New World
New World Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
Oven will not heat, display shows F01 shortly after a cooking program is selected.
Main Oven Temperature Sensor Circuit Fault
F02
Oven overheats, may burn food quickly, and displays F02 or shuts down mid-cycle.
Oven Overtemperature / Sensor Range Error
F03
Fan oven not heating, fan runs but no heat, F03 displayed.
Fan Oven Heating Element Circuit Fault
F04
Grill does not heat or cuts out, F04 shown on display when grill is selected.
Grill Element / Grill Circuit Fault
F05
Main oven not heating on conventional (top/bottom) mode, but fan mode may still work. F05 displayed.
Conventional Oven Element Fault
F06
Display shows F06 and oven controls are unresponsive or erratic.
User Interface / Keypad Communication Fault
F07
Oven display shows F07 and the oven will not start heating.
Door Lock / Door Switch Fault (Pyro or Safety Interlock)
F08
Oven cuts out during use and displays F08, often after running for some time.
Overheat Safety Thermostat / Thermal Cut-Out Tripped
F09
Clock/timer flashes F09 and oven functions are disabled.
Clock / Timer Module Fault
F10
Top oven (in double oven models) not heating, F10 displayed when top oven is selected.
Top Oven Temperature Sensor Fault
F11
Fan runs continuously or not at all, with F11 error on display.
Cooling Fan Control Fault
F12
Display shows F12 and oven beeps, often after a power cut or surge.
EEPROM / Configuration Data Error
F13
Oven display shows F13 and interior light and fan may not operate.
Low Voltage / Power Supply Fault
F14
Pyrolytic self-clean cycle will not start, F14 displayed.
Pyrolytic System Fault
F15
Oven light and fan work but no heat, F15 displayed intermittently.
Relay Stuck / Heater Drive Fault
F16
Display shows F16 and the oven fan runs but temperature cannot be set correctly.
Temperature Calibration / Sensor Range Fault
F17
Oven display shows F17 and beeps continuously, no functions can be selected.
Stuck Key / Touch Panel Fault
F18
Oven shows F18 and may shut down unexpectedly during use.
Internal Temperature / Heat Sink Overheat Fault
Symptom
Condensation forms heavily on the oven door and drips onto the floor during cooking.
Excess Condensation / Steam Management Issue
Symptom
Control knobs become very stiff or difficult to turn.
Knob / Shaft Binding
Symptom
Grill in top oven works only on one side or heats unevenly.
Dual Grill Element Partial Failure
Symptom
Oven cabinet sides and control panel become excessively hot during normal cooking.
Cooling / Ventilation Deficiency
Symptom
Oven cavity light and fan come on as soon as power is applied, even with controls off.
Stuck Relay or Shorted Selector Contacts
Symptom
Oven clock/timer display is blank, but oven may still heat using manual controls.
Clock / Display Power Loss
Symptom
Oven does not heat at all, no error code, fan and light may or may not work.
No Heat Condition – General Power or Heating Circuit Failure
Symptom
Oven door glass has become loose or rattles when opening/closing.
Door Glass Mounting / Bracket Failure
Symptom
Oven door seal is damaged or heat escapes around the door, causing surrounding cabinets to overheat.
Door Gasket / Seal Failure
Symptom
Oven door will not close fully, leaving a gap and causing heat loss.
Door Hinge / Hinge Receiver Wear
Symptom
Oven door will not open after use (non-pyro model), feels jammed.
Mechanical Door Latch Jam
Symptom
Oven emits a strong burning smell or smoke during use.
Contamination / Residue Burning
Symptom
Oven enamel is flaking or rust spots appear inside the cavity.
Cavity Enamel Degradation
Symptom
Oven fan runs loudly, with grinding or rattling noise during operation.
Fan Bearing Wear / Fan Blade Damage
Symptom
Oven heats but takes a very long time to reach temperature or never gets fully hot.
Partial Heating / Weak Heating
Symptom
Oven interior light does not work, but oven heats normally.
Oven Lamp Failure
Symptom
Oven light works but fan does not run in fan oven mode.
Oven Circulation Fan Failure
Symptom
Oven makes a metallic clicking or popping noise as it heats and cools.
Thermal Expansion Noise
Symptom
Oven overheats and burns food even at low settings, no error code.
Thermostat Stuck Closed / Sensor Misreading
Symptom
Oven temperature is inaccurate compared to the set temperature (too hot or too cold) without showing an error.
Temperature Calibration Drift
Symptom
Oven trips the circuit breaker or RCD when turned on or when a specific function is selected.
Electrical Short or Earth Leakage
Symptom
Oven will not start unless the clock is set, user cannot figure out how to set it.
Clock Not Set / Auto Mode Engaged
Symptom
Timer alarm is very quiet or does not sound at all.
Buzzer / Sounder Failure
Symptom
Top oven in a double oven unit does not heat, but bottom oven works normally (no code).
