GE Profile Washing Machines Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
1
Washer displays error code 1 and will not start or stops shortly after starting.
Water Supply Error
2
Washer displays error code 2 and will not drain; water remains in tub.
Drain Error
3
Washer displays error code 3 and will not spin; clothes remain wet.
Unbalanced Load / Spin Error
4
Washer displays error code 4 and may stop mid-cycle with water in tub.
Overfill / Overflow Error
5
Washer displays error code 5 and will not lock the lid/door.
Lid Lock / Door Lock Error
6
Washer displays error code 6 and may not agitate or spin.
Motor / Drive Error
7
Washer displays error code 7 and may not sense water level correctly.
Pressure Sensor / Water Level Error
8
Washer displays error code 8 and may not heat water or complete sanitize cycles.
Heater / Temperature Error
9
Washer displays error code 9 and may not respond to controls.
Control / EEPROM Error
E22
Washer stops mid-cycle and displays E22; may not advance to rinse or spin.
Water Inlet Timeout / Fill Error
E23
Washer displays E23 and will not drain or complete the cycle; water remains in the tub.
Drain Pump Error / Drain Timeout
E30
Washer displays E30 and will not start or stops shortly after starting.
Door Lock / Lid Lock Failure
E31
Washer shows E31 and will not spin or advance; may stop after filling.
Door Lock Circuit Error / Lock Not Sensed
E42
Washer displays E42 and the door remains locked at the end of the cycle; may not unlock even when powered off.
Door Unlock Failure
E46
Washer shows E46 and may not start or may stop unexpectedly; often associated with control issues.
Control Board Communication / Internal Control Error
E47
Washer displays E47 and may not respond to button presses or may freeze mid-cycle.
User Interface / Control Panel Error
E48
Washer shows E48 and may not start or may shut down unexpectedly.
Power Supply / Line Voltage Error
E54
Washer displays E54 and may not spin or agitate; motor may not run.
Motor Drive Error / Motor Not Responding
E57
Washer shows E57 and may stop during spin or not reach full spin speed.
Motor Overcurrent / Overload Error
E60
Washer displays E60 and may not heat water properly or may stop during a sanitize cycle.
Water Heater / Temperature Sensor Error
E61
Washer shows E61 and may not complete cycles that require heating; water temperature reading seems incorrect.
Temperature Sensor (Thermistor) Fault
E70
Washer displays E70 and may not fill correctly; water level seems wrong or cycles end prematurely.
Water Level / Pressure Sensor Error
E71
Washer shows E71 and may overfill, underfill, or stop with water at an incorrect level.
Water Level Signal Out of Range
E80
Washer displays E80 and may not advance through cycles; timing seems erratic.
Cycle Control / Program Error
E90
Washer shows E90 and may not start; display may be blank or show partial information.
Communication Error Between Main Control and Display
E91
Washer displays E91 and may intermittently lose display or control response.
Intermittent Communication / UI Power Error
E92
Washer shows E92 and may not respond to certain buttons or options.
Keypad / Button Matrix Error
E93
Washer displays E93 and may not accept new settings or may revert to default cycle.
Configuration / EEPROM Error
E94
Washer shows E94 and may not complete certain cycles or options; programming seems inconsistent.
Cycle Configuration / Option Mismatch Error
E95
Washer displays E95 and may not start or may shut down unexpectedly during operation.
Internal Control Hardware Error
E96
Washer shows E96 and may not respond to commands; display may flicker or freeze.
Control Voltage Regulation Error
E97
Washer displays E97 and may not complete self-test or diagnostic routines.
Self-Test / Diagnostic Failure
E98
Washer shows E98 and may not start or may stop with no other obvious issue.
Unknown / General Control Error
END
Display shows END but clothes are still wet or cycle seems incomplete.
Cycle Completed but Performance Issue
H2O SUPPLY
Display shows H2O SUPPLY and washer will not start or pauses during fill.
Water Supply Problem Detected
LID
Display shows LID and washer will not start or advance.
Lid Open / Lid Lock Not Engaged
LID LOCKED
Display shows LID LOCKED and lid will not open at end of cycle.
Lid Unlock Failure
NO DRAIN
Display shows NO DRAIN; washer will not pump out water.
Drain Failure
NO FILL
Display shows NO FILL; washer does not fill with water.
Fill Failure
NO SPIN
Display shows NO SPIN; washer completes cycle but clothes are very wet.
Spin Not Achieved
OUT OF BALANCE
Display shows OUT OF BALANCE; washer repeatedly tries to rebalance and may not complete spin.
Unbalanced Load Condition
PAUSE
Display shows PAUSE and washer stops mid-cycle.
Cycle Paused / User or Lid Interruption
SUDS
Display shows SUDS or excessive suds; washer may extend rinse time or stop.
Oversudsing Detected
Symptom
Top-load washer agitator does not move clothes effectively; only the bottom or top section moves.
