Gorenje Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F1
Oven does not heat, display shows F1 shortly after turning on any heating function.
Oven Temperature Sensor (NTC) Fault
F10
Oven display shows F10 and the touch controls or buttons do not respond correctly.
User Interface / Touch Control Fault
F11
Oven display shows F11 and the clock/timer functions may be frozen or reset repeatedly.
Clock / Timer Circuit Fault
F12
Oven display shows F12 and some heating modes (e.g., grill or bottom heat) are unavailable.
Heating Element Selection / Relay Fault
F13
Oven display shows F13 during pyrolytic self-cleaning; cycle aborts and door may remain locked.
Pyrolytic Temperature / Safety Fault
F14
Oven display shows F14 and steam-assisted or moisture functions do not work (on steam-enabled Gorenje ovens).
Steam Generator / Water System Fault
F15
Oven display shows F15 and interior light does not work or stays on permanently.
Oven Lamp / Light Circuit Fault
F16
Oven display shows F16 and the telescopic or motorized control knobs (on some models) do not extend or retract.
Control Knob Motor / Position Sensor Fault
F17
Oven display shows F17 and child lock or safety lock cannot be activated or deactivated.
Child Lock / Safety Lock Logic Fault
F18
Oven display shows F18 and the meat probe or core temperature sensor function does not work (on probe-equipped models).
Meat Probe / Core Temperature Sensor Fault
F2
Oven overheats, may shut off or lock, display shows F2 during or shortly after a heating cycle.
Overtemperature / Sensor Calibration Fault
F3
Oven does not heat correctly, display shows F3, sometimes accompanied by erratic temperature swings.
Temperature Sensor Circuit Intermittent / Out of Range
F4
Oven stops heating mid-cycle, display shows F4, sometimes accompanied by a clicking relay sound.
Oven Heating Circuit Fault
F5
Oven fan does not run or runs erratically, display shows F5 when a fan-assisted mode is selected.
Convection Fan Motor / Feedback Fault
F6
Display shows F6 and oven functions are disabled or limited; sometimes appears after a power surge.
Electronic Control Board Communication / Internal Error
F7
Oven display shows F7 and the door lock may engage or remain locked, especially during or after pyrolytic self-cleaning.
Door Lock / Latch System Fault
F8
Oven display shows F8 and the cooling fan at the top rear does not run or runs continuously.
Cooling Fan Circuit Fault
F9
Display shows F9 and oven functions are disabled; may occur after a short circuit or wiring issue.
Power Supply / Line Voltage Fault
Symptom
Grill function does not work; other oven functions heat normally.
Grill Heating Circuit Failure
Symptom
Oven clock and settings reset every time power is turned off or after brief outages.
Clock Memory / Backup Failure
Symptom
Oven cooling fan continues to run for an excessively long time after the oven is turned off.
Cooling Fan Control / Thermostat Issue
Symptom
Oven display and controls work, but the oven cannot be started; pressing Start has no effect.
Start Circuit / Safety Interlock Issue
Symptom
Oven does not heat at all in any mode; fan and light may work but no warmth is produced.
Main Heating Circuit Failure
Symptom
Oven door glass is loose, rattling, or has condensation between inner and outer panes.
Door Glass Assembly / Seal Failure
Symptom
Oven door will not close fully or pops open slightly during operation.
Door Hinge / Latch Misalignment
Symptom
Oven door will not open after cooking (not in pyrolytic mode) and no error code is shown.
Mechanical Door Latch Jam
Symptom
Oven emits a buzzing or humming noise from the control panel area, even when not heating.
Transformer / Relay Hum
Symptom
Oven enamel or interior coating is cracked, blistered, or flaking.
Cavity Enamel Degradation
Symptom
Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.
Convection (Ring) Heating Element Failure
Symptom
Oven heats but does not reach the set temperature or takes excessively long to preheat.
Reduced Heating Performance / Underheating
Symptom
Oven interior light does not turn on when the door is opened or when the light button is pressed.
Oven Lamp / Door Switch Failure
Symptom
Oven leaks water or condensation from the door or vents, especially on steam or high-moisture cooking modes.
Condensation Management / Door Seal Issue
Symptom
Oven light works but display is blank and controls are unresponsive; oven will not turn on.
Control Power Supply Failure
Symptom
Oven makes loud rattling, scraping, or humming noises when the fan is running.
Convection Fan Mechanical Noise
Symptom
Oven overheats, burning food even at low settings; temperature far exceeds the set value.
Overheating / Temperature Regulation Failure
Symptom
Oven trips the circuit breaker or RCD as soon as it is turned on or when a specific function is selected.
Electrical Short / Earth Leakage
Symptom
Steam-assisted or moisture functions are weak; food dries out instead of being steamed.
Reduced Steam Generation
Symptom
Strong burning smell or smoke from oven during normal cooking (not first use or pyrolytic cleaning).
