Fisher & Paykel

Fisher & Paykel Ovens Error Codes

Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.

Advertisements
F01
Oven will not heat, display shows F01 shortly after a cooking cycle is started.
Oven Temperature Sensor Circuit Fault
F02
Oven overheats, temperature runs away above the set point, display shows F02 or shuts down with an over-temperature warning.
Temperature Sensor Out of Range / Overheat Fault
F03
Oven does not heat and displays F03 shortly after start, fan may run but elements stay cold.
Oven Heating Circuit Failure
F04
Display shows F04 and oven cooling fan runs continuously or fails to run when hot.
Cooling Fan Motor or Feedback Fault
F05
Oven display shows F05 and the door will not lock for pyrolytic self-clean, or unlock after cleaning.
Door Lock Mechanism / Lock Motor Fault
F06
Oven display shows F06 and the touch controls or selector knob are unresponsive or erratic.
User Interface / Touch Panel Communication Fault
F07
Oven display shows F07 and the convection fan does not run, or runs intermittently, causing uneven cooking.
Convection Fan Motor or Feedback Fault
F08
Oven display shows F08 and the internal light does not work, or the oven trips the breaker when the light is turned on.
Oven Lamp Circuit Fault
F09
Oven display shows F09 and the appliance will not start any cooking function.
Power Supply / Low Voltage Fault
F10
Oven display shows F10 and the clock or timer cannot be set, preventing the oven from starting.
Clock / Timer Configuration Fault
F11
Oven display shows F11 and beeps continuously, often after a power surge or lightning storm.
EEPROM / Control Board Memory Fault
F12
Oven display shows F12 and the appliance may be completely unresponsive or stuck in standby.
Communication Fault Between Display Board and Power Board
F13
Oven display shows F13 and the door lock engages unexpectedly or will not engage when required.
Door Lock Position Sensor Fault
F14
Oven display shows F14 and the temperature cannot be adjusted or is displayed incorrectly.
Temperature Calibration / Sensor Range Fault
F15
Oven display shows F15 and the grill/broil function will not operate.
Grill Element Circuit Fault
F16
Oven display shows F16 and the lower bake element does not heat, while other functions may still work.
Lower Bake Element Circuit Fault
F17
Oven display shows F17 and the cooling fan runs at high speed continuously, even when the oven is cold and off.
Cooling Fan Control Circuit Stuck On
F18
Oven display shows F18 and the cavity temperature rises very slowly or not at all in fan-assisted modes.
Convection Element Circuit Fault
F19
Oven display shows F19 and the appliance trips the circuit breaker when a heating function is selected.
Earth Leakage / Short Circuit Fault
F20
Oven display shows F20 and the appliance will not respond to any touch inputs, though the display may be lit.
Touch Panel Key Matrix Fault
Symptom
Oven cabinet or surrounding cabinetry becomes excessively hot to the touch during normal operation.
Cooling / Insulation Inefficiency
Symptom
Oven cavity light and fan turn off when the door is opened during cooking, and the oven stops heating.
Incorrect Door Interlock Behaviour
Symptom
Oven clock loses time or resets to 00:00 after each use or power fluctuation.
Clock Power Retention Fault
Symptom
Oven display is dim, flickering, or some segments are missing, but the oven still heats.
Display / Backlight Degradation
Symptom
Oven does not heat at all, no error code displayed, fan and light may still work.
Complete Heating Failure
Symptom
Oven door glass is cracked or shattered, but the oven still operates.
Door Glass Structural Failure
Symptom
Oven door will not close fully, leaving a gap and causing heat to escape.
Door Hinge / Door Alignment Fault
Symptom
Oven door will not open after a self-clean cycle, no error code displayed.
Door Lock Stuck Closed
Symptom
Oven emits a high-pitched whine or humming noise from the control area during operation.
Electrical / Transformer Noise
Symptom
Oven emits a metallic clicking or popping noise as it heats and cools.
Thermal Expansion Noise
Symptom
Oven emits a strong burning smell or smoke during normal cooking (not first use or after spill).
Overheating / Residue Combustion
Symptom
Oven heats but takes a very long time to reach set temperature, or never quite reaches it.
Reduced Heating Performance
Symptom
Oven interior light does not turn on when the door is opened, but works when manually switched on (if that function exists).
Door Switch Detection Fault
Symptom
Oven interior light stays on all the time, even when the door is closed and the oven is off.
Door Switch or Light Relay Stuck
Symptom
Oven light works and display is on, but the oven will not start heating when a function is selected (no relay click).
Control Logic / Start Inhibit
Symptom
Oven makes loud banging, rattling, or scraping noises when the convection fan is running.
Convection Fan Mechanical Noise
Symptom
Oven overheats and burns food even when set to a moderate temperature, no error code shown.
Thermostat / Sensor Control Failure
Symptom
Oven produces excessive condensation on the door and control panel during cooking.
Ventilation / Steam Management Issue
Symptom
Oven trips the household RCD or GFCI intermittently, especially when heating up or during steam-heavy cooking.
Intermittent Earth Leakage
Advertisements