Danby Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Cooktop or range control displays E0 and may not respond to touch inputs.
Touch Control Communication or Calibration Error
E1
Induction or radiant cooktop zone will not heat, E1 error displayed on the cooktop control.
Cookware Detection or Pan Presence Error (Induction) / Element Overheat Protection
E2
Cooktop shuts down or will not start, E2 error displayed, often after extended high-power use.
Cooktop Over-Temperature or Sensor Error
E3
Induction cooktop zone will not heat and displays E3 shortly after being turned on.
Induction Coil or IGBT Overcurrent/Overheat Fault
E4
Cooktop displays E4 and may shut down one or more zones.
Cooktop Internal Temperature Sensor Fault
E5
Cooktop or range control displays E5 and may be unresponsive or shut down unexpectedly.
Power Supply or Voltage Error
E6
Cooktop displays E6 and may disable all zones.
Internal Communication Error Between User Interface and Power Board
E7
Induction cooktop zone shows E7 and does not heat.
Fan or Cooling System Failure
F1
Electronic control beeps continuously, oven inoperative or behaves erratically, F1 displayed on control panel.
Electronic Oven Control (EOC) Keypad or Control Board Failure
F2
Oven overheats, temperature much higher than set, F2 error displayed and oven shuts off.
Oven Over-Temperature Condition
F3
Oven will not heat properly, F3 error displayed, sometimes appears shortly after starting a bake cycle.
Oven Temperature Sensor Circuit Open
F4
Oven may not heat or may shut down, F4 error displayed intermittently or immediately on power-up.
Oven Temperature Sensor Circuit Shorted
F5
Oven functions may be disabled, F5 error displayed, sometimes accompanied by beeping.
Control Board Relay or Watchdog Failure
F7
Random beeping, keys seem to press themselves, F7 error displayed, oven may not respond to keypad.
Stuck or Shorted Keypad
F8
Oven will not start or stops mid-cycle, F8 error displayed.
Oven Door Lock or Latch Circuit Fault (Self-Clean Models)
F9
Oven door will not unlock after self-clean, F9 error displayed, continuous beeping on some models.
Door Lock Circuit Failure / Door Will Not Unlock
LOC
Control panel displays LOC or a lock icon, buttons do not respond, oven and cooktop may not operate.
Control Panel Child Lock Activated
PF
Display shows PF, clock resets, oven may not start until cleared.
Power Failure or Interruption Detected
Symptom
All gas surface burners fail to ignite; no clicking sound is heard on any burner.
Global Surface Ignition System Failure
Symptom
Control knobs on the range are hard to turn, loose, or do not align with the correct settings.
Worn or Misaligned Control Knobs / Valve Stems
Symptom
Convection feature on a Danby range does not seem to work; fan does not run or food cooks unevenly in convection mode.
Convection Fan or Element Failure
Symptom
Cooktop glass on a Danby range is cracked or shattered.
Damaged Ceramic Glass Cooktop
Symptom
Cooktop surface is extremely hot around the controls or front edge during normal use.
Excessive Cooktop Heat Transfer
Symptom
Electric cooktop element on a Danby range does not heat, while others work normally.
Single Radiant or Coil Element Failure
Symptom
Gas oven on a Danby range will not ignite; you hear clicking but no flame, or no clicking at all.
No Heat – Gas Oven Ignition Failure
Symptom
One surface burner on a gas Danby range will not light, but others work normally.
Single Gas Surface Burner Ignition Failure
Symptom
Oven door glass is fogged, streaked, or has condensation between the inner and outer panes.
Moisture Between Oven Door Glass Panes
Symptom
Oven door on a Danby range will not close fully or appears crooked.
Oven Door Misalignment or Hinge Failure
Symptom
Oven fan (convection or cooling) runs continuously even when the oven is off and cool.
Stuck Fan Relay or Faulty Temperature Sensor
Symptom
Oven heats but does not reach or maintain the set temperature; food undercooked or overcooked.
Inaccurate Oven Temperature
Symptom
Oven light does not turn on when the door is opened or when the light button is pressed.
Oven Light Circuit Failure
Symptom
Oven or cooktop produces a burning smell or smoke during normal cooking (not initial burn-in).
Overheating or Contaminant Burning
Symptom
Oven will not heat at all on a Danby electric range; display and lights work but no heat in bake or broil.
No Heat – Electric Oven
Symptom
Range clock and display are blank; oven and cooktop do not work on an electric Danby range.
No Power to Control or Entire Range
Symptom
Range emits a strong gas smell when burners or oven are used.
Gas Leak or Incomplete Combustion
Symptom
Range or cooktop trips the circuit breaker when an element or oven is turned on.
