Hansa Dryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dryer does not start, display shows E01 immediately after pressing Start
Door Lock / Door Switch Fault
E02
Dryer stops shortly after start or will not start, E02 displayed
Water Tank Full / Condensate Level Sensor Fault
E03
Dryer runs but clothes remain wet, E03 appears during or at end of cycle
Heating Circuit Failure
E04
Dryer stops and displays E04, often accompanied by very hot cabinet or burning smell
Overheating / High Temperature Protection Activated
E05
Dryer stops mid-cycle with E05, drum may not rotate
Motor Overload / Motor Drive Fault
E06
Dryer does not heat properly, E06 appears, drying times are very long
NTC Temperature Sensor Fault (Drum / Exhaust)
E07
Dryer stops with E07, often early in the cycle, drum may rotate normally
Humidity Sensor / Moisture Sensor Fault
E08
Dryer displays E08 and will not start or stops shortly after starting
Condensate Pump / Drain Pump Fault (Condenser & Heat Pump Models)
E09
Dryer shows E09, may not heat or may shut down unexpectedly
Control Board / Relay Fault
E10
Dryer does not start, E10 displayed, sometimes after a power outage
Power Supply / Voltage Error
E11
Dryer shows E11, drum does not rotate, a click may be heard
Door Locking System / Interlock Error
E12
Dryer displays E12, often associated with very long drying times and poor condensation
Airflow / Fan Motor Fault
E13
Dryer shows E13, may stop with water in the base tray (if equipped with leak protection)
Leak / Water in Base Tray Error
E14
Dryer displays E14 and stops, often on heat pump models
Heat Pump System Fault (Heat Pump Dryers)
E15
Dryer shows E15, buttons may not respond correctly
User Interface / Control Panel Communication Error
E16
Dryer displays E16, often related to sensor drying programs not working correctly
Drum Sensor / Grounding Fault
E17
Dryer shows E17, cycle may end prematurely with clothes still damp
Program Time / Sensor Calibration Error
E18
Dryer displays E18, often immediately after selecting a program
Configuration / Option Conflict Error
Symptom
Buttons on the dryer control panel do not respond or respond intermittently
Keypad / Touch Control Failure
Symptom
Dryer display and lights work but drum does not rotate and there is no motor sound
Motor Circuit Open
Symptom
Dryer display is very dim or segments missing, but dryer still operates
Display Module Degradation
Symptom
Dryer display shows time remaining but time does not count down, drum may turn
Program Control / Sensor Logic Fault
Symptom
Dryer door opens during cycle or does not stay closed
Door Latch / Hinge Fault
Symptom
Dryer door will not open after cycle ends
Door Lock Stuck Closed
Symptom
Dryer drum does not turn, motor hums or clicks, but no rotation
Drive Belt or Motor Start Circuit Failure
Symptom
Dryer drum light does not work but dryer otherwise operates normally
Drum Lamp Failure
Symptom
Dryer emits a grinding or scraping noise when drum turns
Foreign Object or Drum Glide Wear
Symptom
Dryer has a burning smell during operation
Overheating or Lint Ignition Risk
Symptom
Dryer has a musty or moldy smell, especially at the start of a cycle
Bacterial Growth in Condensate System
Symptom
Dryer leaks water onto the floor at the front or underneath
Condensate Handling / Sealing Fault
Symptom
Dryer makes loud banging or thumping noises during operation
Drum Support or Suspension Fault
Symptom
Dryer powers on but will not start when Start button is pressed
Start Circuit / Safety Interlock Issue
Symptom
Dryer produces a high-pitched squealing or squeaking noise
Idler Pulley or Roller Bearing Wear
Symptom
Dryer runs but does not heat, clothes come out cold and wet, no error code displayed
Heating Element or Thermal Fuse Failure
Symptom
Dryer runs only for a few minutes then stops, clothes barely warm
Thermal Cut-Out Tripping
Symptom
Dryer stops mid-cycle and display goes blank, then comes back after a while
Overheating or Power Interruption
Symptom
Dryer takes too long to dry, clothes are warm but still damp at end of cycle
Restricted Airflow / Partially Blocked Ducts
Symptom
Dryer trips the household circuit breaker or RCD during operation
Electrical Short or Earth Leakage
Symptom
Dryer vibrates excessively or moves across the floor during operation
Imbalance or Leveling Issue
Symptom
Dryer will not start at all, no lights on the display
No Power / Main Supply Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dryer does not start, display shows E01 immediately after pressing Start
|
Door Lock / Door Switch Fault | View Details |
| E02 |
Dryer stops shortly after start or will not start, E02 displayed
|
Water Tank Full / Condensate Level Sensor Fault | View Details |
| E03 |
Dryer runs but clothes remain wet, E03 appears during or at end of cycle
|
