Teka Dryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dryer will not start; display shows E01 and cycle cannot be selected or started
Door Lock / Door Switch Fault
E02
Dryer stops shortly after starting; display shows E02 and drum does not rotate
Motor Start / Motor Circuit Fault
E03
Dryer stops mid-cycle with E03; clothes remain wet and there is no heat
Heating Circuit Failure
E04
Dryer displays E04 and stops; water tank symbol may be lit on condenser models
Condensate Pump / Water Level Fault
E05
Dryer shows E05 and does not heat properly; cycle may end quickly with damp clothes
NTC Temperature Sensor Fault (Drum / Exhaust)
E06
Dryer displays E06 and will not start or stops shortly after starting; sometimes accompanied by unusual noises from the drum area
Drum Rotation / Tacho Feedback Fault
E07
Dryer shows E07 and stops; often associated with overheating or very hot cabinet surfaces
Overheating / Safety Thermostat Trip
E08
Heat pump Teka dryer shows E08; dryer runs but does not heat effectively and cycle times are very long
Heat Pump System Fault (Compressor / Refrigerant Circuit)
E09
Dryer displays E09 and will not start; sometimes accompanied by no response from buttons or erratic display behavior
Main Control Board / Power Supply Fault
E10
Dryer shows E10 and stops; on condenser models, there may be water in the base tray and an alarm sound
Leakage / Base Tray Flood Protection
E11
Dryer displays E11; drum may rotate but there is no or very low heat
Exhaust / Airflow Sensor Fault
E12
Dryer shows E12; cycle may not start or may stop unexpectedly, often on sensor-dry programs
Moisture Sensor / Conductivity Fault
E13
Dryer displays E13 and may stop shortly after starting; sometimes accompanied by unusual fan noise
Blower Fan / Air Circulation Fault
E14
Dryer shows E14; display or control panel may be unresponsive or partially lit
User Interface / Display Board Communication Fault
E15
Dryer displays E15 and will not start; sometimes occurs after a power outage or surge
Configuration / EEPROM Error
Symptom
Dryer cabinet becomes excessively hot to the touch during operation
Cabinet Overheating
Symptom
Dryer display and buttons work, but the drum does not rotate and there is no motor sound
Motor Not Running
Symptom
Dryer display shows unusually short or long remaining times that do not match actual drying progress
Sensor Drying Algorithm / Moisture Sensing Issue
Symptom
Dryer door will not open at the end of the cycle; door appears stuck closed
Door Lock Mechanism Jammed
Symptom
Dryer door will not stay closed; it pops open during operation
Door Latch / Catch Failure
Symptom
Dryer drum does not turn, but you can hear the motor humming when a cycle is started
Drive Belt Slipped or Broken
Symptom
Dryer emits a burning smell during operation
Overheating or Foreign Object Contact
Symptom
Dryer emits an unusual chemical or plastic smell when new or after long storage
Initial Burn-In / Residual Manufacturing Odors
Symptom
Dryer interior light does not turn on when the door is opened
Drum Light Circuit Fault
Symptom
Dryer leaks water onto the floor during or after a cycle (condenser/heat pump models)
Condensate Leak
Symptom
Dryer makes a rattling or clinking noise, especially at low speeds
Foreign Objects in Drum or Fan
Symptom
Dryer makes loud banging or thumping noises during operation
Drum Support / Suspension Fault
Symptom
Dryer occasionally trips the household circuit breaker or RCD during operation
Electrical Leakage or Overcurrent
Symptom
Dryer powers on but will not start the cycle when Start/Pause is pressed; a beep may sound but nothing happens
Start Inhibit / Door or Control Logic Issue
Symptom
Dryer produces a high-pitched squealing or squeaking noise while running
Friction in Drum Support or Idler Pulley
Symptom
Dryer runs but clothes come out very wrinkled and creased
Excessive Creasing / Drum Reversal or Cool-Down Issue
Symptom
Dryer runs but does not heat; clothes remain cold and wet at the end of the cycle (no error code shown)
Heating System Failure Without Code
Symptom
Dryer stops after a few minutes and clothes are still very wet; can be restarted but stops again quickly
Overheating and Thermal Cut-Out Cycling
Symptom
Dryer stops with water collecting in the base and may trigger a safety float (no code on basic models)
Base Tray Flood Without Display Code
Symptom
Dryer takes too long to dry clothes; loads are still damp at the end of the program
Poor Drying Performance / Restricted Airflow
Symptom
Dryer vibrates excessively or moves across the floor during operation
Excessive Vibration / Installation Issue
Symptom
Dryer will not start at all; no lights on the display and no response to buttons
No Power / Dead Appliance
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dryer will not start; display shows E01 and cycle cannot be selected or started
|
Door Lock / Door Switch Fault | View Details |
| E02 |
Dryer stops shortly after starting; display shows E02 and drum does not rotate
|
Motor Start / Motor Circuit Fault | View Details |
| E03 |
Dryer stops mid-cycle with E03; clothes remain wet and there is no heat