Electrical Short or Overcurrent
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Cooktop or range control displays E0 and may not respond to touch inputs.
|
Touch Control Communication or Calibration Error | View Details |
| E1 |
Induction or radiant cooktop zone will not heat, E1 error displayed on the cooktop control.
|
Cookware Detection or Pan Presence Error (Induction) / Element Overheat Protection | View Details |
| E2 |
Cooktop shuts down or will not start, E2 error displayed, often after extended high-power use.
|
Cooktop Over-Temperature or Sensor Error | View Details |
| E3 |
Induction cooktop zone will not heat and displays E3 shortly after being turned on.
|
Induction Coil or IGBT Overcurrent/Overheat Fault | View Details |
| E4 |
Cooktop displays E4 and may shut down one or more zones.
|
Cooktop Internal Temperature Sensor Fault | View Details |
| E5 |
Cooktop or range control displays E5 and may be unresponsive or shut down unexpectedly.
|
Power Supply or Voltage Error | View Details |
| E6 |
Cooktop displays E6 and may disable all zones.
|
Internal Communication Error Between User Interface and Power Board | View Details |
| E7 |
Induction cooktop zone shows E7 and does not heat.
|
Fan or Cooling System Failure | View Details |
| F1 |
Electronic control beeps continuously, oven inoperative or behaves erratically, F1 displayed on control panel.
|
Electronic Oven Control (EOC) Keypad or Control Board Failure | View Details |
| F2 |
Oven overheats, temperature much higher than set, F2 error displayed and oven shuts off.
|
Oven Over-Temperature Condition | View Details |
| F3 |
Oven will not heat properly, F3 error displayed, sometimes appears shortly after starting a bake cycle.
|
Oven Temperature Sensor Circuit Open | View Details |
| F4 |
Oven may not heat or may shut down, F4 error displayed intermittently or immediately on power-up.
|
Oven Temperature Sensor Circuit Shorted | View Details |
| F5 |
Oven functions may be disabled, F5 error displayed, sometimes accompanied by beeping.
|
Control Board Relay or Watchdog Failure | View Details |
| F7 |
Random beeping, keys seem to press themselves, F7 error displayed, oven may not respond to keypad.
|
Stuck or Shorted Keypad | View Details |
| F8 |
Oven will not start or stops mid-cycle, F8 error displayed.
|
Oven Door Lock or Latch Circuit Fault (Self-Clean Models) | View Details |
| F9 |
Oven door will not unlock after self-clean, F9 error displayed, continuous beeping on some models.
|
Door Lock Circuit Failure / Door Will Not Unlock | View Details |
| LOC |
Control panel displays LOC or a lock icon, buttons do not respond, oven and cooktop may not operate.
|
Control Panel Child Lock Activated | View Details |
| PF |
Display shows PF, clock resets, oven may not start until cleared.
|
Power Failure or Interruption Detected | View Details |
| – |
All gas surface burners fail to ignite; no clicking sound is heard on any burner.
|
Global Surface Ignition System Failure | View Details |
| – |
Control knobs on the range are hard to turn, loose, or do not align with the correct settings.
|
Worn or Misaligned Control Knobs / Valve Stems | View Details |
| – |
Convection feature on a Danby range does not seem to work; fan does not run or food cooks unevenly in convection mode.
|
Convection Fan or Element Failure | View Details |
| – |
Cooktop glass on a Danby range is cracked or shattered.
|
Damaged Ceramic Glass Cooktop | View Details |
| – |
Cooktop surface is extremely hot around the controls or front edge during normal use.
|
Excessive Cooktop Heat Transfer | View Details |
| – |
Electric cooktop element on a Danby range does not heat, while others work normally.
|
Single Radiant or Coil Element Failure | View Details |
| – |
Gas oven on a Danby range will not ignite; you hear clicking but no flame, or no clicking at all.
|
No Heat – Gas Oven Ignition Failure | View Details |
| – |
One surface burner on a gas Danby range will not light, but others work normally.
|
Single Gas Surface Burner Ignition Failure | View Details |
| – |
Oven door glass is fogged, streaked, or has condensation between the inner and outer panes.
|
Moisture Between Oven Door Glass Panes | View Details |
| – |
Oven door on a Danby range will not close fully or appears crooked.
|
Oven Door Misalignment or Hinge Failure | View Details |
| – |
Oven fan (convection or cooling) runs continuously even when the oven is off and cool.
|
Stuck Fan Relay or Faulty Temperature Sensor | View Details |
| – |
Oven heats but does not reach or maintain the set temperature; food undercooked or overcooked.
|
Inaccurate Oven Temperature | View Details |
| – |
Oven light does not turn on when the door is opened or when the light button is pressed.
|
Oven Light Circuit Failure | View Details |
| – |
Oven or cooktop produces a burning smell or smoke during normal cooking (not initial burn-in).
|
Overheating or Contaminant Burning | View Details |
| – |
Oven will not heat at all on a Danby electric range; display and lights work but no heat in bake or broil.
|
No Heat – Electric Oven | View Details |
| – |
Range clock and display are blank; oven and cooktop do not work on an electric Danby range.
|
No Power to Control or Entire Range | View Details |
| – |
Range emits a strong gas smell when burners or oven are used.
|
Gas Leak or Incomplete Combustion | View Details |
| – |
Range or cooktop trips the circuit breaker when an element or oven is turned on.
|
Electrical Short or Overcurrent | View Details |
No matching codes found
Advertisements