Bagotte
Bagotte Robot Vacuums Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Robot vacuum will not start cleaning and app or voice prompt reports E1 error.
Main Brush Motor Overload / Stall
E10
Robot vacuum shows E10 and will not start; often associated with battery or power issues.
Battery Pack / Power Supply Error
E11
Robot vacuum reports E11 and may stop when transitioning between floor types or climbing thresholds.
Wheel Height / Lift Sensor Error
E12
Robot vacuum announces E12 and stops, often when starting or during navigation.
Obstacle / Wall Sensor Error
E13
Robot vacuum shows E13 and may shut down unexpectedly during cleaning.
Overcurrent / General Motor Protection
E14
Robot vacuum reports E14 and cannot connect properly to Wi‑Fi or the mobile app.
Wi‑Fi Module / Communication Error
E15
Robot vacuum shows E15 and refuses to start mapping or smart navigation features.
LDS / Laser or Camera Navigation Sensor Error (for mapping models)
E16
Robot vacuum reports E16 and may stop when using the mopping function (on hybrid Bagotte models).
Water Tank / Mop Module Detection Error
E2
Robot stops shortly after starting and reports E2 error via app or voice prompt.
Side Brush Motor Overload / Stall
E3
Robot vacuum announces E3 or shows E3 in the app and stops moving shortly after starting.
Drive Wheel Motor Overload / Wheel Jam
E4
Robot reports E4 and stops, often near edges or obstacles.
Cliff Sensor Error / Obstruction
E5
Robot vacuum stops and reports E5, often when approaching the charging dock or walls.
Front Bumper / Collision Sensor Fault
E6
Robot announces E6 or shows E6 in the app and refuses to start cleaning.
Dust Bin Not Installed / Dust Bin Sensor Error
E7
Robot vacuum reports E7 and may stop near the dock or fail to charge properly.
Charging Contact / Docking Error
E8
Robot stops and reports E8, often when suction is weak or the bin is full.
Fan Motor / Suction System Overload
E9
Robot vacuum reports E9 and may move erratically or spin in circles.
Gyroscope / Orientation Sensor Error
Symptom
Robot powers on but shuts off after a few minutes of cleaning, even after a full charge.
Battery Capacity Degradation
Symptom
Robot vacuum cannot connect to the mobile app even though Wi‑Fi setup appears correct.
App Connectivity / Cloud Communication Issue
Symptom
Robot vacuum does not detect or avoid virtual walls or magnetic boundary strips (if supported).
Boundary Detection Failure
Symptom
Robot vacuum does not dispense any water during mopping; floor remains dry.
No Water Flow from Tank
Symptom
Robot vacuum does not power on at all; no lights, no sounds, even when placed on the dock.
Complete Power Loss
Symptom
Robot vacuum does not respond to the physical buttons on top or on the body.
Keypad / Button Panel Failure
Symptom
Robot vacuum does not return to the charging dock automatically and stops in random locations.
Docking / Homing Failure
Symptom
Robot vacuum emits a burning smell or very hot air from the exhaust during operation.
Overheating Motor or Electrical Component
Symptom
Robot vacuum frequently gets stuck on low thresholds, rugs, or cords.
Poor Obstacle Clearance / Traction
Symptom
Robot vacuum frequently reports that the dust bin is full even after emptying, or stops with the bin icon lit.
Dust Bin Full Detection Fault
Symptom
Robot vacuum is unusually quiet and appears to move but picks up almost no debris.
Fan Motor Not Running
Symptom
Robot vacuum is very loud during operation, with a high-pitched whine or grinding noise.
Noisy Fan Motor or Brush Drive
Symptom
Robot vacuum leaves lines of dirt and hair on the floor, especially behind it.
Main Brush or Dust Bin Ineffective Pickup
Symptom
Robot vacuum leaves streaks of water or puddles when using the mopping function.
Excessive Water Dispensing
Symptom
Robot vacuum makes loud clicking or knocking noises when moving or turning.
Drive Wheel or Gearbox Noise
Symptom
Robot vacuum maps rooms incorrectly or forgets the map frequently on mapping-capable Bagotte models.
Mapping / Memory Retention Issue
Symptom
Robot vacuum randomly reboots or restarts during cleaning without any error message.
Intermittent Power / Main Board Fault
Symptom
Robot vacuum runs but has very weak suction and leaves debris behind.
Reduced Suction Performance
Symptom
Robot vacuum spins in circles or constantly veers to one side while cleaning.
Directional Control / Wheel Speed Imbalance
Symptom
Robot vacuum stops immediately when lifted slightly or when crossing dark-colored floors.
Overly Sensitive Cliff Sensors
Symptom
Robot vacuum’s main brush does not rotate, but suction and movement work normally.
Main Brush Drive Failure Without Error
Symptom
Robot vacuum’s side brush does not spin, but no specific error code is shown.