|
Heating Circuit Failure | View Details |
| E04 |
Dryer displays E04 and stops; water tank symbol may be lit on condenser models
|
Condensate Pump / Water Level Fault | View Details |
| E05 |
Dryer shows E05 and does not heat properly; cycle may end quickly with damp clothes
|
NTC Temperature Sensor Fault (Drum / Exhaust) | View Details |
| E06 |
Dryer displays E06 and will not start or stops shortly after starting; sometimes accompanied by unusual noises from the drum area
|
Drum Rotation / Tacho Feedback Fault | View Details |
| E07 |
Dryer shows E07 and stops; often associated with overheating or very hot cabinet surfaces
|
Overheating / Safety Thermostat Trip | View Details |
| E08 |
Heat pump Teka dryer shows E08; dryer runs but does not heat effectively and cycle times are very long
|
Heat Pump System Fault (Compressor / Refrigerant Circuit) | View Details |
| E09 |
Dryer displays E09 and will not start; sometimes accompanied by no response from buttons or erratic display behavior
|
Main Control Board / Power Supply Fault | View Details |
| E10 |
Dryer shows E10 and stops; on condenser models, there may be water in the base tray and an alarm sound
|
Leakage / Base Tray Flood Protection | View Details |
| E11 |
Dryer displays E11; drum may rotate but there is no or very low heat
|
Exhaust / Airflow Sensor Fault | View Details |
| E12 |
Dryer shows E12; cycle may not start or may stop unexpectedly, often on sensor-dry programs
|
Moisture Sensor / Conductivity Fault | View Details |
| E13 |
Dryer displays E13 and may stop shortly after starting; sometimes accompanied by unusual fan noise
|
Blower Fan / Air Circulation Fault | View Details |
| E14 |
Dryer shows E14; display or control panel may be unresponsive or partially lit
|
User Interface / Display Board Communication Fault | View Details |
| E15 |
Dryer displays E15 and will not start; sometimes occurs after a power outage or surge
|
Configuration / EEPROM Error | View Details |
| – |
Dryer cabinet becomes excessively hot to the touch during operation
|
Cabinet Overheating | View Details |
| – |
Dryer display and buttons work, but the drum does not rotate and there is no motor sound
|
Motor Not Running | View Details |
| – |
Dryer display shows unusually short or long remaining times that do not match actual drying progress
|
Sensor Drying Algorithm / Moisture Sensing Issue | View Details |
| – |
Dryer door will not open at the end of the cycle; door appears stuck closed
|
Door Lock Mechanism Jammed | View Details |
| – |
Dryer door will not stay closed; it pops open during operation
|
Door Latch / Catch Failure | View Details |
| – |
Dryer drum does not turn, but you can hear the motor humming when a cycle is started
|
Drive Belt Slipped or Broken | View Details |
| – |
Dryer emits a burning smell during operation
|
Overheating or Foreign Object Contact | View Details |
| – |
Dryer emits an unusual chemical or plastic smell when new or after long storage
|
Initial Burn-In / Residual Manufacturing Odors | View Details |
| – |
Dryer interior light does not turn on when the door is opened
|
Drum Light Circuit Fault | View Details |
| – |
Dryer leaks water onto the floor during or after a cycle (condenser/heat pump models)
|
Condensate Leak | View Details |
| – |
Dryer makes a rattling or clinking noise, especially at low speeds
|
Foreign Objects in Drum or Fan | View Details |
| – |
Dryer makes loud banging or thumping noises during operation
|
Drum Support / Suspension Fault | View Details |
| – |
Dryer occasionally trips the household circuit breaker or RCD during operation
|
Electrical Leakage or Overcurrent | View Details |
| – |
Dryer powers on but will not start the cycle when Start/Pause is pressed; a beep may sound but nothing happens
|
Start Inhibit / Door or Control Logic Issue | View Details |
| – |
Dryer produces a high-pitched squealing or squeaking noise while running
|
Friction in Drum Support or Idler Pulley | View Details |
| – |
Dryer runs but clothes come out very wrinkled and creased
|
Excessive Creasing / Drum Reversal or Cool-Down Issue | View Details |
| – |
Dryer runs but does not heat; clothes remain cold and wet at the end of the cycle (no error code shown)
|
Heating System Failure Without Code | View Details |
| – |
Dryer stops after a few minutes and clothes are still very wet; can be restarted but stops again quickly
|
Overheating and Thermal Cut-Out Cycling | View Details |
| – |
Dryer stops with water collecting in the base and may trigger a safety float (no code on basic models)
|
Base Tray Flood Without Display Code | View Details |
| – |
Dryer takes too long to dry clothes; loads are still damp at the end of the program
|
Poor Drying Performance / Restricted Airflow | View Details |
| – |
Dryer vibrates excessively or moves across the floor during operation
|
Excessive Vibration / Installation Issue | View Details |
| – |
Dryer will not start at all; no lights on the display and no response to buttons
|
No Power / Dead Appliance | View Details |
No matching codes found
Advertisements