Amica Dryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dryer will not start; display shows E01 and cycle cannot be selected or started.
Door Lock / Door Switch Fault
E02
Dryer stops shortly after start or will not start; E02 appears on the display.
Water Tank Full / Condensate Level Sensor Fault
E03
Dryer stops mid-cycle, clothes remain wet, and E03 is displayed.
Drain Pump / Condensate Pump Fault (Heat Pump or Condenser Models)
E04
Dryer stops, beeps, and shows E04; cycle ends prematurely with damp laundry.
NTC Temperature Sensor Fault (Drum / Exhaust NTC)
E05
Dryer does not heat properly or overheats; E05 appears on the display.
Heater Circuit Fault / Overheat Protection Triggered
E06
Dryer drum does not rotate; E06 is displayed shortly after starting a program.
Drive Motor / Motor Control Fault
E07
Dryer stops and displays E07; sometimes accompanied by unusual noises from the drum area.
Drum Position / Rotation Sensor Fault (Tacho / Hall Sensor)
E08
Dryer stops with E08; often associated with very long drying times or no heating on heat pump models.
Heat Pump System Fault (Compressor / Refrigerant Circuit)
E09
Dryer does not heat; E09 is displayed shortly after program start.
Heater Relay / Power Supply Fault
E10
Dryer stops and shows E10; may occur at the beginning of the cycle with no drum movement.
Power Supply / Voltage Detection Fault
E11
Dryer displays E11 and may not respond to button presses or program selection.
User Interface / Control Panel Communication Fault
E12
Dryer shows E12 and may stop heating or terminate the cycle early.
Humidity Sensor / Dryness Sensor Fault
E13
Dryer stops and displays E13; may be accompanied by water in the base tray on condenser/heat pump models.
Leakage / Overflow Protection Fault
E14
Dryer displays E14 and may not start or may shut down unexpectedly.
Overheating / Airflow Restriction Fault
E15
Dryer shows E15; may be associated with erratic temperature control or immediate shutdown.
Secondary NTC / Ambient Temperature Sensor Fault
E16
Dryer displays E16 and may not respond correctly to program selection or door status.
Internal Communication / Sensor Bus Fault
E17
Dryer shows E17; may be associated with door locking/unlocking issues during or after the cycle.
Door Lock Actuator / Interlock Fault
E18
Dryer displays E18; may be associated with sensor drying programs not working correctly.
Dryness Level Calibration / Sensor Error
E19
Dryer shows E19 and may not start or may stop unexpectedly.
Internal Memory / EEPROM Fault
Symptom
Dryer display works but some buttons do not respond or respond intermittently.
Control Panel Button / Touchpad Failure
Symptom
Dryer door glass or metal front panel becomes excessively hot to the touch during drying.
Front Panel Overheating
Symptom
Dryer door is difficult to open after the cycle or pops open during operation.
Door Latch / Hinge Misalignment
Symptom
Dryer drum does not turn, but the motor can be heard humming or the dryer stops shortly after start (no code).
Broken or Slipping Drive Belt
Symptom
Dryer emits a burning smell during operation (no error code).
Overheating Due to Lint Buildup or Electrical Fault
Symptom
Dryer emits a high-pitched whine or whistle from the air outlet during operation.
Airflow Noise / Fan or Duct Restriction
Symptom
Dryer interior light does not work, but the dryer otherwise operates normally.
Drum Light Circuit Failure
Symptom
Dryer leaks water onto the floor during or after the cycle (condenser/heat pump models, no error code).
Condensate Leak
Symptom
Dryer makes loud squealing or screeching noises during operation (no error code).
Drum Support Roller / Idler Pulley Wear
Symptom
Dryer powers on but will not start when the Start button is pressed; a clicking sound may be heard.
Start Circuit / Safety Interlock Issue
Symptom
Dryer produces a low rumbling or grinding noise that gets worse over time (no error code).
Rear Drum Bearing Wear
Symptom
Dryer runs but clothes come out very wrinkled and hot, even on gentle programs.
Temperature Control / Overdrying
Symptom
Dryer runs but does not heat; clothes remain cold and wet at the end of the cycle (no error code displayed).
Heating System Failure Without Error
Symptom
Dryer runs only for a few minutes and then stops, showing 'End' or similar, with laundry still wet.
Premature Cycle Termination
Symptom
Dryer stops mid-cycle and will not resume until it cools down; exterior may feel hot.
Overheating / Thermal Cut-Out Tripping
Symptom
Dryer stops with a beeping sound and indicates that the water tank is full, but the tank is empty (no numeric error code).
False Water Tank Full Indication
Symptom
Dryer takes very long to dry or never reaches the selected dryness level; clothes are warm but still damp (no error code).
Restricted Airflow / Inefficient Drying
Symptom
Dryer vibrates excessively or moves across the floor during operation (no error code).
Cabinet Vibration / Imbalance
Symptom
Dryer will not start; all lights are off and the display is blank.
