Magic Chef Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Cooktop or range display shows E0 and some touch controls may not respond.
Touch Control Calibration or No Pan Detected (Induction/Glass Models)
E1
Cooktop or range display shows E1 and the affected burner will not heat.
Cooktop Temperature Sensor or Thermistor Error
E2
Cooktop shows E2 and shuts down the affected burner, often after extended high-heat use.
Cooktop Over-Temperature Protection
E3
Cooktop or range display shows E3 and one or more burners will not operate.
Internal Cooktop Communication or Power Board Error
E4
Induction or glass cooktop shows E4 and shuts down the affected zone.
Induction Coil or Power Module Overcurrent/Short
E5
Cooktop displays E5 and may not respond to touch inputs.
Touch Control Panel Overheat or Sensor Error
F0
Display shows F0 and oven controls may be disabled or behave erratically.
General EOC Fault or Keypad Error
F1
Electronic control beeps continuously, display shows F1 and oven functions are disabled or shut off shortly after starting.
Electronic Oven Control (EOC) Keypad or Control Board Failure
F10
Display shows F10 and oven may continue heating uncontrollably or shut down.
Runaway Oven Temperature / Overheat
F11
Display shows F11 and continuous beeping may occur.
Keypad Shorted or Stuck Key
F13
Display shows F13 and oven temperature display may be inaccurate or blank.
Oven Temperature Calibration or Data Error
F2
Oven shuts off and displays F2 during or shortly after a bake or broil cycle, often when very hot.
Oven Over-Temperature or Stuck Relay
F3
Display shows F3 and oven will not heat or shuts down shortly after starting a cycle.
Oven Temperature Sensor Circuit Open
F4
Display shows F4 and oven may not heat correctly or may shut off unexpectedly.
Oven Temperature Sensor Circuit Shorted
F5
Display shows F5 and oven functions are disabled or intermittent.
Oven Door Lock or Latch Switch Failure (Self-Clean Models)
F7
Display shows F7, often accompanied by random beeping or unresponsive keypad.
Keypad Short or Stuck Key Error
F8
Display shows F8, oven may not start self-clean or may stop mid-cycle.
Oven Door Lock Circuit Error (Self-Clean)
F9
Display shows F9 and oven door may remain locked or will not lock for self-clean.
Door Lock Failure or Latch Not Engaging
LOC
Display shows LOC or a lock icon; oven and/or cooktop controls do not respond to input.
Control Panel Child Lock Activated
PF
Display shows PF and clock resets; oven may stop mid-cycle during power events.
Power Failure Indication
Symptom
Clock and display are blank; oven and cooktop do not work.
No Power to Range or Failed Control Board
Symptom
Control knobs are hard to turn or feel loose and wobbly.
Worn or Contaminated Valve Stems / Knob Hubs
Symptom
Convection fan does not run in convection mode; baking is uneven.
Convection Fan Failure
Symptom
Cooktop glass is cracked or shattered.
Damaged Glass Cooktop
Symptom
Electric oven will not broil; bake works normally.
Open Broil Element Circuit
Symptom
Electric oven will not heat on bake; broil may still work.
Open Bake Element Circuit
Symptom
Electric surface element does not heat at all.
Open Surface Element or Infinite Switch Failure
Symptom
Gas oven lights but temperature is too low or fluctuates widely; food undercooked or overcooked.
Oven Temperature Regulation Problem
Symptom
Gas oven will not ignite; broil may work but bake does not heat.
Bake Igniter Failure
Symptom
Gas surface burner will not light; clicking sound may be present or absent.
Surface Burner Ignition Failure
Symptom
Oven door will not close fully or has a gap; heat escapes around the door.
Door Hinge or Gasket Failure
Symptom
Oven door will not unlock after self-clean cycle completes.
Stuck Self-Clean Door Lock
Symptom
Oven fan runs continuously, even when the oven is off and cool.
Stuck Cooling or Convection Fan Circuit
Symptom
Oven light does not work even after replacing the bulb.
Oven Light Circuit Failure
Symptom
Oven or cooktop emits a strong chemical or plastic smell when heating.
Off-Gassing from New Components or Contaminants
Symptom
Oven produces excessive smoke during use, especially on first use or at high temperatures.
Residue or Grease Burn-Off
Symptom
Range or cooktop trips the circuit breaker when turned on.
Electrical Short or Overload
Symptom
Range storage drawer is difficult to open/close or falls off the tracks.
Misaligned or Damaged Storage Drawer Rails
Symptom
Strong gas smell around the range, especially when burners are off.
Gas Leak
Symptom
Surface burner lights but flame is very weak or uneven.
