryer combo displays E15 and may not lock the door or start a cycle; sometimes occurs after a power surge.
|
Control Board / EEPROM Configuration Error | View Details |
| E16 |
Washer-dryer combo shows E16 and stops; may be associated with overheating during drying.
|
Overheating Protection / Thermal Cutoff Triggered | View Details |
| E17 |
Washer-dryer combo displays E17 and may not fill correctly with hot or cold water; temperature seems wrong.
|
Inlet Water Temperature Sensor / Thermistor Error | View Details |
| E18 |
Washer-dryer combo shows E18 and stops; may occur when switching from wash to dry.
|
Mode Switch / Program Transition Error | View Details |
| E2 |
Washer-dryer combo does not drain; water remains in drum and E2 is displayed.
|
Drain Timeout / No Drain Detected | View Details |
| E3 |
Washer-dryer combo drum does not spin or tumble; unit may fill and drain but shows E3 when trying to wash or spin.
|
Motor Drive Fault / No Drum Rotation | View Details |
| E4 |
Washer-dryer combo displays E4 and stops during spin; drum may be banging or not reaching full speed.
|
Unbalanced Load / Out-of-Balance Detection | View Details |
| E5 |
Washer-dryer combo does not heat during drying cycle; clothes remain wet and cool, E5 displayed.
|
Dryer Heating Fault | View Details |
| E6 |
Washer-dryer combo stops mid-cycle and displays E6; may not advance through wash or rinse.
|
Water Level Sensor / Pressure Switch Error | View Details |
| E7 |
Washer-dryer combo displays E7 and will not start or complete a cycle; may stop shortly after starting.
|
Door Lock / Door Switch Fault | View Details |
| E8 |
Washer-dryer combo shows E8 and stops; may occur during wash or spin with unusual noises.
|
Motor Overload / Tachometer Feedback Error | View Details |
| E9 |
Washer-dryer combo displays E9 and may stop filling or draining; water level seems abnormal (too high or too low).
|
Overflow / Abnormal Water Level Error | View Details |
| – |
Washer-dryer combo causes a burning smell during drying or high-temperature wash.
|
Overheating or Lint on Heater | View Details |
| – |
Washer-dryer combo display flickers or resets during operation; unit may stop mid-cycle without an error code.
|
Intermittent Power / Control Voltage Drop | View Details |
| – |
Washer-dryer combo door remains locked after cycle completion; no error code displayed.
|
Door Lock Stuck / Fails to Unlock | View Details |
| – |
Washer-dryer combo door seal shows black spots and mildew; occasional small leaks at bottom of door.
|
Moldy Door Gasket with Minor Seepage | View Details |
| – |
Washer-dryer combo drum does not tumble during drying, but heater seems to work; clothes dry unevenly and may scorch.
|
No Tumble in Dry Cycle | View Details |
| – |
Washer-dryer combo emits a clicking or rattling noise from the pump area, especially during drain.
|
Foreign Object in Drain Pump | View Details |
| – |
Washer-dryer combo emits a grinding or rumbling noise, especially at high spin speeds.
|
Drum Bearing or Spider Arm Failure | View Details |
| – |
Washer-dryer combo has a strong musty or moldy odor inside the drum.
|
Biofilm and Mold Build-Up in Drum and Gasket | View Details |
| – |
Washer-dryer combo leaks water from the front door area during wash or rinse.
|
Door Gasket / Boot Seal Leak | View Details |
| – |
Washer-dryer combo leaks water from the rear or underneath during wash or drain.
|
Internal Hose or Pump Leak | View Details |
| – |
Washer-dryer combo leaves clothes soaking wet at the end of the cycle; spin seems weak or does not occur.
|
No or Low Spin Performance | View Details |
| – |
Washer-dryer combo leaves detergent residue or white streaks on clothes after washing.
|
Poor Rinsing / Detergent Dispensing Issue | View Details |
| – |
Washer-dryer combo makes loud banging or knocking noises during spin.
|
Excessive Vibration / Suspension or Bearing Wear | View Details |
| – |
Washer-dryer combo occasionally trips the household breaker or GFCI outlet during operation.
|
Electrical Short or Ground Fault | View Details |
| – |
Washer-dryer combo powers on but will not start any cycle; pressing Start does nothing and no error code is shown.
|
Start Circuit / User Interface Input Failure | View Details |
| – |
Washer-dryer combo produces a high-pitched squealing or screeching noise during spin or tumble.
|
Drive Belt or Pulley Noise | View Details |
| – |
Washer-dryer combo takes excessively long to dry clothes; loads come out damp even after full cycle.
|
Poor Drying Performance | View Details |
| – |
Washer-dryer combo vibrates excessively and walks across the floor during spin.
|
Severe Vibration / Installation Issue | View Details |
| – |
Washer-dryer combo will not power on at all; no lights or display, unit appears dead.
|
No Power / Main Power Supply Failure | View Details |
No matching codes found
Advertisements