Teka Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Washer-dryer will not start a cycle; display shows E01 and door symbol may flash.
Door Lock Failure
E02
Washer-dryer does not fill with water or fills very slowly; E02 appears on the display.
Water Inlet Timeout / Fill Error
E03
Washer-dryer does not drain water; cycle stops with water in drum and E03 on display.
Drain Pump Timeout / Drain Error
E04
Washer-dryer overfills or shows E04 shortly after starting; may attempt to drain immediately.
Overflow / Water Level Sensor Error
E05
Washer-dryer does not heat water; cycles take unusually long and E05 appears.
Water Heating Circuit Failure
E06
Washer-dryer stops during spin or will not spin; E06 is displayed.
Motor / Tachometer Feedback Error
E07
Drying function does not start or stops quickly; E07 appears on the display.
Dryer Heating Circuit Failure
E08
Washer-dryer shows E08 and may not start or may stop mid-cycle; sometimes associated with door or safety issues.
General Safety / Door Lock or Control Error
E09
Washer-dryer stops and displays E09; may be associated with motor not turning or tripping breaker.
Motor Power Circuit / Triac Failure
E10
Washer-dryer shows E10 and may not proceed with cycle; often related to water level or fill issues.
Water Level Detection Error
E11
Washer-dryer displays E11; drying cycle may not start or may stop prematurely.
Dryer Temperature Sensor (NTC) Error
E12
Washer-dryer shows E12 during drying; clothes remain damp and machine may feel hot.
Dryer Overheating / Airflow Restriction
E13
Washer-dryer displays E13; may be associated with water detected in base or leak protection activation.
Leak / Anti-Flood System Activated
E14
Washer-dryer shows E14; may not start or may stop unexpectedly, often linked to power issues.
Power Supply / Voltage Error
E15
Washer-dryer displays E15; control panel may be unresponsive or behave erratically.
User Interface / Communication Error
E16
Washer-dryer shows E16; often associated with door not locking or unlocking correctly.
Door Unlock Error
E17
Washer-dryer displays E17; may be related to excessive foam or imbalance.
Foam / Unbalance Detection Error
E18
Washer-dryer shows E18; water remains in drum and cycle may not complete.
Drain Time Exceeded / Partial Blockage
E19
Washer-dryer displays E19; may be associated with detergent drawer or water distribution issues.
Detergent Dispenser / Water Distribution Valve Error
E20
Washer-dryer shows E20; may not start drying or may stop with wet clothes.
Condenser Pump / Drying Water Pump Error (on condenser-type combos)
Symptom
Detergent remains in the drawer compartments after the wash cycle.
Poor Detergent Flushing
Symptom
Drying cycle completes but clothes are still damp or wet.
Poor Drying Performance
Symptom
Washer-dryer combo will not power on at all; no lights or display.
No Power / Dead Appliance
Symptom
Washer-dryer display or LEDs flicker or reset during operation.
Intermittent Power / Electrical Noise
Symptom
Washer-dryer does not drain completely; small amount of water remains in drum after cycle.
Partial Drain / Residual Water
Symptom
Washer-dryer door will not open at the end of the cycle; no error code shown.
Door Stuck / Lock Not Releasing
Symptom
Washer-dryer drum is very hard to turn by hand or makes grinding noises when rotated.
Drum Bearing or Foreign Object Interference
Symptom
Washer-dryer emits a burning smell during wash or spin.
Overheating Component / Friction
Symptom
Washer-dryer emits a strong musty or moldy odor from the drum or door area.
Biofilm / Mold Build-up
Symptom
Washer-dryer fills and drains but drum does not rotate during wash or spin.
Drum Not Turning / Motor Drive Failure
Symptom
Washer-dryer frequently trips the household circuit breaker or RCD during operation.
Electrical Short or Earth Leakage
Symptom
Washer-dryer leaves clothes very wet at the end of the cycle; spin seems weak.
Poor Spin Performance / Unbalance Control
Symptom
Washer-dryer makes a high-pitched squealing noise during spin.
Belt or Pulley Squeal
Symptom
Washer-dryer makes very loud banging or knocking noises during spin.
Excessive Vibration / Suspension Failure
Symptom
Washer-dryer powers on but will not start any program; Start button unresponsive.
Control Lock / User Interface Fault
Symptom
Washer-dryer takes much longer than the displayed time to complete cycles.
Extended Cycle Time / Auto-Adjustment
Symptom
Water leaking from the bottom or rear of the washer-dryer during wash or drain.
Internal Hose or Pump Leak
Symptom
Water leaking from the front of the washer-dryer, often around the door area.
