Summit Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Cooktop or range control displays E0 and surface elements may not respond.
Control Board Communication or Configuration Error
E1
Induction or radiant cooktop zone displays E1 and will not heat.
Cooktop Overheat or Pan Detection Error
E2
Induction or glass cooktop zone displays E2 and shuts off.
Cooktop Surface Temperature Sensor Error
E3
Induction cooktop displays E3 and all zones may shut down.
Cooktop Over-Temperature Protection Activated
E4
Induction cooktop zone displays E4 and will not heat.
Induction Coil or Power Module Fault
E5
Induction cooktop displays E5 and may shut down multiple zones.
Supply Voltage Out of Range
E6
Induction cooktop displays E6 and zones are disabled.
Internal Communication Error Between User Interface and Power Board
ERR
Display shows ERR when attempting to set temperature or timer, oven will not start.
Invalid Keypad Entry or Control Logic Error
F1
Electronic control beeps continuously and displays F1, oven functions disabled or erratic.
Electronic Oven Control (EOC) Keypad or Control Board Failure
F2
Oven shuts off and displays F2 during or shortly after a bake or broil cycle, often accompanied by very high heat.
Oven Over-Temperature Condition
F3
F3 displayed and oven will not heat or shuts down shortly after starting a cycle.
Oven Temperature Sensor Circuit Open
F4
F4 displayed intermittently, oven temperature swings wildly or shuts off unexpectedly.
Oven Temperature Sensor Circuit Shorted
F5
F5 displayed, oven will not start or cancels cycles immediately.
Oven Door Lock or Latch Switch Failure (Self-Clean Models)
F7
F7 displayed, random beeping, keys respond erratically or not at all.
Stuck or Shorted Keypad
F8
F8 displayed, oven may not heat or may shut off unexpectedly.
Relay or Power Board Failure
F9
F9 displayed, oven door may be locked or will not lock/unlock after self-clean.
Door Lock Circuit Failure
LOC
Control panel displays LOC or a lock icon and will not accept temperature or mode changes.
Control Panel Child Lock Activated
LOCK
Display shows LOCK and oven door will not open after self-clean cycle.
Door Still in High-Temperature Lock Mode
PF
Display shows PF and oven or clock resets after a power interruption.
Power Failure Detected
SAb
Display shows SAb and oven will not heat, but clock and some keys work.
Sabbath Mode Activated
Symptom
Clock and display are blank; range appears completely dead.
No Power to Range
Symptom
Control panel buttons or knobs do not respond or respond intermittently.
User Interface or Control Failure
Symptom
Cooling fan behind the control panel runs continuously, even when the oven is off and cool.
Stuck Cooling Fan Relay or Faulty Temperature Sensor
Symptom
Electric surface element heats only on high and cannot be controlled at lower settings.
Failed Infinite Heat Control Switch
Symptom
Electric surface element on a Summit electric range does not heat at all.
Open Surface Element or Infinite Switch Failure
Symptom
Excessive heat felt on control panel or adjacent cabinets during oven use.
Improper Venting or Cooling Fan Failure
Symptom
Gas burner flame is yellow, lifting, or noisy (roaring sound).
Improper Air-to-Gas Mixture
Symptom
Gas burner ignites but flame is very weak or uneven, especially on low settings.
Improper Gas Flow or Burner Contamination
Symptom
Gas burners will not ignite; clicking sound may be present but no flame appears on any burner.
No Gas Supply or Ignition Failure
Symptom
One gas burner will not ignite but others work normally; you may hear clicking at that burner.
Individual Burner Ignition Failure
Symptom
Oven door will not close fully or appears misaligned.
Door Hinge or Hinge Receptacle Failure
Symptom
Oven door will not open after a self-clean cycle, even when cool.
Stuck Self-Clean Door Lock
Symptom
Oven interior light does not turn on when door is opened or when light button is pressed.
Oven Light Circuit Failure
Symptom
Oven light and display work, but oven will not start any cooking cycle.
No Heat Due to Safety Interlock or Control Failure
Symptom
Oven or cooktop produces excessive smoke or burning smell during normal cooking.
Contamination on Heating Surfaces
Symptom
Oven temperature is consistently too hot or too cold compared to the set temperature.
Oven Temperature Calibration or Sensor Drift
Symptom
Oven will not heat in bake mode, but broil may still work (gas or electric).
Bake Circuit Failure
Symptom
Oven will not heat in broil mode, but bake works.
Broil Circuit Failure
Symptom
Range or cooktop glass top is cracked or shattered.
Damaged Ceramic Glass Cooktop
Symptom
Range trips the circuit breaker when an oven or surface element is turned on.
Electrical Short to Ground
Symptom
Strong gas smell around the range when burners or oven are off.