Side Brush Non-Functional Without Error
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Robot vacuum will not start cleaning and app or voice prompt reports E1 error.
|
Main Brush Motor Overload / Stall | View Details |
| E10 |
Robot vacuum shows E10 and will not start; often associated with battery or power issues.
|
Battery Pack / Power Supply Error | View Details |
| E11 |
Robot vacuum reports E11 and may stop when transitioning between floor types or climbing thresholds.
|
Wheel Height / Lift Sensor Error | View Details |
| E12 |
Robot vacuum announces E12 and stops, often when starting or during navigation.
|
Obstacle / Wall Sensor Error | View Details |
| E13 |
Robot vacuum shows E13 and may shut down unexpectedly during cleaning.
|
Overcurrent / General Motor Protection | View Details |
| E14 |
Robot vacuum reports E14 and cannot connect properly to Wi‑Fi or the mobile app.
|
Wi‑Fi Module / Communication Error | View Details |
| E15 |
Robot vacuum shows E15 and refuses to start mapping or smart navigation features.
|
LDS / Laser or Camera Navigation Sensor Error (for mapping models) | View Details |
| E16 |
Robot vacuum reports E16 and may stop when using the mopping function (on hybrid Bagotte models).
|
Water Tank / Mop Module Detection Error | View Details |
| E2 |
Robot stops shortly after starting and reports E2 error via app or voice prompt.
|
Side Brush Motor Overload / Stall | View Details |
| E3 |
Robot vacuum announces E3 or shows E3 in the app and stops moving shortly after starting.
|
Drive Wheel Motor Overload / Wheel Jam | View Details |
| E4 |
Robot reports E4 and stops, often near edges or obstacles.
|
Cliff Sensor Error / Obstruction | View Details |
| E5 |
Robot vacuum stops and reports E5, often when approaching the charging dock or walls.
|
Front Bumper / Collision Sensor Fault | View Details |
| E6 |
Robot announces E6 or shows E6 in the app and refuses to start cleaning.
|
Dust Bin Not Installed / Dust Bin Sensor Error | View Details |
| E7 |
Robot vacuum reports E7 and may stop near the dock or fail to charge properly.
|
Charging Contact / Docking Error | View Details |
| E8 |
Robot stops and reports E8, often when suction is weak or the bin is full.
|
Fan Motor / Suction System Overload | View Details |
| E9 |
Robot vacuum reports E9 and may move erratically or spin in circles.
|
Gyroscope / Orientation Sensor Error | View Details |
| – |
Robot powers on but shuts off after a few minutes of cleaning, even after a full charge.
|
Battery Capacity Degradation | View Details |
| – |
Robot vacuum cannot connect to the mobile app even though Wi‑Fi setup appears correct.
|
App Connectivity / Cloud Communication Issue | View Details |
| – |
Robot vacuum does not detect or avoid virtual walls or magnetic boundary strips (if supported).
|
Boundary Detection Failure | View Details |
| – |
Robot vacuum does not dispense any water during mopping; floor remains dry.
|
No Water Flow from Tank | View Details |
| – |
Robot vacuum does not power on at all; no lights, no sounds, even when placed on the dock.
|
Complete Power Loss | View Details |
| – |
Robot vacuum does not respond to the physical buttons on top or on the body.
|
Keypad / Button Panel Failure | View Details |
| – |
Robot vacuum does not return to the charging dock automatically and stops in random locations.
|
Docking / Homing Failure | View Details |
| – |
Robot vacuum emits a burning smell or very hot air from the exhaust during operation.
|
Overheating Motor or Electrical Component | View Details |
| – |
Robot vacuum frequently gets stuck on low thresholds, rugs, or cords.
|
Poor Obstacle Clearance / Traction | View Details |
| – |
Robot vacuum frequently reports that the dust bin is full even after emptying, or stops with the bin icon lit.
|
Dust Bin Full Detection Fault | View Details |
| – |
Robot vacuum is unusually quiet and appears to move but picks up almost no debris.
|
Fan Motor Not Running | View Details |
| – |
Robot vacuum is very loud during operation, with a high-pitched whine or grinding noise.
|
Noisy Fan Motor or Brush Drive | View Details |
| – |
Robot vacuum leaves lines of dirt and hair on the floor, especially behind it.
|
Main Brush or Dust Bin Ineffective Pickup | View Details |
| – |
Robot vacuum leaves streaks of water or puddles when using the mopping function.
|
Excessive Water Dispensing | View Details |
| – |
Robot vacuum makes loud clicking or knocking noises when moving or turning.
|
Drive Wheel or Gearbox Noise | View Details |
| – |
Robot vacuum maps rooms incorrectly or forgets the map frequently on mapping-capable Bagotte models.
|
Mapping / Memory Retention Issue | View Details |
| – |
Robot vacuum randomly reboots or restarts during cleaning without any error message.
|
Intermittent Power / Main Board Fault | View Details |
| – |
Robot vacuum runs but has very weak suction and leaves debris behind.
|
Reduced Suction Performance | View Details |
| – |
Robot vacuum spins in circles or constantly veers to one side while cleaning.
|
Directional Control / Wheel Speed Imbalance | View Details |
| – |
Robot vacuum stops immediately when lifted slightly or when crossing dark-colored floors.
|
Overly Sensitive Cliff Sensors | View Details |
| – |
Robot vacuum’s main brush does not rotate, but suction and movement work normally.
|
Main Brush Drive Failure Without Error | View Details |
| – |
Robot vacuum’s side brush does not spin, but no specific error code is shown.
|
Side Brush Non-Functional Without Error | View Details |
No matching codes found
Advertisements