Improper Gas Flow to Surface Burner
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Cooktop or range display shows E0 and some touch controls may not respond.
|
Touch Control Calibration or No Pan Detected (Induction/Glass Models) | View Details |
| E1 |
Cooktop or range display shows E1 and the affected burner will not heat.
|
Cooktop Temperature Sensor or Thermistor Error | View Details |
| E2 |
Cooktop shows E2 and shuts down the affected burner, often after extended high-heat use.
|
Cooktop Over-Temperature Protection | View Details |
| E3 |
Cooktop or range display shows E3 and one or more burners will not operate.
|
Internal Cooktop Communication or Power Board Error | View Details |
| E4 |
Induction or glass cooktop shows E4 and shuts down the affected zone.
|
Induction Coil or Power Module Overcurrent/Short | View Details |
| E5 |
Cooktop displays E5 and may not respond to touch inputs.
|
Touch Control Panel Overheat or Sensor Error | View Details |
| F0 |
Display shows F0 and oven controls may be disabled or behave erratically.
|
General EOC Fault or Keypad Error | View Details |
| F1 |
Electronic control beeps continuously, display shows F1 and oven functions are disabled or shut off shortly after starting.
|
Electronic Oven Control (EOC) Keypad or Control Board Failure | View Details |
| F10 |
Display shows F10 and oven may continue heating uncontrollably or shut down.
|
Runaway Oven Temperature / Overheat | View Details |
| F11 |
Display shows F11 and continuous beeping may occur.
|
Keypad Shorted or Stuck Key | View Details |
| F13 |
Display shows F13 and oven temperature display may be inaccurate or blank.
|
Oven Temperature Calibration or Data Error | View Details |
| F2 |
Oven shuts off and displays F2 during or shortly after a bake or broil cycle, often when very hot.
|
Oven Over-Temperature or Stuck Relay | View Details |
| F3 |
Display shows F3 and oven will not heat or shuts down shortly after starting a cycle.
|
Oven Temperature Sensor Circuit Open | View Details |
| F4 |
Display shows F4 and oven may not heat correctly or may shut off unexpectedly.
|
Oven Temperature Sensor Circuit Shorted | View Details |
| F5 |
Display shows F5 and oven functions are disabled or intermittent.
|
Oven Door Lock or Latch Switch Failure (Self-Clean Models) | View Details |
| F7 |
Display shows F7, often accompanied by random beeping or unresponsive keypad.
|
Keypad Short or Stuck Key Error | View Details |
| F8 |
Display shows F8, oven may not start self-clean or may stop mid-cycle.
|
Oven Door Lock Circuit Error (Self-Clean) | View Details |
| F9 |
Display shows F9 and oven door may remain locked or will not lock for self-clean.
|
Door Lock Failure or Latch Not Engaging | View Details |
| LOC |
Display shows LOC or a lock icon; oven and/or cooktop controls do not respond to input.
|
Control Panel Child Lock Activated | View Details |
| PF |
Display shows PF and clock resets; oven may stop mid-cycle during power events.
|
Power Failure Indication | View Details |
| – |
Clock and display are blank; oven and cooktop do not work.
|
No Power to Range or Failed Control Board | View Details |
| – |
Control knobs are hard to turn or feel loose and wobbly.
|
Worn or Contaminated Valve Stems / Knob Hubs | View Details |
| – |
Convection fan does not run in convection mode; baking is uneven.
|
Convection Fan Failure | View Details |
| – |
Cooktop glass is cracked or shattered.
|
Damaged Glass Cooktop | View Details |
| – |
Electric oven will not broil; bake works normally.
|
Open Broil Element Circuit | View Details |
| – |
Electric oven will not heat on bake; broil may still work.
|
Open Bake Element Circuit | View Details |
| – |
Electric surface element does not heat at all.
|
Open Surface Element or Infinite Switch Failure | View Details |
| – |
Gas oven lights but temperature is too low or fluctuates widely; food undercooked or overcooked.
|
Oven Temperature Regulation Problem | View Details |
| – |
Gas oven will not ignite; broil may work but bake does not heat.
|
Bake Igniter Failure | View Details |
| – |
Gas surface burner will not light; clicking sound may be present or absent.
|
Surface Burner Ignition Failure | View Details |
| – |
Oven door will not close fully or has a gap; heat escapes around the door.
|
Door Hinge or Gasket Failure | View Details |
| – |
Oven door will not unlock after self-clean cycle completes.
|
Stuck Self-Clean Door Lock | View Details |
| – |
Oven fan runs continuously, even when the oven is off and cool.
|
Stuck Cooling or Convection Fan Circuit | View Details |
| – |
Oven light does not work even after replacing the bulb.
|
Oven Light Circuit Failure | View Details |
| – |
Oven or cooktop emits a strong chemical or plastic smell when heating.
|
Off-Gassing from New Components or Contaminants | View Details |
| – |
Oven produces excessive smoke during use, especially on first use or at high temperatures.
|
Residue or Grease Burn-Off | View Details |
| – |
Range or cooktop trips the circuit breaker when turned on.
|
Electrical Short or Overload | View Details |
| – |
Range storage drawer is difficult to open/close or falls off the tracks.
|
Misaligned or Damaged Storage Drawer Rails | View Details |
| – |
Strong gas smell around the range, especially when burners are off.
|
Gas Leak | View Details |
| – |
Surface burner lights but flame is very weak or uneven.
|
Improper Gas Flow to Surface Burner | View Details |
No matching codes found
Advertisements