Secondary (Top) Oven Heating Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
Oven will not heat, display shows F01 shortly after a cooking program is selected.
|
Main Oven Temperature Sensor Circuit Fault | View Details |
| F02 |
Oven overheats, may burn food quickly, and displays F02 or shuts down mid-cycle.
|
Oven Overtemperature / Sensor Range Error | View Details |
| F03 |
Fan oven not heating, fan runs but no heat, F03 displayed.
|
Fan Oven Heating Element Circuit Fault | View Details |
| F04 |
Grill does not heat or cuts out, F04 shown on display when grill is selected.
|
Grill Element / Grill Circuit Fault | View Details |
| F05 |
Main oven not heating on conventional (top/bottom) mode, but fan mode may still work. F05 displayed.
|
Conventional Oven Element Fault | View Details |
| F06 |
Display shows F06 and oven controls are unresponsive or erratic.
|
User Interface / Keypad Communication Fault | View Details |
| F07 |
Oven display shows F07 and the oven will not start heating.
|
Door Lock / Door Switch Fault (Pyro or Safety Interlock) | View Details |
| F08 |
Oven cuts out during use and displays F08, often after running for some time.
|
Overheat Safety Thermostat / Thermal Cut-Out Tripped | View Details |
| F09 |
Clock/timer flashes F09 and oven functions are disabled.
|
Clock / Timer Module Fault | View Details |
| F10 |
Top oven (in double oven models) not heating, F10 displayed when top oven is selected.
|
Top Oven Temperature Sensor Fault | View Details |
| F11 |
Fan runs continuously or not at all, with F11 error on display.
|
Cooling Fan Control Fault | View Details |
| F12 |
Display shows F12 and oven beeps, often after a power cut or surge.
|
EEPROM / Configuration Data Error | View Details |
| F13 |
Oven display shows F13 and interior light and fan may not operate.
|
Low Voltage / Power Supply Fault | View Details |
| F14 |
Pyrolytic self-clean cycle will not start, F14 displayed.
|
Pyrolytic System Fault | View Details |
| F15 |
Oven light and fan work but no heat, F15 displayed intermittently.
|
Relay Stuck / Heater Drive Fault | View Details |
| F16 |
Display shows F16 and the oven fan runs but temperature cannot be set correctly.
|
Temperature Calibration / Sensor Range Fault | View Details |
| F17 |
Oven display shows F17 and beeps continuously, no functions can be selected.
|
Stuck Key / Touch Panel Fault | View Details |
| F18 |
Oven shows F18 and may shut down unexpectedly during use.
|
Internal Temperature / Heat Sink Overheat Fault | View Details |
| – |
Condensation forms heavily on the oven door and drips onto the floor during cooking.
|
Excess Condensation / Steam Management Issue | View Details |
| – |
Control knobs become very stiff or difficult to turn.
|
Knob / Shaft Binding | View Details |
| – |
Grill in top oven works only on one side or heats unevenly.
|
Dual Grill Element Partial Failure | View Details |
| – |
Oven cabinet sides and control panel become excessively hot during normal cooking.
|
Cooling / Ventilation Deficiency | View Details |
| – |
Oven cavity light and fan come on as soon as power is applied, even with controls off.
|
Stuck Relay or Shorted Selector Contacts | View Details |
| – |
Oven clock/timer display is blank, but oven may still heat using manual controls.
|
Clock / Display Power Loss | View Details |
| – |
Oven does not heat at all, no error code, fan and light may or may not work.
|
No Heat Condition – General Power or Heating Circuit Failure | View Details |
| – |
Oven door glass has become loose or rattles when opening/closing.
|
Door Glass Mounting / Bracket Failure | View Details |
| – |
Oven door seal is damaged or heat escapes around the door, causing surrounding cabinets to overheat.
|
Door Gasket / Seal Failure | View Details |
| – |
Oven door will not close fully, leaving a gap and causing heat loss.
|
Door Hinge / Hinge Receiver Wear | View Details |
| – |
Oven door will not open after use (non-pyro model), feels jammed.
|
Mechanical Door Latch Jam | View Details |
| – |
Oven emits a strong burning smell or smoke during use.
|
Contamination / Residue Burning | View Details |
| – |
Oven enamel is flaking or rust spots appear inside the cavity.
|
Cavity Enamel Degradation | View Details |
| – |
Oven fan runs loudly, with grinding or rattling noise during operation.
|
Fan Bearing Wear / Fan Blade Damage | View Details |
| – |
Oven heats but takes a very long time to reach temperature or never gets fully hot.
|
Partial Heating / Weak Heating | View Details |
| – |
Oven interior light does not work, but oven heats normally.
|
Oven Lamp Failure | View Details |
| – |
Oven light works but fan does not run in fan oven mode.
|
Oven Circulation Fan Failure | View Details |
| – |
Oven makes a metallic clicking or popping noise as it heats and cools.
|
Thermal Expansion Noise | View Details |
| – |
Oven overheats and burns food even at low settings, no error code.
|
Thermostat Stuck Closed / Sensor Misreading | View Details |
| – |
Oven temperature is inaccurate compared to the set temperature (too hot or too cold) without showing an error.
|
Temperature Calibration Drift | View Details |
| – |
Oven trips the circuit breaker or RCD when turned on or when a specific function is selected.
|
Electrical Short or Earth Leakage | View Details |
| – |
Oven will not start unless the clock is set, user cannot figure out how to set it.
|
Clock Not Set / Auto Mode Engaged | View Details |
| – |
Timer alarm is very quiet or does not sound at all.
|
Buzzer / Sounder Failure | View Details |
| – |
Top oven in a double oven unit does not heat, but bottom oven works normally (no code).
|
Secondary (Top) Oven Heating Failure | View Details |
No matching codes found
Advertisements