Heating Circuit Failure | View Details |
| E04 |
Dryer stops and displays E04, often accompanied by very hot cabinet or burning smell
|
Overheating / High Temperature Protection Activated | View Details |
| E05 |
Dryer stops mid-cycle with E05, drum may not rotate
|
Motor Overload / Motor Drive Fault | View Details |
| E06 |
Dryer does not heat properly, E06 appears, drying times are very long
|
NTC Temperature Sensor Fault (Drum / Exhaust) | View Details |
| E07 |
Dryer stops with E07, often early in the cycle, drum may rotate normally
|
Humidity Sensor / Moisture Sensor Fault | View Details |
| E08 |
Dryer displays E08 and will not start or stops shortly after starting
|
Condensate Pump / Drain Pump Fault (Condenser & Heat Pump Models) | View Details |
| E09 |
Dryer shows E09, may not heat or may shut down unexpectedly
|
Control Board / Relay Fault | View Details |
| E10 |
Dryer does not start, E10 displayed, sometimes after a power outage
|
Power Supply / Voltage Error | View Details |
| E11 |
Dryer shows E11, drum does not rotate, a click may be heard
|
Door Locking System / Interlock Error | View Details |
| E12 |
Dryer displays E12, often associated with very long drying times and poor condensation
|
Airflow / Fan Motor Fault | View Details |
| E13 |
Dryer shows E13, may stop with water in the base tray (if equipped with leak protection)
|
Leak / Water in Base Tray Error | View Details |
| E14 |
Dryer displays E14 and stops, often on heat pump models
|
Heat Pump System Fault (Heat Pump Dryers) | View Details |
| E15 |
Dryer shows E15, buttons may not respond correctly
|
User Interface / Control Panel Communication Error | View Details |
| E16 |
Dryer displays E16, often related to sensor drying programs not working correctly
|
Drum Sensor / Grounding Fault | View Details |
| E17 |
Dryer shows E17, cycle may end prematurely with clothes still damp
|
Program Time / Sensor Calibration Error | View Details |
| E18 |
Dryer displays E18, often immediately after selecting a program
|
Configuration / Option Conflict Error | View Details |
| – |
Buttons on the dryer control panel do not respond or respond intermittently
|
Keypad / Touch Control Failure | View Details |
| – |
Dryer display and lights work but drum does not rotate and there is no motor sound
|
Motor Circuit Open | View Details |
| – |
Dryer display is very dim or segments missing, but dryer still operates
|
Display Module Degradation | View Details |
| – |
Dryer display shows time remaining but time does not count down, drum may turn
|
Program Control / Sensor Logic Fault | View Details |
| – |
Dryer door opens during cycle or does not stay closed
|
Door Latch / Hinge Fault | View Details |
| – |
Dryer door will not open after cycle ends
|
Door Lock Stuck Closed | View Details |
| – |
Dryer drum does not turn, motor hums or clicks, but no rotation
|
Drive Belt or Motor Start Circuit Failure | View Details |
| – |
Dryer drum light does not work but dryer otherwise operates normally
|
Drum Lamp Failure | View Details |
| – |
Dryer emits a grinding or scraping noise when drum turns
|
Foreign Object or Drum Glide Wear | View Details |
| – |
Dryer has a burning smell during operation
|
Overheating or Lint Ignition Risk | View Details |
| – |
Dryer has a musty or moldy smell, especially at the start of a cycle
|
Bacterial Growth in Condensate System | View Details |
| – |
Dryer leaks water onto the floor at the front or underneath
|
Condensate Handling / Sealing Fault | View Details |
| – |
Dryer makes loud banging or thumping noises during operation
|
Drum Support or Suspension Fault | View Details |
| – |
Dryer powers on but will not start when Start button is pressed
|
Start Circuit / Safety Interlock Issue | View Details |
| – |
Dryer produces a high-pitched squealing or squeaking noise
|
Idler Pulley or Roller Bearing Wear | View Details |
| – |
Dryer runs but does not heat, clothes come out cold and wet, no error code displayed
|
Heating Element or Thermal Fuse Failure | View Details |
| – |
Dryer runs only for a few minutes then stops, clothes barely warm
|
Thermal Cut-Out Tripping | View Details |
| – |
Dryer stops mid-cycle and display goes blank, then comes back after a while
|
Overheating or Power Interruption | View Details |
| – |
Dryer takes too long to dry, clothes are warm but still damp at end of cycle
|
Restricted Airflow / Partially Blocked Ducts | View Details |
| – |
Dryer trips the household circuit breaker or RCD during operation
|
Electrical Short or Earth Leakage | View Details |
| – |
Dryer vibrates excessively or moves across the floor during operation
|
Imbalance or Leveling Issue | View Details |
| – |
Dryer will not start at all, no lights on the display
|
No Power / Main Supply Fault | View Details |
No matching codes found
Advertisements