Vedette
Vedette Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Washer-dryer combo will not start; display shows E01 and door symbol flashes.
Door Lock Failure
E02
Washer-dryer does not fill with water or fills very slowly; E02 appears on the display.
Water Inlet Timeout / Fill Error
E03
Washer-dryer does not drain; water remains in drum and E03 is displayed.
Drain Pump Failure / Drain Timeout
E04
Washer-dryer overfills or shows E04 shortly after starting the wash cycle; sometimes water is seen in the door glass when idle.
Water Level Sensor / Pressure Switch Error (Overfill)
E05
Washer-dryer stops heating during wash; clothes come out cold and E05 is displayed.
Wash Heating Circuit Fault
E06
Drying function does not heat; laundry remains wet after drying cycle and E06 appears.
Dryer Heating Circuit Fault
E07
Washer-dryer drum does not rotate during wash or spin; E07 is displayed.
Motor Drive Fault
E08
Washer-dryer fails to reach full spin speed; E08 appears and laundry is very wet at end of cycle.
Tachometer / Motor Speed Feedback Error
E09
Washer-dryer stops mid-cycle and displays E09; sometimes accompanied by tripped household breaker.
Triac / Motor Power Short Circuit
E10
Washer-dryer stops and displays E10; water level in drum seems incorrect (too low or too high).
General Water Level / Pressure Sensor Fault
E11
Washer-dryer displays E11 and does not start drying; fan noise may be absent.
Dryer Fan / Blower Fault
E12
Washer-dryer shows E12 and drying performance is poor; condenser may be blocked.
Condenser / Heat Exchanger Blockage
E13
Washer-dryer displays E13 and stops; water is found in the base of the machine or under the unit.
Leak Detected / Anti-Flood System Activated
E14
Washer-dryer shows E14 and does not start; control panel may be unresponsive or erratic.
User Interface / Control Panel Communication Error
E15
Washer-dryer displays E15; program stops unexpectedly and cannot be resumed.
Program Memory / Main Control Board Fault
E16
Washer-dryer shows E16; door remains locked at end of cycle or will not lock at start.
Door Lock Circuit Error
E17
Washer-dryer displays E17; water does not enter or stops suddenly during fill.
Water Inlet Valve Electrical Fault
E18
Washer-dryer shows E18; drum does not spin during drying, though heating may be present.
Drying Drum Rotation Fault
E19
Washer-dryer displays E19; drying cycle ends quickly with laundry still wet.
Dryer Moisture / Temperature Sensor Fault
E20
Washer-dryer shows E20; machine stops with water in drum or during spin.
General Drain / Pump System Error
E21
Washer-dryer displays E21; drum makes grinding noise and may not turn.
Drum Bearing / Drum Support Fault
E22
Washer-dryer shows E22; overheating detected during drying cycle, machine stops.
Dryer Overheat Protection Activated
E23
Washer-dryer displays E23; drain pump runs continuously even when there is no water in the drum.
Anti-Flood / Pump Relay Stuck
E24
Washer-dryer shows E24; communication error between main control and motor or dryer module.
Internal Communication / Bus Error
Symptom
Washer-dryer causes lights to flicker or trips the circuit breaker when starting.
Electrical Overload or Short
Symptom
Washer-dryer combo will not power on at all; no lights or display, but outlet has power.
Main Power Supply / Noise Filter Failure
Symptom
Washer-dryer detergent drawer overflows with water or detergent during fill.
Dispenser Drawer Overflow
Symptom
Washer-dryer does not dry clothes properly; laundry is warm but still damp at the end of the drying cycle.
Reduced Drying Efficiency
Symptom
Washer-dryer door will not open at the end of the cycle, but there is no error code.
Door Interlock Stuck Closed
Symptom
Washer-dryer emits a burning smell during operation, especially in spin or drying.
Overheating Electrical or Mechanical Component
Symptom
Washer-dryer emits a strong musty or moldy odor from the drum, especially at the start of a cycle.
Biofilm and Mold Build-Up in Drum and Hoses
Symptom
Washer-dryer fills and drains but drum does not turn during wash or spin; no error code displayed.
Mechanical Drive Failure Without Detection
Symptom
Washer-dryer is extremely noisy during spin; banging or knocking sounds from drum.
Excessive Vibration / Suspension System Failure
Symptom
Washer-dryer leaks water from the front door area during wash.
Door Seal (Gasket) Leakage
Symptom
Washer-dryer leaks water from the rear or bottom during wash or drain.
Internal Hose or Pump Leakage
Symptom
Washer-dryer leaves clothes very wet at the end of the cycle, but no error code is shown.
Spin Inefficiency / Residual Water
Symptom
Washer-dryer leaves white or grey residue on dark clothes after washing.
Detergent / Limescale Residue Deposition
Symptom
Washer-dryer powers on but will not start any program; Start button beeps and nothing happens.
Start Inhibit / Door or Program Logic Fault
Symptom
Washer-dryer produces a loud scraping or metallic noise when the drum turns.
Foreign Object Between Drum and Tub
Symptom
Washer-dryer takes much longer than the displayed time to complete cycles.
Cycle Time Extension Due to Sensing
Symptom
Washer-dryer vibrates excessively and "walks" across the floor during spin, even when level.