Door Seal Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Washer-dryer will not start a cycle; display shows E01 and door symbol may flash.
|
Door Lock Failure | View Details |
| E02 |
Washer-dryer does not fill with water or fills very slowly; E02 appears on the display.
|
Water Inlet Timeout / Fill Error | View Details |
| E03 |
Washer-dryer does not drain water; cycle stops with water in drum and E03 on display.
|
Drain Pump Timeout / Drain Error | View Details |
| E04 |
Washer-dryer overfills or shows E04 shortly after starting; may attempt to drain immediately.
|
Overflow / Water Level Sensor Error | View Details |
| E05 |
Washer-dryer does not heat water; cycles take unusually long and E05 appears.
|
Water Heating Circuit Failure | View Details |
| E06 |
Washer-dryer stops during spin or will not spin; E06 is displayed.
|
Motor / Tachometer Feedback Error | View Details |
| E07 |
Drying function does not start or stops quickly; E07 appears on the display.
|
Dryer Heating Circuit Failure | View Details |
| E08 |
Washer-dryer shows E08 and may not start or may stop mid-cycle; sometimes associated with door or safety issues.
|
General Safety / Door Lock or Control Error | View Details |
| E09 |
Washer-dryer stops and displays E09; may be associated with motor not turning or tripping breaker.
|
Motor Power Circuit / Triac Failure | View Details |
| E10 |
Washer-dryer shows E10 and may not proceed with cycle; often related to water level or fill issues.
|
Water Level Detection Error | View Details |
| E11 |
Washer-dryer displays E11; drying cycle may not start or may stop prematurely.
|
Dryer Temperature Sensor (NTC) Error | View Details |
| E12 |
Washer-dryer shows E12 during drying; clothes remain damp and machine may feel hot.
|
Dryer Overheating / Airflow Restriction | View Details |
| E13 |
Washer-dryer displays E13; may be associated with water detected in base or leak protection activation.
|
Leak / Anti-Flood System Activated | View Details |
| E14 |
Washer-dryer shows E14; may not start or may stop unexpectedly, often linked to power issues.
|
Power Supply / Voltage Error | View Details |
| E15 |
Washer-dryer displays E15; control panel may be unresponsive or behave erratically.
|
User Interface / Communication Error | View Details |
| E16 |
Washer-dryer shows E16; often associated with door not locking or unlocking correctly.
|
Door Unlock Error | View Details |
| E17 |
Washer-dryer displays E17; may be related to excessive foam or imbalance.
|
Foam / Unbalance Detection Error | View Details |
| E18 |
Washer-dryer shows E18; water remains in drum and cycle may not complete.
|
Drain Time Exceeded / Partial Blockage | View Details |
| E19 |
Washer-dryer displays E19; may be associated with detergent drawer or water distribution issues.
|
Detergent Dispenser / Water Distribution Valve Error | View Details |
| E20 |
Washer-dryer shows E20; may not start drying or may stop with wet clothes.
|
Condenser Pump / Drying Water Pump Error (on condenser-type combos) | View Details |
| – |
Detergent remains in the drawer compartments after the wash cycle.
|
Poor Detergent Flushing | View Details |
| – |
Drying cycle completes but clothes are still damp or wet.
|
Poor Drying Performance | View Details |
| – |
Washer-dryer combo will not power on at all; no lights or display.
|
No Power / Dead Appliance | View Details |
| – |
Washer-dryer display or LEDs flicker or reset during operation.
|
Intermittent Power / Electrical Noise | View Details |
| – |
Washer-dryer does not drain completely; small amount of water remains in drum after cycle.
|
Partial Drain / Residual Water | View Details |
| – |
Washer-dryer door will not open at the end of the cycle; no error code shown.
|
Door Stuck / Lock Not Releasing | View Details |
| – |
Washer-dryer drum is very hard to turn by hand or makes grinding noises when rotated.
|
Drum Bearing or Foreign Object Interference | View Details |
| – |
Washer-dryer emits a burning smell during wash or spin.
|
Overheating Component / Friction | View Details |
| – |
Washer-dryer emits a strong musty or moldy odor from the drum or door area.
|
Biofilm / Mold Build-up | View Details |
| – |
Washer-dryer fills and drains but drum does not rotate during wash or spin.
|
Drum Not Turning / Motor Drive Failure | View Details |
| – |
Washer-dryer frequently trips the household circuit breaker or RCD during operation.
|
Electrical Short or Earth Leakage | View Details |
| – |
Washer-dryer leaves clothes very wet at the end of the cycle; spin seems weak.
|
Poor Spin Performance / Unbalance Control | View Details |
| – |
Washer-dryer makes a high-pitched squealing noise during spin.
|
Belt or Pulley Squeal | View Details |
| – |
Washer-dryer makes very loud banging or knocking noises during spin.
|
Excessive Vibration / Suspension Failure | View Details |
| – |
Washer-dryer powers on but will not start any program; Start button unresponsive.
|
Control Lock / User Interface Fault | View Details |
| – |
Washer-dryer takes much longer than the displayed time to complete cycles.
|
Extended Cycle Time / Auto-Adjustment | View Details |
| – |
Water leaking from the bottom or rear of the washer-dryer during wash or drain.
|
Internal Hose or Pump Leak | View Details |
| – |
Water leaking from the front of the washer-dryer, often around the door area.
|
Door Seal Leak | View Details |
No matching codes found
Advertisements