Agitator Dog / Clutch Failure
Symptom
Washer does not dispense detergent, bleach, or fabric softener properly; cups remain full after cycle.
Dispenser System Failure
Symptom
Washer emits a burning smell during operation, sometimes accompanied by smoke.
Overheating Component / Electrical Burn
Symptom
Washer fills with water but does not agitate; clothes just soak without movement.
Agitation Failure
Symptom
Washer has a strong moldy or musty odor, especially in front-load models.
Biofilm / Mold Buildup in Tub and Gasket
Symptom
Washer intermittently stops mid-cycle and then resumes or resets to the beginning.
Intermittent Power or Control Interruption
Symptom
Washer leaks water from the front door area during wash or spin.
Door Gasket / Boot Leak
Symptom
Washer leaks water from underneath the cabinet during operation.
Internal Hose or Tub Seal Leak
Symptom
Washer leaves clothes soaking wet at the end of the cycle, even though it appears to have spun.
Poor Extraction / Incomplete Spin
Symptom
Washer leaves visible detergent or white residue on clothes after washing.
Detergent Residue / Poor Rinsing
Symptom
Washer makes a grinding or scraping noise when the drum turns.
Foreign Object or Drum Support Damage
Symptom
Washer makes loud banging or knocking noises during spin; machine may move or "walk" across the floor.
Excessive Vibration / Out-of-Balance Spin
Symptom
Washer powers on but will not start a cycle; pressing Start does nothing or only beeps.
Start Circuit / Safety Interlock Not Satisfied
Symptom
Washer spins but is extremely loud, with roaring or rumbling noise, especially at high speed.
Tub Bearing Failure
Symptom
Washer will not power on; no lights or display, unit appears completely dead.
No Power / Dead Control
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| 1 |
Washer displays error code 1 and will not start or stops shortly after starting.
|
Water Supply Error | View Details |
| 2 |
Washer displays error code 2 and will not drain; water remains in tub.
|
Drain Error | View Details |
| 3 |
Washer displays error code 3 and will not spin; clothes remain wet.
|
Unbalanced Load / Spin Error | View Details |
| 4 |
Washer displays error code 4 and may stop mid-cycle with water in tub.
|
Overfill / Overflow Error | View Details |
| 5 |
Washer displays error code 5 and will not lock the lid/door.
|
Lid Lock / Door Lock Error | View Details |
| 6 |
Washer displays error code 6 and may not agitate or spin.
|
Motor / Drive Error | View Details |
| 7 |
Washer displays error code 7 and may not sense water level correctly.
|
Pressure Sensor / Water Level Error | View Details |
| 8 |
Washer displays error code 8 and may not heat water or complete sanitize cycles.
|
Heater / Temperature Error | View Details |
| 9 |
Washer displays error code 9 and may not respond to controls.
|
Control / EEPROM Error | View Details |
| E22 |
Washer stops mid-cycle and displays E22; may not advance to rinse or spin.
|
Water Inlet Timeout / Fill Error | View Details |
| E23 |
Washer displays E23 and will not drain or complete the cycle; water remains in the tub.
|
Drain Pump Error / Drain Timeout | View Details |
| E30 |
Washer displays E30 and will not start or stops shortly after starting.
|
Door Lock / Lid Lock Failure | View Details |
| E31 |
Washer shows E31 and will not spin or advance; may stop after filling.
|
Door Lock Circuit Error / Lock Not Sensed | View Details |
| E42 |
Washer displays E42 and the door remains locked at the end of the cycle; may not unlock even when powered off.
|
Door Unlock Failure | View Details |
| E46 |
Washer shows E46 and may not start or may stop unexpectedly; often associated with control issues.
|
Control Board Communication / Internal Control Error | View Details |
| E47 |
Washer displays E47 and may not respond to button presses or may freeze mid-cycle.
|
User Interface / Control Panel Error | View Details |
| E48 |
Washer shows E48 and may not start or may shut down unexpectedly.
|
Power Supply / Line Voltage Error | View Details |
| E54 |
Washer displays E54 and may not spin or agitate; motor may not run.
|
Motor Drive Error / Motor Not Responding | View Details |
| E57 |
Washer shows E57 and may stop during spin or not reach full spin speed.
|
Motor Overcurrent / Overload Error | View Details |
| E60 |
Washer displays E60 and may not heat water properly or may stop during a sanitize cycle.
|
Water Heater / Temperature Sensor Error | View Details |
| E61 |
Washer shows E61 and may not complete cycles that require heating; water temperature reading seems incorrect.
|
Temperature Sensor (Thermistor) Fault | View Details |
| E70 |
Washer displays E70 and may not fill correctly; water level seems wrong or cycles end prematurely.
|
Water Level / Pressure Sensor Error | View Details |
| E71 |
Washer shows E71 and may overfill, underfill, or stop with water at an incorrect level.