Insufficient Damping / Installation Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Washer-dryer combo will not start; display shows E01 and door symbol flashes.
|
Door Lock Failure | View Details |
| E02 |
Washer-dryer does not fill with water or fills very slowly; E02 appears on the display.
|
Water Inlet Timeout / Fill Error | View Details |
| E03 |
Washer-dryer does not drain; water remains in drum and E03 is displayed.
|
Drain Pump Failure / Drain Timeout | View Details |
| E04 |
Washer-dryer overfills or shows E04 shortly after starting the wash cycle; sometimes water is seen in the door glass when idle.
|
Water Level Sensor / Pressure Switch Error (Overfill) | View Details |
| E05 |
Washer-dryer stops heating during wash; clothes come out cold and E05 is displayed.
|
Wash Heating Circuit Fault | View Details |
| E06 |
Drying function does not heat; laundry remains wet after drying cycle and E06 appears.
|
Dryer Heating Circuit Fault | View Details |
| E07 |
Washer-dryer drum does not rotate during wash or spin; E07 is displayed.
|
Motor Drive Fault | View Details |
| E08 |
Washer-dryer fails to reach full spin speed; E08 appears and laundry is very wet at end of cycle.
|
Tachometer / Motor Speed Feedback Error | View Details |
| E09 |
Washer-dryer stops mid-cycle and displays E09; sometimes accompanied by tripped household breaker.
|
Triac / Motor Power Short Circuit | View Details |
| E10 |
Washer-dryer stops and displays E10; water level in drum seems incorrect (too low or too high).
|
General Water Level / Pressure Sensor Fault | View Details |
| E11 |
Washer-dryer displays E11 and does not start drying; fan noise may be absent.
|
Dryer Fan / Blower Fault | View Details |
| E12 |
Washer-dryer shows E12 and drying performance is poor; condenser may be blocked.
|
Condenser / Heat Exchanger Blockage | View Details |
| E13 |
Washer-dryer displays E13 and stops; water is found in the base of the machine or under the unit.
|
Leak Detected / Anti-Flood System Activated | View Details |
| E14 |
Washer-dryer shows E14 and does not start; control panel may be unresponsive or erratic.
|
User Interface / Control Panel Communication Error | View Details |
| E15 |
Washer-dryer displays E15; program stops unexpectedly and cannot be resumed.
|
Program Memory / Main Control Board Fault | View Details |
| E16 |
Washer-dryer shows E16; door remains locked at end of cycle or will not lock at start.
|
Door Lock Circuit Error | View Details |
| E17 |
Washer-dryer displays E17; water does not enter or stops suddenly during fill.
|
Water Inlet Valve Electrical Fault | View Details |
| E18 |
Washer-dryer shows E18; drum does not spin during drying, though heating may be present.
|
Drying Drum Rotation Fault | View Details |
| E19 |
Washer-dryer displays E19; drying cycle ends quickly with laundry still wet.
|
Dryer Moisture / Temperature Sensor Fault | View Details |
| E20 |
Washer-dryer shows E20; machine stops with water in drum or during spin.
|
General Drain / Pump System Error | View Details |
| E21 |
Washer-dryer displays E21; drum makes grinding noise and may not turn.
|
Drum Bearing / Drum Support Fault | View Details |
| E22 |
Washer-dryer shows E22; overheating detected during drying cycle, machine stops.
|
Dryer Overheat Protection Activated | View Details |
| E23 |
Washer-dryer displays E23; drain pump runs continuously even when there is no water in the drum.
|
Anti-Flood / Pump Relay Stuck | View Details |
| E24 |
Washer-dryer shows E24; communication error between main control and motor or dryer module.
|
Internal Communication / Bus Error | View Details |
| – |
Washer-dryer causes lights to flicker or trips the circuit breaker when starting.
|
Electrical Overload or Short | View Details |
| – |
Washer-dryer combo will not power on at all; no lights or display, but outlet has power.
|
Main Power Supply / Noise Filter Failure | View Details |
| – |
Washer-dryer detergent drawer overflows with water or detergent during fill.
|
Dispenser Drawer Overflow | View Details |
| – |
Washer-dryer does not dry clothes properly; laundry is warm but still damp at the end of the drying cycle.
|
Reduced Drying Efficiency | View Details |
| – |
Washer-dryer door will not open at the end of the cycle, but there is no error code.
|
Door Interlock Stuck Closed | View Details |
| – |
Washer-dryer emits a burning smell during operation, especially in spin or drying.
|
Overheating Electrical or Mechanical Component | View Details |
| – |
Washer-dryer emits a strong musty or moldy odor from the drum, especially at the start of a cycle.
|
Biofilm and Mold Build-Up in Drum and Hoses | View Details |
| – |
Washer-dryer fills and drains but drum does not turn during wash or spin; no error code displayed.
|
Mechanical Drive Failure Without Detection | View Details |
| – |
Washer-dryer is extremely noisy during spin; banging or knocking sounds from drum.
|
Excessive Vibration / Suspension System Failure | View Details |
| – |
Washer-dryer leaks water from the front door area during wash.
|
Door Seal (Gasket) Leakage | View Details |
| – |
Washer-dryer leaks water from the rear or bottom during wash or drain.
|
Internal Hose or Pump Leakage | View Details |
| – |
Washer-dryer leaves clothes very wet at the end of the cycle, but no error code is shown.
|
Spin Inefficiency / Residual Water | View Details |
| – |
Washer-dryer leaves white or grey residue on dark clothes after washing.
|
Detergent / Limescale Residue Deposition | View Details |
| – |
Washer-dryer powers on but will not start any program; Start button beeps and nothing happens.
|
Start Inhibit / Door or Program Logic Fault | View Details |
| – |
Washer-dryer produces a loud scraping or metallic noise when the drum turns.
|
Foreign Object Between Drum and Tub | View Details |
| – |
Washer-dryer takes much longer than the displayed time to complete cycles.
|
Cycle Time Extension Due to Sensing | View Details |
| – |
Washer-dryer vibrates excessively and "walks" across the floor during spin, even when level.
|
Insufficient Damping / Installation Issue | View Details |
No matching codes found
Advertisements