Gas Leak in Supply or Manifold
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Cooktop or range control displays E0 and surface elements may not respond.
|
Control Board Communication or Configuration Error | View Details |
| E1 |
Induction or radiant cooktop zone displays E1 and will not heat.
|
Cooktop Overheat or Pan Detection Error | View Details |
| E2 |
Induction or glass cooktop zone displays E2 and shuts off.
|
Cooktop Surface Temperature Sensor Error | View Details |
| E3 |
Induction cooktop displays E3 and all zones may shut down.
|
Cooktop Over-Temperature Protection Activated | View Details |
| E4 |
Induction cooktop zone displays E4 and will not heat.
|
Induction Coil or Power Module Fault | View Details |
| E5 |
Induction cooktop displays E5 and may shut down multiple zones.
|
Supply Voltage Out of Range | View Details |
| E6 |
Induction cooktop displays E6 and zones are disabled.
|
Internal Communication Error Between User Interface and Power Board | View Details |
| ERR |
Display shows ERR when attempting to set temperature or timer, oven will not start.
|
Invalid Keypad Entry or Control Logic Error | View Details |
| F1 |
Electronic control beeps continuously and displays F1, oven functions disabled or erratic.
|
Electronic Oven Control (EOC) Keypad or Control Board Failure | View Details |
| F2 |
Oven shuts off and displays F2 during or shortly after a bake or broil cycle, often accompanied by very high heat.
|
Oven Over-Temperature Condition | View Details |
| F3 |
F3 displayed and oven will not heat or shuts down shortly after starting a cycle.
|
Oven Temperature Sensor Circuit Open | View Details |
| F4 |
F4 displayed intermittently, oven temperature swings wildly or shuts off unexpectedly.
|
Oven Temperature Sensor Circuit Shorted | View Details |
| F5 |
F5 displayed, oven will not start or cancels cycles immediately.
|
Oven Door Lock or Latch Switch Failure (Self-Clean Models) | View Details |
| F7 |
F7 displayed, random beeping, keys respond erratically or not at all.
|
Stuck or Shorted Keypad | View Details |
| F8 |
F8 displayed, oven may not heat or may shut off unexpectedly.
|
Relay or Power Board Failure | View Details |
| F9 |
F9 displayed, oven door may be locked or will not lock/unlock after self-clean.
|
Door Lock Circuit Failure | View Details |
| LOC |
Control panel displays LOC or a lock icon and will not accept temperature or mode changes.
|
Control Panel Child Lock Activated | View Details |
| LOCK |
Display shows LOCK and oven door will not open after self-clean cycle.
|
Door Still in High-Temperature Lock Mode | View Details |
| PF |
Display shows PF and oven or clock resets after a power interruption.
|
Power Failure Detected | View Details |
| SAb |
Display shows SAb and oven will not heat, but clock and some keys work.
|
Sabbath Mode Activated | View Details |
| – |
Clock and display are blank; range appears completely dead.
|
No Power to Range | View Details |
| – |
Control panel buttons or knobs do not respond or respond intermittently.
|
User Interface or Control Failure | View Details |
| – |
Cooling fan behind the control panel runs continuously, even when the oven is off and cool.
|
Stuck Cooling Fan Relay or Faulty Temperature Sensor | View Details |
| – |
Electric surface element heats only on high and cannot be controlled at lower settings.
|
Failed Infinite Heat Control Switch | View Details |
| – |
Electric surface element on a Summit electric range does not heat at all.
|
Open Surface Element or Infinite Switch Failure | View Details |
| – |
Excessive heat felt on control panel or adjacent cabinets during oven use.
|
Improper Venting or Cooling Fan Failure | View Details |
| – |
Gas burner flame is yellow, lifting, or noisy (roaring sound).
|
Improper Air-to-Gas Mixture | View Details |
| – |
Gas burner ignites but flame is very weak or uneven, especially on low settings.
|
Improper Gas Flow or Burner Contamination | View Details |
| – |
Gas burners will not ignite; clicking sound may be present but no flame appears on any burner.
|
No Gas Supply or Ignition Failure | View Details |
| – |
One gas burner will not ignite but others work normally; you may hear clicking at that burner.
|
Individual Burner Ignition Failure | View Details |
| – |
Oven door will not close fully or appears misaligned.
|
Door Hinge or Hinge Receptacle Failure | View Details |
| – |
Oven door will not open after a self-clean cycle, even when cool.
|
Stuck Self-Clean Door Lock | View Details |
| – |
Oven interior light does not turn on when door is opened or when light button is pressed.
|
Oven Light Circuit Failure | View Details |
| – |
Oven light and display work, but oven will not start any cooking cycle.
|
No Heat Due to Safety Interlock or Control Failure | View Details |
| – |
Oven or cooktop produces excessive smoke or burning smell during normal cooking.
|
Contamination on Heating Surfaces | View Details |
| – |
Oven temperature is consistently too hot or too cold compared to the set temperature.
|
Oven Temperature Calibration or Sensor Drift | View Details |
| – |
Oven will not heat in bake mode, but broil may still work (gas or electric).
|
Bake Circuit Failure | View Details |
| – |
Oven will not heat in broil mode, but bake works.
|
Broil Circuit Failure | View Details |
| – |
Range or cooktop glass top is cracked or shattered.
|
Damaged Ceramic Glass Cooktop | View Details |
| – |
Range trips the circuit breaker when an oven or surface element is turned on.
|
Electrical Short to Ground | View Details |
| – |
Strong gas smell around the range when burners or oven are off.
|
Gas Leak in Supply or Manifold | View Details |
No matching codes found
Advertisements