|
Water Level Signal Out of Range | View Details |
| E80 |
Washer displays E80 and may not advance through cycles; timing seems erratic.
|
Cycle Control / Program Error | View Details |
| E90 |
Washer shows E90 and may not start; display may be blank or show partial information.
|
Communication Error Between Main Control and Display | View Details |
| E91 |
Washer displays E91 and may intermittently lose display or control response.
|
Intermittent Communication / UI Power Error | View Details |
| E92 |
Washer shows E92 and may not respond to certain buttons or options.
|
Keypad / Button Matrix Error | View Details |
| E93 |
Washer displays E93 and may not accept new settings or may revert to default cycle.
|
Configuration / EEPROM Error | View Details |
| E94 |
Washer shows E94 and may not complete certain cycles or options; programming seems inconsistent.
|
Cycle Configuration / Option Mismatch Error | View Details |
| E95 |
Washer displays E95 and may not start or may shut down unexpectedly during operation.
|
Internal Control Hardware Error | View Details |
| E96 |
Washer shows E96 and may not respond to commands; display may flicker or freeze.
|
Control Voltage Regulation Error | View Details |
| E97 |
Washer displays E97 and may not complete self-test or diagnostic routines.
|
Self-Test / Diagnostic Failure | View Details |
| E98 |
Washer shows E98 and may not start or may stop with no other obvious issue.
|
Unknown / General Control Error | View Details |
| END |
Display shows END but clothes are still wet or cycle seems incomplete.
|
Cycle Completed but Performance Issue | View Details |
| H2O SUPPLY |
Display shows H2O SUPPLY and washer will not start or pauses during fill.
|
Water Supply Problem Detected | View Details |
| LID |
Display shows LID and washer will not start or advance.
|
Lid Open / Lid Lock Not Engaged | View Details |
| LID LOCKED |
Display shows LID LOCKED and lid will not open at end of cycle.
|
Lid Unlock Failure | View Details |
| NO DRAIN |
Display shows NO DRAIN; washer will not pump out water.
|
Drain Failure | View Details |
| NO FILL |
Display shows NO FILL; washer does not fill with water.
|
Fill Failure | View Details |
| NO SPIN |
Display shows NO SPIN; washer completes cycle but clothes are very wet.
|
Spin Not Achieved | View Details |
| OUT OF BALANCE |
Display shows OUT OF BALANCE; washer repeatedly tries to rebalance and may not complete spin.
|
Unbalanced Load Condition | View Details |
| PAUSE |
Display shows PAUSE and washer stops mid-cycle.
|
Cycle Paused / User or Lid Interruption | View Details |
| SUDS |
Display shows SUDS or excessive suds; washer may extend rinse time or stop.
|
Oversudsing Detected | View Details |
| – |
Top-load washer agitator does not move clothes effectively; only the bottom or top section moves.
|
Agitator Dog / Clutch Failure | View Details |
| – |
Washer does not dispense detergent, bleach, or fabric softener properly; cups remain full after cycle.
|
Dispenser System Failure | View Details |
| – |
Washer emits a burning smell during operation, sometimes accompanied by smoke.
|
Overheating Component / Electrical Burn | View Details |
| – |
Washer fills with water but does not agitate; clothes just soak without movement.
|
Agitation Failure | View Details |
| – |
Washer has a strong moldy or musty odor, especially in front-load models.
|
Biofilm / Mold Buildup in Tub and Gasket | View Details |
| – |
Washer intermittently stops mid-cycle and then resumes or resets to the beginning.
|
Intermittent Power or Control Interruption | View Details |
| – |
Washer leaks water from the front door area during wash or spin.
|
Door Gasket / Boot Leak | View Details |
| – |
Washer leaks water from underneath the cabinet during operation.
|
Internal Hose or Tub Seal Leak | View Details |
| – |
Washer leaves clothes soaking wet at the end of the cycle, even though it appears to have spun.
|
Poor Extraction / Incomplete Spin | View Details |
| – |
Washer leaves visible detergent or white residue on clothes after washing.
|
Detergent Residue / Poor Rinsing | View Details |
| – |
Washer makes a grinding or scraping noise when the drum turns.
|
Foreign Object or Drum Support Damage | View Details |
| – |
Washer makes loud banging or knocking noises during spin; machine may move or "walk" across the floor.
|
Excessive Vibration / Out-of-Balance Spin | View Details |
| – |
Washer powers on but will not start a cycle; pressing Start does nothing or only beeps.
|
Start Circuit / Safety Interlock Not Satisfied | View Details |
| – |
Washer spins but is extremely loud, with roaring or rumbling noise, especially at high speed.
|
Tub Bearing Failure | View Details |
| – |
Washer will not power on; no lights or display, unit appears completely dead.
|
No Power / Dead Control | View Details |
No matching codes found
Advertisements