Contamination / Overheating of Residues
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F1 |
Oven does not heat, display shows F1 shortly after turning on any heating function.
|
Oven Temperature Sensor (NTC) Fault | View Details |
| F10 |
Oven display shows F10 and the touch controls or buttons do not respond correctly.
|
User Interface / Touch Control Fault | View Details |
| F11 |
Oven display shows F11 and the clock/timer functions may be frozen or reset repeatedly.
|
Clock / Timer Circuit Fault | View Details |
| F12 |
Oven display shows F12 and some heating modes (e.g., grill or bottom heat) are unavailable.
|
Heating Element Selection / Relay Fault | View Details |
| F13 |
Oven display shows F13 during pyrolytic self-cleaning; cycle aborts and door may remain locked.
|
Pyrolytic Temperature / Safety Fault | View Details |
| F14 |
Oven display shows F14 and steam-assisted or moisture functions do not work (on steam-enabled Gorenje ovens).
|
Steam Generator / Water System Fault | View Details |
| F15 |
Oven display shows F15 and interior light does not work or stays on permanently.
|
Oven Lamp / Light Circuit Fault | View Details |
| F16 |
Oven display shows F16 and the telescopic or motorized control knobs (on some models) do not extend or retract.
|
Control Knob Motor / Position Sensor Fault | View Details |
| F17 |
Oven display shows F17 and child lock or safety lock cannot be activated or deactivated.
|
Child Lock / Safety Lock Logic Fault | View Details |
| F18 |
Oven display shows F18 and the meat probe or core temperature sensor function does not work (on probe-equipped models).
|
Meat Probe / Core Temperature Sensor Fault | View Details |
| F2 |
Oven overheats, may shut off or lock, display shows F2 during or shortly after a heating cycle.
|
Overtemperature / Sensor Calibration Fault | View Details |
| F3 |
Oven does not heat correctly, display shows F3, sometimes accompanied by erratic temperature swings.
|
Temperature Sensor Circuit Intermittent / Out of Range | View Details |
| F4 |
Oven stops heating mid-cycle, display shows F4, sometimes accompanied by a clicking relay sound.
|
Oven Heating Circuit Fault | View Details |
| F5 |
Oven fan does not run or runs erratically, display shows F5 when a fan-assisted mode is selected.
|
Convection Fan Motor / Feedback Fault | View Details |
| F6 |
Display shows F6 and oven functions are disabled or limited; sometimes appears after a power surge.
|
Electronic Control Board Communication / Internal Error | View Details |
| F7 |
Oven display shows F7 and the door lock may engage or remain locked, especially during or after pyrolytic self-cleaning.
|
Door Lock / Latch System Fault | View Details |
| F8 |
Oven display shows F8 and the cooling fan at the top rear does not run or runs continuously.
|
Cooling Fan Circuit Fault | View Details |
| F9 |
Display shows F9 and oven functions are disabled; may occur after a short circuit or wiring issue.
|
Power Supply / Line Voltage Fault | View Details |
| – |
Grill function does not work; other oven functions heat normally.
|
Grill Heating Circuit Failure | View Details |
| – |
Oven clock and settings reset every time power is turned off or after brief outages.
|
Clock Memory / Backup Failure | View Details |
| – |
Oven cooling fan continues to run for an excessively long time after the oven is turned off.
|
Cooling Fan Control / Thermostat Issue | View Details |
| – |
Oven display and controls work, but the oven cannot be started; pressing Start has no effect.
|
Start Circuit / Safety Interlock Issue | View Details |
| – |
Oven does not heat at all in any mode; fan and light may work but no warmth is produced.
|
Main Heating Circuit Failure | View Details |
| – |
Oven door glass is loose, rattling, or has condensation between inner and outer panes.
|
Door Glass Assembly / Seal Failure | View Details |
| – |
Oven door will not close fully or pops open slightly during operation.
|
Door Hinge / Latch Misalignment | View Details |
| – |
Oven door will not open after cooking (not in pyrolytic mode) and no error code is shown.
|
Mechanical Door Latch Jam | View Details |
| – |
Oven emits a buzzing or humming noise from the control panel area, even when not heating.
|
Transformer / Relay Hum | View Details |
| – |
Oven enamel or interior coating is cracked, blistered, or flaking.
|
Cavity Enamel Degradation | View Details |
| – |
Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.
|
Convection (Ring) Heating Element Failure | View Details |
| – |
Oven heats but does not reach the set temperature or takes excessively long to preheat.
|
Reduced Heating Performance / Underheating | View Details |
| – |
Oven interior light does not turn on when the door is opened or when the light button is pressed.
|
Oven Lamp / Door Switch Failure | View Details |
| – |
Oven leaks water or condensation from the door or vents, especially on steam or high-moisture cooking modes.
|
Condensation Management / Door Seal Issue | View Details |
| – |
Oven light works but display is blank and controls are unresponsive; oven will not turn on.
|
Control Power Supply Failure | View Details |
| – |
Oven makes loud rattling, scraping, or humming noises when the fan is running.
|
Convection Fan Mechanical Noise | View Details |
| – |
Oven overheats, burning food even at low settings; temperature far exceeds the set value.
|
Overheating / Temperature Regulation Failure | View Details |
| – |
Oven trips the circuit breaker or RCD as soon as it is turned on or when a specific function is selected.
|
Electrical Short / Earth Leakage | View Details |
| – |
Steam-assisted or moisture functions are weak; food dries out instead of being steamed.
|
Reduced Steam Generation | View Details |
| – |
Strong burning smell or smoke from oven during normal cooking (not first use or pyrolytic cleaning).
|
Contamination / Overheating of Residues | View Details |
No matching codes found
Advertisements