Kraus

Kraus Garbage Disposals Error Codes

Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.

Advertisements
E1
Kraus garbage disposal will not power on; wall switch is on but unit is completely dead and silent.
Line Power or Control Circuit Interruption
E10
Kraus garbage disposal leaks from the top where it connects to the sink drain opening.
Sink Flange Seal Failure
E11
Kraus garbage disposal leaks from the side discharge connection where it connects to the drain pipe.
Discharge Elbow Seal Leak
E12
Kraus garbage disposal leaks from the bottom of the unit, even when not running.
Internal Seal Failure / Cracked Housing
E13
Kraus garbage disposal leaks from the dishwasher inlet connection on the side of the unit.
Dishwasher Inlet Hose Seal Leak
E14
Kraus garbage disposal will not turn on using the air switch (for models installed with a countertop air switch).
Air Switch Actuation Failure
E15
Kraus garbage disposal runs continuously and does not turn off when the wall switch is turned off (for batch-feed or miswired units).
Control or Switch Miswiring
E16
Kraus garbage disposal makes a clicking sound but does not start; sometimes starts after multiple attempts.
Sticking Start Mechanism / Weak Motor
E17
Kraus garbage disposal stops abruptly during operation and will not restart until reset.
Thermal Overload Trip
E18
Kraus garbage disposal is extremely loud compared to when it was new, even with no foreign objects present.
Worn or Loose Internal Components
E19
Kraus garbage disposal causes lights to dim or flicker when starting.
High Inrush Current / Shared Circuit Load
E2
Kraus garbage disposal hums when switched on but the grinding plate does not spin.
Impeller Plate Jam / Rotor Locked
E20
Kraus garbage disposal emits a persistent foul odor even after running with water.
Organic Buildup in Grinding Chamber and Drain
E21
Kraus garbage disposal backs up into the opposite sink bowl in a double-bowl sink.
Improper Drain Configuration / Partial Blockage
E22
Kraus garbage disposal will not accept food easily; food bounces on the splash guard and does not enter the chamber.
Restricted Inlet / Stiff Splash Guard
E23
Kraus garbage disposal causes water to leak from the sink rim when operating at high speed.
Back-Splashing and Poor Seal at Sink Rim
E24
Kraus garbage disposal intermittently fails to start; sometimes works after tapping the unit lightly.
Intermittent Electrical Connection or Internal Fault
E25
Kraus garbage disposal runs but does not grind food effectively; large pieces remain unprocessed.
Dull or Worn Grinding Components
E26
Kraus garbage disposal splashes water and food particles back out of the sink opening during use.
Excessive Back-Splash from Chamber
E27
Kraus garbage disposal makes a low rumbling noise and seems to wobble slightly but still grinds.
Minor Imbalance or Foreign Debris
E28
Kraus garbage disposal does not run, but a faint buzzing is heard from the outlet or switch area.
Switch or Outlet Contact Issue
E29
Kraus garbage disposal runs but water leaks only when the dishwasher is draining.
Backflow or Overpressure from Dishwasher Drain
E3
Kraus garbage disposal trips the red reset button frequently or shuts off after a few seconds of operation.
Motor Overload / Thermal Protector Tripping
E30
Kraus garbage disposal is new and installed, but when turned on, only a humming sound is heard and the reset button is not tripped.
Installation Jam or Shipping Debris
E4
Kraus garbage disposal runs but water backs up into the sink and does not drain through the unit.
Discharge Blockage / Restricted Outlet
E5
Kraus garbage disposal trips the GFCI outlet or circuit breaker immediately when turned on.
Ground Fault or Short Circuit in Disposal
E6
Kraus garbage disposal runs but makes a loud metallic grinding or rattling noise.
Foreign Object in Grinding Chamber
E7
Kraus garbage disposal vibrates excessively and causes the sink or countertop to shake during operation.
Imbalanced Grinding Plate or Loose Mount
E8
Kraus garbage disposal emits a burning smell or smoke during or immediately after use.
Motor Overheating / Insulation Breakdown
E9
Kraus garbage disposal runs but produces a high-pitched squeal or screeching noise.
Bearing Wear or Metal-on-Metal Contact
Symptom
Kraus garbage disposal causes a noticeable electrical shock or tingle when touching the sink or unit.
Grounding Fault / Stray Voltage
Symptom
Kraus garbage disposal is difficult to remove from the mounting assembly during replacement or service.
Seized or Corroded Mounting Ring
Symptom
Kraus garbage disposal makes a rattling noise only when the dishwasher is draining.
Dishwasher Discharge Turbulence
Symptom
Kraus garbage disposal mounting assembly moves or flexes when the unit is running.
Loose or Improperly Installed Mounting Hardware
Symptom
Kraus garbage disposal produces a chattering or rapid on-off sound when the switch is flipped.
Loose Electrical Connection or Failing Switch
Symptom
Kraus garbage disposal runs but water drains very slowly from the sink.
Partial Drain Obstruction
Symptom
Kraus garbage disposal will not start at all; no sound, but other outlets in the kitchen work.
Local Power Supply or Switch Failure
Advertisements