No Power / Dead Appliance
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dryer will not start; display shows E01 and cycle cannot be selected or started.
|
Door Lock / Door Switch Fault | View Details |
| E02 |
Dryer stops shortly after start or will not start; E02 appears on the display.
|
Water Tank Full / Condensate Level Sensor Fault | View Details |
| E03 |
Dryer stops mid-cycle, clothes remain wet, and E03 is displayed.
|
Drain Pump / Condensate Pump Fault (Heat Pump or Condenser Models) | View Details |
| E04 |
Dryer stops, beeps, and shows E04; cycle ends prematurely with damp laundry.
|
NTC Temperature Sensor Fault (Drum / Exhaust NTC) | View Details |
| E05 |
Dryer does not heat properly or overheats; E05 appears on the display.
|
Heater Circuit Fault / Overheat Protection Triggered | View Details |
| E06 |
Dryer drum does not rotate; E06 is displayed shortly after starting a program.
|
Drive Motor / Motor Control Fault | View Details |
| E07 |
Dryer stops and displays E07; sometimes accompanied by unusual noises from the drum area.
|
Drum Position / Rotation Sensor Fault (Tacho / Hall Sensor) | View Details |
| E08 |
Dryer stops with E08; often associated with very long drying times or no heating on heat pump models.
|
Heat Pump System Fault (Compressor / Refrigerant Circuit) | View Details |
| E09 |
Dryer does not heat; E09 is displayed shortly after program start.
|
Heater Relay / Power Supply Fault | View Details |
| E10 |
Dryer stops and shows E10; may occur at the beginning of the cycle with no drum movement.
|
Power Supply / Voltage Detection Fault | View Details |
| E11 |
Dryer displays E11 and may not respond to button presses or program selection.
|
User Interface / Control Panel Communication Fault | View Details |
| E12 |
Dryer shows E12 and may stop heating or terminate the cycle early.
|
Humidity Sensor / Dryness Sensor Fault | View Details |
| E13 |
Dryer stops and displays E13; may be accompanied by water in the base tray on condenser/heat pump models.
|
Leakage / Overflow Protection Fault | View Details |
| E14 |
Dryer displays E14 and may not start or may shut down unexpectedly.
|
Overheating / Airflow Restriction Fault | View Details |
| E15 |
Dryer shows E15; may be associated with erratic temperature control or immediate shutdown.
|
Secondary NTC / Ambient Temperature Sensor Fault | View Details |
| E16 |
Dryer displays E16 and may not respond correctly to program selection or door status.
|
Internal Communication / Sensor Bus Fault | View Details |
| E17 |
Dryer shows E17; may be associated with door locking/unlocking issues during or after the cycle.
|
Door Lock Actuator / Interlock Fault | View Details |
| E18 |
Dryer displays E18; may be associated with sensor drying programs not working correctly.
|
Dryness Level Calibration / Sensor Error | View Details |
| E19 |
Dryer shows E19 and may not start or may stop unexpectedly.
|
Internal Memory / EEPROM Fault | View Details |
| – |
Dryer display works but some buttons do not respond or respond intermittently.
|
Control Panel Button / Touchpad Failure | View Details |
| – |
Dryer door glass or metal front panel becomes excessively hot to the touch during drying.
|
Front Panel Overheating | View Details |
| – |
Dryer door is difficult to open after the cycle or pops open during operation.
|
Door Latch / Hinge Misalignment | View Details |
| – |
Dryer drum does not turn, but the motor can be heard humming or the dryer stops shortly after start (no code).
|
Broken or Slipping Drive Belt | View Details |
| – |
Dryer emits a burning smell during operation (no error code).
|
Overheating Due to Lint Buildup or Electrical Fault | View Details |
| – |
Dryer emits a high-pitched whine or whistle from the air outlet during operation.
|
Airflow Noise / Fan or Duct Restriction | View Details |
| – |
Dryer interior light does not work, but the dryer otherwise operates normally.
|
Drum Light Circuit Failure | View Details |
| – |
Dryer leaks water onto the floor during or after the cycle (condenser/heat pump models, no error code).
|
Condensate Leak | View Details |
| – |
Dryer makes loud squealing or screeching noises during operation (no error code).
|
Drum Support Roller / Idler Pulley Wear | View Details |
| – |
Dryer powers on but will not start when the Start button is pressed; a clicking sound may be heard.
|
Start Circuit / Safety Interlock Issue | View Details |
| – |
Dryer produces a low rumbling or grinding noise that gets worse over time (no error code).
|
Rear Drum Bearing Wear | View Details |
| – |
Dryer runs but clothes come out very wrinkled and hot, even on gentle programs.
|
Temperature Control / Overdrying | View Details |
| – |
Dryer runs but does not heat; clothes remain cold and wet at the end of the cycle (no error code displayed).
|
Heating System Failure Without Error | View Details |
| – |
Dryer runs only for a few minutes and then stops, showing 'End' or similar, with laundry still wet.
|
Premature Cycle Termination | View Details |
| – |
Dryer stops mid-cycle and will not resume until it cools down; exterior may feel hot.
|
Overheating / Thermal Cut-Out Tripping | View Details |
| – |
Dryer stops with a beeping sound and indicates that the water tank is full, but the tank is empty (no numeric error code).
|
False Water Tank Full Indication | View Details |
| – |
Dryer takes very long to dry or never reaches the selected dryness level; clothes are warm but still damp (no error code).
|
Restricted Airflow / Inefficient Drying | View Details |
| – |
Dryer vibrates excessively or moves across the floor during operation (no error code).
|
Cabinet Vibration / Imbalance | View Details |
| – |
Dryer will not start; all lights are off and the display is blank.
|
No Power / Dead Appliance | View Details |
No matching codes found
Advertisements